DATA SHEET Part Number: SL12 22101 Ordering Different Lead Types: Inside Kinked Leads Outside Kinked Leads Use -A after Ametherm’s part # Use -B after Ametherm’s part # For example: to order an inside kinked lead use part number SL12 22101-A D D D T C B L S S S STRAIGHT LEADS OUTSIDE KINKED LEADS INSIDE KINKED LEADS Electrical Specifications: Mechanical Specifications: Resistance @ 25°C Max Steady State Current Up to 65°C Max Recommended Energy Rating (Joules) Actual Failure Point of Instantaneous Energy (Joules) Resistance @ 100% of Max Current Resistance @ 50% of Max Current Body Temperature @ 100% Current Rating Dissipation Constant Thermal Time Constant Material Type Dielectric Strength of Coating Max Operating Temp @ Max Current Max Recommended Capacitance @ 120VAC/240VAC 220.0 Ω ± 20% 1.0 A 30.0 J 65.0 J 4.20 Ω 8.14 Ω 142 °C 12mW/°C 50 seconds “L” 1000 VAC for 1.0 minute 65 °C 2000µF/500µF CSA File Number: #CA118061 D T Lead Diameter S L Straight Leads Coating Run Down B C 12.0 ± 0.5 mm 5.1 ± 0.2 mm 0.5 ± 0.1 mm 6.35 ± 0.60 mm 38.0 ± 9.00 mm 5.0 ± 1.0 mm 6.35 ± 0.60 mm 3.42 ± 0.50 mm Revision Date: March 19, 2003 Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701 Telephone: (800) 808-2434 (775) 884-2434 Fax: (775) 884-0670 www.ametherm.com