PT-15SFA Product Bulletin (Preliminary) • June 2007 • PIN/TIA receiver module • High data rate, up to 15 Gb/s • High sensitivity, -16.5 dBm • 1200–1650 nm wavelength range • AC or DC coupled • MSA 17-pin package The PT-15SFA is a -16 dBm sensitivity, differential-output receiver module for Specifications OC-192 / STM-64 transmission system Minimum Typical Maximum Units transimpedance gain stage of 850 Ω. This Wavelength range 1200 1650 Bandwidth (-3dB electrical) 11.8 12.3 Low frequency cutoff1 30 Sensitivity2 -16.5 -15.5 Overload +3 Responsivity @ 1550 nm 0.7 0.75 Conversion gain (differential) 550 700 Output Return Loss (< 15 GHz) -10 Optical Return Loss -30 Power dissipation 0.27 combination produces a receiver with a DC Electrical 12.3 GHz bandwidth and conversion gain Photodiode voltage Amplifier voltage receive applications up to 15 Gb/s, providing overhead room for Forward Error Correction algorithms. It couples a high responsivity (0.7 A/W), back-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, with a of 700 V/W. Package type Operating temperature Storage temperature offered in a 17-pin MSA package with is available either AC- or DC-coupled. The receiver meets Telcordia GR-468 +6 +3.3 +7 +3.5 V V Mechanical The differential-output module is single-mode fiber input and the output +5 +3.1 nm GHz kHz dBm dBm A/W V/W dB dB W 1 With AC-coupled version 2 10 -12 BER, PRBS 231-1, 12.5 Gb/s -5 -40 17-pin surface mount +75 °C +85 °C qualification standards. PT-15SFA Product Specifications 25.76 3.00 1.00 17 12 11 2.00 1 6 5.40 8.00 7 3.00 10.50 3.45 1.65 10.75 Dimensions are in millimeters 13.75 Pin Description Pin Description 1 2 3 4 5 6 7 8 9 GND VPD NC Feedback Input NC GND GND Data Out Negative GND 10 11 12 13 14 15 16 17 Data Out Positive GND GND NC VAMP NC NC GND Application Notes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. PT-15SFA Ordering Information Base model PT-15SFA Option format Package option Coupling options Fiber connector options /Package/Coupling/Fiber connector 17LP AC or DC FC, SC or LC Temperature and fiber restrictions are as follows: Lead soldering: 250°C for no more than 10 seconds Fiber feed-through tube: 120°C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. Quality Vision Picometrix, LLC • 2925 Boardwalk Ann Arbor, MI • 48104 734-864-5600 • 734-998-3474 fax www.picometrix.com © 2007 Picometrix, LLC. All rights reserved. Specifications and output data subject to change without notice. PB-PT-15SFBA-0607-B PT-15SFA As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements.