2 2 3 1 1 3 27 2 T- 4 SO 4 Parallel APT2X31S20J APT2X31S20J 200V 45A DUAL DIE ISOTOP® PACKAGE HIGH VOLTAGE SCHOTTKY DIODES PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular SOT-227 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers • Low Leakage Current MAXIMUM RATINGS Symbol VR Density All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT2X31S20J UNIT 200 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 105°C, Duty Cycle = 0.5) 45 RMS Forward Current (Square wave, 50% duty) 81 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 320 IF(RMS) IFSM TJ,TSTG EAVL Operating and StorageTemperature Range Avalanche Energy (2A, 15mH) Amps -55 to 150 °C 30 mJ STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V TYP MAX IF = 30A .80 .85 IF = 60A .91 IF = 30A, TJ = 125°C .67 Volts VR = VR Rated 0.5 VR = VR Rated, TJ = 125°C 15 APT Website - http://www.advancedpower.com 150 UNIT mA 9-2004 VF MIN pF 053-6033 Rev C Symbol DYNAMIC CHARACTERISTICS APT2X31S20J Characteristic Symbol Test Conditions trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM MIN TYP - 55 ns - 190 nC - 6 - 100 ns - 450 nC - 9 - 70 ns - 960 nC - 24 Amps MIN TYP IF = 30A, diF/dt = -200A/µs VR = 133V, TC = 25°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 30A, diF/dt = -200A/µs VR = 133V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 30A, diF/dt = -700A/µs VR = 133V, TC = 125°C Maximum Reverse Recovery Current MAX - - UNIT Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance WT 1.04 20 Package Weight Torque MAX oz 29.2 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.7 0.6 0.5 0.4 0.3 0.2 0 Note: PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.2 0.8 10-5 Duty Factor D = t1/t2 SINGLE PULSE Peak TJ = PDM x ZθJC + TC 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL 9-2004 Junction temp (°C) 053-6033 Rev C t1 t2 0.1 0.05 Power (watts) 0.275 °C/W 0.00323 J/°C 0.443 °C/W 0.0490 J/°C 0.322 °C/W 0.282 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 1.03 Maximum Terminal & Mounting Torque 1.0 UNIT TYPICAL PERFORMANCE CURVES trr, REVERSE RECOVERY TIME (ns) 70 TJ = 150°C 60 50 40 TJ = 125°C 30 20 10 Qrr, REVERSE RECOVERY CHARGE (nC) 100 30A 80 15A 60 40 20 0 0 0.2 0.4 0.6 0.8 1 1.2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 1800 1600 1400 60A 1200 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 35 TJ = 125°C VR = 133V 1000 800 30A 600 15A 400 200 0 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change TJ = 125°C VR = 133V 30 60A 25 20 15 10 30A 15A 5 0 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 100 1.4 90 1.2 trr Qrr 80 1.0 70 0.8 trr IRRM IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 700A/µs) 60A TJ = -55°C IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 80 0.6 Qrr 0.4 60 50 40 30 20 0.2 0.0 TJ = 125°C VR = 133V TJ = 25°C 90 0 APT2X31S20J 120 100 10 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 Duty cycle = 0.5 TJ = 150°C 25 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 1200 9-2004 800 400 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-6033 Rev C CJ, JUNCTION CAPACITANCE (pF) 1600 APT2X31S20J Vr diF /dt Adjust +18V APT20M36BLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 3 0.25 IRRM 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions SOT-227 Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 1.95 (.077) 2.14 (.084) 9-2004 14.9 (.587) 15.1 (.594) 053-6033 Rev C 3.3 (.129) 3.6 (.143) 38.0 (1.496) 38.2 (1.504) 30.1 (1.185) 30.3 (1.193) Dimensions in Millimeters and (Inches) Parallel APT2X31S20J Cathode 1 Anode 1 Cathode 2 Anode 2 ISOTOP® is a Registered Trademark of SGS Thomson. APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.