ACT ACTZTB

Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT ZTB Through Hole Resonators
The ACT ZTB family of Ceramic Through Hole Resonators offers a cost effective solution for applications
requiring good stability over a wide temperature range, together with accuracy.
Specification
Part Type/
Frequency
Frequency
Resonant
Stability over
Aging over
Number
range KHz
accuracy
imp. (W)
temp. range
10 years
(-20 +80°C)(%)
(%)
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
±0.3
@25°C
ZTB
190 ~ 249
±1KHz
250 ~ 374
±1KHz
375 ~ 429
±2KHz
430 ~ 509
±2KHz
510 ~ 699
±2KHz
700 ~ 1000
±0.5%
1001 ~ 1250 ±0.5%
Vibration Mode: Area vibration
Dimensions Type No.
mm
ZTB
Freq. (KHz)
190 ~ 249
250 ~ 374
375 ~ 410
411 ~ 699
700 ~ 1250
Tolerance
<20
<20
<20
<20
<30
<70
<100
Ext. Capacitance
(pF)
C1
C2
330
220
120
100
100
100
100
470
470
470
100
100
100
100
H
14.7
12.2
9.3
9.0
6.3
W
13.5
11.0
7.9
7.0
5.1
D
3.8
3.8
3.6
3.5
2.3
P
10.0
7.7
5.0
5.0
2.5
L
8.0
7.0
7.7
4.0~6.0
4.0
T2/T3
0.9/0.15
0.9/0.15
0.9/0.15
0.9/0.23
0.7/0.23
+/-0.5
+/-0.5
+/-0.5
+/-0.5
+/-0.5
+/-0.1 / +/-0.05
Important note when using Ceramic resonators with micro controllers
Some resonator parameters vary considerably with frequency and physical construction/size . These
differences are too great to be able to be practically shown in a data sheet.
However these parameters can be critical when the resonators are used with micro controllers. Even if two
different resonators appear to have the same specification the typical values of these critical parameters can be
considerably different. When enquiring about resonators for use with micro controllers it is important to supply
the make and part number of the IC to be used and/or the list of recommended resonators if this is given.
Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
Issue :7 C1r
http://www.actcrystals.com
Date :17/08/06