Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTQ965/868.35/QCC8C is a two-port, 180° surface-acoustic-wave (SAW) resonator in a surface-mount ceramic QCC8C case. It provides reliable, fundamental-mode, quartz frequency stabilization i.e. in transmitters or local oscillators operating at 868.350 MHz. 1.Package Dimension (QCC8C) 2. Pin Configuration 2 Input / Output 6 Input / Output 4,8 Case Ground 1,3,5,7 Empty Sign Data (unit: mm) Sign Data (unit: mm) A 2.08 E 1.2 B 0.6 F 1.35 C 1.27 G 5.0 D 2.54 H 5.0 3.Equivalent LC Model and Test Circuit 4.Typical Application Circuits 1) Low-Power Transmitter Application 2) Local Oscillator Application In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5.Typical Frequency Response 6.Temperature Characteristics 7.Performance 7-1.Maximum Ratings Rating CW RF Power Dissipation DC Voltage Between Terminals Case Temperature Soldering Temperature Value Units 10 dBm ±30V VDC -40 to +85 °C +250 °C 7-2.Electronic Characteristics Characteristics Centre Frequency (+25°C) Sym Minimum Absolute Frequency fC 868.200 Tolerance from 868.350 MHz ∆fC ±150 IL 6.5 Unloaded Q QU 6,260 50 Ω Loaded Q QL 3,300 Turnover Temperature T0 Turnover Frequency f0 fc kHz FTC 0.03 ppm/°C |fA| ≤10 ppm/yr Insertion Loss Quality Factor Temperature Stability Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year DC Insulation Resistance Between Any Two Terminals RF Equivalent RLC Model Typical 25 Maximum Units 868.500 MHz kHz 8.0 dB 55 °C 1.0 MΩ Motional Resistance RM 111.35 Motional Inductance LM 127.8974 Motional Capacitance CM Shunt Static Capacitance C0 151 1.35 Ω µH 0.2629 1.20 2 fF 1.50 pF iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 1. 2. 3. 4. 5. 6. 7. 8. 9. The frequency fC is the frequency of minimum IL with the resonator in the specified test fixture in a 50 Ω test system with VSWR≤1.2:1. Unless noted otherwise, case temperature T C = +25°C±2°C. Frequency aging is the change in f C with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f 0. The nominal frequency at 2 any case temperature, TC, may be calculated from: f = f 0 [1 - FTC (T 0 - TC) ]. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C 0 is the measured static (non-motional) capacitance between input terminal and ground or output terminal and ground. The measurement includes case parasitic capacitance. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB bandwidth, fC versus TC, and C0. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 3 Issue : 1 C1 Date : SEPT 04