AIMTEC AME15-15S

AME15 Series
15 watt encapsulated ac-dc converter
•
SWITCHING POWER MODULES FOR PCB MOUNTING
•
FULLY ENCAPSULATED PLASTIC CASE
•
UNIVERSAL INPUT RANGE 90 ... 260 VAC, 47 ... 440 Hz
•
REGULATED OUTPUT
•
LOW RIPPLE & NOISE
•
HIGH EFFICIENCY
•
CE, cUL APPROVALS
All specifications valid at nominal Input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. (Single Output)
AME15-5S
AME15-12S
AME15-15S
AME15-24S
Max output wattage (W)
15W
15W
15W
15W
Voltage
90 ... 260 VAC or 120 ... 370 VDC
Frequency (Hz)
47 ... 440 Hz
Current (Full Load)
280mA max. (115 VAC) / 170mA max. (230 VAC)
Input
Inrush Current (<2ms)
10 A max. (115 VAC) / 20 A max. (230VAC)
Leakage Current
0.75mA max.
External Fuse (recommended)
1.5 A slow blow type
Voltage (VDC)
5V
12V
15V
24V
Voltage Accuracy
±2%
Current (mA) max.
3000
1250
1000
625
Line Regulation (typ.)
±0.5%
Load Regulation (typ.)
±0.5%
Output
Minimum Load
0%
Maximum Capacitive Load
470-23,000m F depending on model
Noise
<0.5% Vout +50mV max (Vp-p)
Ripple
<0.2% Vout +40mV max (Vp-p)
Efficiency
75%
80%
80%
84%
Hold-up Time
15 ms min.
Switching Frequency
100 kHz
Over Current Protection
Hiccup technique, auto-recovery
Protection
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
Input-Output (VAC)
3000V
Isolation
Input-FG (VAC)
1500V
Outut-FG (VAC)
500V
Operating Temperature
-25°C ... +71°C
Storage Temperature
-40°C ... +85°C
Environment Temperature Coefficient
0.02% / °C
Humidity
95% RH
MTBF
>210,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
2.91 x 2.13 x 0.87 inches (74.0 x 54.0 x 22.0 mm)
Case Material
Plastic resin + Fiberglass (flammability to UL 94V-0)
Physical
Weight
140g
Cooling Method
Free air convection
Safety
Agency Approvals
cUL, CE
EMI (Conducted & Radiated Emission)
EN 55022 class B
EMC
EMS (Noise Immunity)
EN 55024
Specifications are subject to change without notification
VISIT US AT WWW.AIMTEC.CA
Continued on next page
AC-DC CONVERTERS
ELECTRICAL SPECIFICATIONS
99
AME15 Series
15 watt encapsulated ac-dc converter
AC-DC CONVERTERS
ELECTRICAL SPECIFICATIONS
100
All specifications valid at nominal Input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. (Dual & Triple Output)
AME15-5D
AME15-12D
AME15-15D AME15-512T AME15-515T
Max output wattage (W)
15W
15W
15W
15W
10W
Voltage
90 ... 260 VAC or 120 ... 370 VDC
Frequency (Hz)
47 ... 440 Hz
Current (Full Load)
280mA max. (115 VAC) / 170mA max. (230 VAC)
Input
Inrush Current (<2ms)
10 A max. (115 VAC) / 20 A max. (230VAC)
Leakage Current
0.75mA max.
External Fuse (recommended)
1.5 A slow blow type
Voltage (VDC)
±5V
±12V
±15V
5/±12V
5/±15V
Voltage Accuracy
±2%
Current (mA) max.
±1500
±650
±500
2000/±200 2000/±150
Line Regulation (typ.)
±0.5%
±0.5%
±0.5%
±1%/±5%
±1%/±5%
Load Regulation (typ.)
±3%
±3%
±3%
±2%/±5%
±2%/±5%
5V 10% (200mA) 5V 10% (200mA)
Output
Minimum Load
0%
0%
0%
Maximum Capacitive Load
470-23,000m F depending on model
Noise
<0.5% Vout +50mV max (Vp-p)
Ripple
<0.2% Vout +40mV max (Vp-p)
Efficiency
75%
79%
79%
75%
75%
Hold-up Time
15 ms min.
Switching Frequency
100 kHz
Over Current Protection
Hiccup technique, auto-recovery
Protection
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
Input-Output (VAC)
3000V
Isolation
Input-FG (VAC)
1500V
Outut-FG (VAC)
500V
Operating Temperature
-25°C ... +71°C
Storage Temperature
-40°C ... +85°C
Environment Temperature Coefficient
0.02% / °C
Humidity
95% RH
MTBF
>210,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
2.91 x 2.13 x 0.87 inches (74.0 x 54.0 x 22.0 mm)
Case Material
Plastic resin + Fiberglass (flammability to UL 94V-0)
Physical
Weight
140g
Cooling Method
Free air convection
Safety
Agency Approvals
cUL, CE
EMI (Conducted & Radiated Emission)
EN 55022 class B
EMC
EMS (Noise Immunity)
EN 55024
Specifications are subject to change without notification
TO ORDER CALL 1-888-9-AIMTEC
AME15 Series
OUTLINE DIMENSIONS & PIN CONNECTIONS
MECHANICAL DIMENSION (Top View)
Single
Dual
Triple
1
2
3
4
5
6
7
8
FG
AC Input (N)
AC Input (L)
No pin
-DC Output
No pin
+DC Output
No pin
FG
AC Input (N)
AC Input (L)
No pin
-DC Output
Common
+DC Output
No pin
FG
AC Input (N)
AC Input (L)
-DC Output
Common
+DC Output
Common
+5V Output
DERATING
AC-DC CONVERTERS
BLOCK DIAGRAM
Pin
101
VISIT US AT WWW.AIMTEC.CA