Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT8MSV - 4/6 The ACT8MSV-4 is a family of 4/6-pad surface mount Voltage Controlled Crystal Oscillators (VCXO) housed in a11.4 x 9.6 mm package with a metal lid. These devices can be pulled between ±30ppm & ±200ppm from the nominal frequency by varying the voltage on pin 1(dependant on VDD). A low noise (LN) version is available on request. Applications include PLL circuits, Set Top Box, MP3 Players, Audio/Video modulations, Video Game Consoles, HDTV and many more. Specification Parameter Symbol Supply Voltage Frequency Range VDD fo Frequency Stability Temp Operating Range Storage Temp Range Supply Current Duty Cycle Rise & Fall Time Output Logic Output Load Output Voltage Δf/fo Topr Tstg Iop Tw/t Tr/Tf N/CL VOL VOH Voltage Control Pulling Range Linearity Slope Polarity Modulation Bandwidth(±3dB) Input Impedance Start Up Time Aging Vc Δfc Tosc Fa Jitter one sigma, (155.520MHz),5V Jitter one sigma, (155.520MHz),5V Specification 3.3VDC ±5% 5.0VDC ±5% max 0~70°C 3.3V 500KHz ~ 125MHz 0~70°C 5.0V 500KHz ~156MHz -40~85°C 3.3V 500KHz ~ 90MHz -40~85°C 5.0V 500KHz~140MHz Low Noise (LN) version 3.3 &5.0V 10~170MHz ±25ppm ~ 100ppm ±25ppm not available on some versions. 0 to +70°C (std) & -40 ~ +85°C -40 to 85°C 15 ~45mA 40/60% 5nS max 2nS typical (LN 3nS typical) TTL or HCMOS (LN HCMOS Only) 10TTL / 15~50pF HCMOS TTL 0.4 V max 0.4 V max 0.33 V max 0.5 V max CMOS 0.4 V max 0.4 V max CMOS(LN) TTL 2.4 V min 2.4 V Min CMOS 2.97 V min VDD-0.5 V Min CMOS(LN) 2.4 V min VDD-0.5 V Min 0.3 ~3.0V Nominal fo 1.65±0.2V 0.5~4.5V Nominal fo 2. ±30 ~ ±150ppm ±80 ~ ±200ppm 10% max (6% typical) Monotonic and Positive (negative available on request) 10 KHz min 10KΩ @ 10KHz min 10mS max ( 5mS typical) ± 5ppm / year max Condition Please specify Please specify Please specify Frequency dependant Please specify @25°C 25ps typical, 28ps max LN 20ps typical, 25ps max DIMENSIONS (mm) Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Operating Temperature Range, Supply Voltage & Symmetry In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 2 Issue 1 M6 Date: 06/09/04 Tel : Fax : email : WAVEFORM 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] VOLTAGE CONTROL CHARACTERISTIC LOW NOISE (LN) VERSION: SOLDERING CONDITIONS Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Operating Temperature Range, Supply Voltage & Symmetry In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 2 of 2 Issue 1 M6 Date: 06/09/04