ACT7PT532-4 ACT7PVT532-4 The ACT7PT532-4 and ACT7PVT532-4 family is a range of SMD TXCO/VCTCXO housed in a ceramic package either a grounded metal lid. The grounded lid will assist with EMI reduction and the seam welded construction offers good long term stability. The device is offered in a range of supply voltage options from 2.5V to 3.3V and a frequency stability from +/-3ppm. The output is either sine wave or clipped sine wave. Its small size makes this device suitable for a large range of consumer applications including wireless, set top box, PLL, hand sets, WIFI, and GPS. Specification Parameter Symbol Frequency Range f0 Output Specification Condition 13.00 ~ 26.00 MHz Please specify Clipped sine or Sine Supply Voltage (±0.1V) Vdd 2.5Vdc Supply Current maximum Iop Supply Current typical Iop Output Load N/CL Output Level VOUT Control Voltage VCNT Pulling minimum Pulling maximum 3.0Vdc Please specify 3.3Vdc Please specify 1.5mA 1.3mA AC coupled into 10KΩ//10pF 0.6V pk-pk min 1.25±1.25V 1.4±1.4V 1.5±1.5V 1.65±1.65V ACT7PVT-532-4 only Df/VCNT ±8.75ppm ±9.8ppm ±10.5ppm ±11.55ppm ACT7PVT-532-4 only Df/VCNT ±20ppm ±22.4ppm ±24ppm ±26.4ppm ACT7PVT-532-4 only Slope Frequency Stability Vs Topr 2.8Vdc Df/f0 Positive ACT7PVT-532-4 only ±3.0ppm (standard) others available enquire Frequency Stability Vs Load ±0.3ppm max ±10% Frequency Stability Vs Vdd ±0.3ppm max ±0.1V others available enquire Operating Temperature Range Topr -30 ~ +85°C Storage Temperature Range Tstg -40 ~ +85°C Start-up Time Tosc Df/f0 ±1.0ppm/year max Aging 5mS max -130dBc/Hz Typical Phase Noise Harmonics -5dBc max Frequency Tolerance ±2.0ppm Frequency Tolerance after 2 x Reflow Processes. ±2.0ppm @ 25°C 265°C 10sec max total time 500sec max See diagram page 2 Re-flow condition @ 25°C Lead Free - RoHS comp. Pad surface material 0.3-0.6um Au over 2-6um Ni Please note that all parameters can not necessarily be specified in the same device. Customer to specify: VCTCXO or TCXO, Frequency, Output, Vdd, Stability and Temperature n line with our ongoing policy of product evolvement the above specification may be subject to change without notice. ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre: Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Page 1 of 3 Issue 1T6 Date 21/09/2005 ACT7PT532-4 ACT7PVT532-4 Reflow Diagram n line with our ongoing policy of product evolvement the above specification may be subject to change without notice. ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre: Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK Issue 1T6 http://www.actcrystals.com Date Page 2 of 3 21/09/2005 ACT7PT532-4 ACT7PVT532-4 Tape and Reel Information n line with our ongoing policy of product evolvement the above specification may be subject to change without notice. ISO9001:200 Registered For quotations or further information please contact us at: 3 The Business Centre: Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue 1T6 Date Page 3 of 3 21/09/2005