Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTF8002/864.0/DCC6C is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6C case for wireless audio application. It provides Low amplitude ripple and high image frequency suppression. 1.Package Dimensions (DCC6C) 2. Pin Configuration 2 Input / Output 5 Output / Input others Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 0.6 E 1.1 B 1.5 F 3.0 C 1.5 G 3.0 D 1.8 3.Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4. Frequency Characteristics 5.Performance 5-1.Maximum Ratings Rating Input Power Level DC Voltage Storage Temperature Soldering Temperature Value Units 10 dBm 12V VDC -40 to +85 °C +235 °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5-2.Electronic Characteristics Item Specifications Nominal Center Frequency (f C) Insertion Loss (within fC+/-1.0MHz) 864.000 MHz 4.5dB max. Absolute Attenuation 1) within 820 … 823 MHz 40dB min. 2) within 841 … 844 MHz 35dB min. 3) within 884 … 887 MHz 35dB min. 4) within 905 … 908 MHz 40dB min. Ripple Deviation (within f C+/-1.0MHz) 1.5dB max. Input / Output Impedance(Nominal) 50 Ω iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04