0910-60M 0910 – 60M 60 Watts - 40 Volts, 150µs, 5% Radar 890 - 1000 MHz GENERAL DESCRIPTION The 0910-60M is an internally matched, COMMON BASE transistor capable of providing 60 Watts of pulsed RF output power at 150 µs pulse width, 5% duty factor across the band 890 to 1000 MHz. This hermetically solder-sealed transistor is specifically designed for P-Band radar applications. It utilizes gold metallization to provide high reliability. CASE OUTLINE 55AW-1 ABSOLUTE MAXIMUM RATINGS Maximum Power Dissipation @ 25oC Maximum Voltage and Current BVces Collector to Emitter Voltage BVebo Emitter to Base Voltage Ic Collector Current Maximum Temperatures Storage Temperature Operating Junction Temperature 180 Watts 65 Volts 3.5 Volts 8 Amps - 65 to + 200oC + 200oC ELECTRICAL CHARACTERISTICS @ 25 OC SYMBOL CHARACTERISTICS Pout Pg ηc Pd Rl VSWR1 VSWRs Power Out Power Gain Collector Efficiency Pulse Droop Input Return loss Load Mismatch Tolerance Load Mismatch - Stability TEST CONDITIONS MIN TYP Freq = 890 – 1000 MHz Vcc = 40 Volts Pin = 9.5 Watts 60 8.0 40 8.5 45 Pulse Width = 150µs Duty Factor = 5% -9 MAX UNITS 84 Watts dB % dB dB 0.5 3:1 2:1 Note 1: Pulse condition of 150µsec, 5%. Bvces Ices Iebo θjc1 Collector to Emitter Breakdown Collector to Emitter Leakage Emitter to Base Leakage Thermal Resistance Ic = 40 mA Vce = 40 Volts Vebo = 3.0 Volts Rated Pulse Condition 65 10 8 1.0 Volts mA mA o C/W Issue December 2005 ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324 0910-60M 0910– 60M Performance Curves – Pin vs. Pout Pin vs. Gain 90.0 10.00 80.0 9.00 8.00 60.0 Gain (dB) Pout (W) 70.0 50.0 40.0 890 MHz 30.0 936 MHz 890 MHz 6.00 936 MHz 5.00 4.00 20.0 1000 MHz 10.0 7.00 1000 MHz 3.00 2.00 0.0 33 34 35 36 37 38 39 40 33 41 34 35 36 37 38 39 40 41 Pin (dBm) Pin (dBm) Pin vs. Efficency 70 65 Efficency(%) 60 55 50 45 40 890 MHz 35 30 936 MHz 25 1000 MHz 20 15 10 33 34 35 36 37 38 39 40 41 Pin (dBm) Impedance Information Input Matching Circuit Output Matching Circuit 50 Ohms 50 Ohms ZSource Frequencies (MHz) Note 2: Z Load ZLoad Z Source (Ω) 890 4.4-j4.0 937 4.5-j3.3 1000 4.7-j2.5 exclusive of C5, C6 and bead on the test circuit Z Load (Ω) 2 2.8-j0.7 2.9-j0.0 3.2+j0.95 ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324 0910-60M 0910– 60M Test Circuit ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324 0910-60M 0910– 60M Case Outline ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324