AMIS-710322-A4: 300dpi CIS Module Data Sheet 1.0 General Description The AMIS-710322-A4 (PI322MC-A4) is a contact image sensor (CIS) module, which uses MOS image sensor technology for highspeed performance and high sensitivity. The AMIS-710322-A4 is suitable for scanning A4 size (216mm) documents with 11.8 dots per millimeter (dpm) resolution. Applications include fax machines, game systems, a variety of mark readers, and other automation equipment requiring document scanners. 2.0 Key Features • • • • • • • • • Light source, lens and sensor are integrated into a single module 11.8dpm resolution, 216mm scanning length Up to 500µsec/line scanning speed with optional light source Wide dynamic range Analog output Yellow-green LED light source Compact size ≅ 14mm x 19.5mm x 232mm Low power Light weight 3.0 Functional Description The AMIS-710322-A4 imaging array consists of 27 sensors, AMIS-720341 (PI3041) produced by AMIS, which are cascaded to provide 2592 photo-detectors with their associated multiplex switches and a digital shift register, which controls its sequential readout. Mounted in the module is a one-to-one graded indexed micro lens array, which focuses the scanned documents to image onto its sensing plane. The on-board amplifier processes the video signal to produce a sequential stream of video at the video output pin of the AMIS-710322A4 module. Illumination is accomplished by means of an integrated LED light source. All components are housed in a small plastic housing which has a cover glass, which acts as the focal point for the object being scanned and protects the imaging array, micro lens assembly and LED light source from dust. I/O to the module is the 10-pin connector located on one end of the module. The cross section of the AMIS710322-A4 is shown in Figure 1 and the block diagram in Figure 2. AMI Semiconductor – July 06, M-20598-001 www.amis.com 1 AMIS-710322-A4: 300dpi CIS Module Figure 1: AMIS-710322-A4 Cross Section Figure 2: AMIS-710322-A4 Module Block Diagram (See Table 1 for Pin Out Designation) AMI Semiconductor – July 06, M-20598-001 www.amis.com 2 Data Sheet AMIS-710322-A4: 300dpi CIS Module Table 1: Pin Configuration Pin Number 1 2 3 4 5 6 7 8 9 10 Symbol Vout Gnd Vdd (+5 V) Vn (-5V to -12V) Gnd SP Gnd CP GLED VLED Data Sheet Names and Functions Analog video output Ground; 0V Positive power supply Negative power supply Ground; 0V Shift register start pulse Ground; 0V Sampling clock pulse Ground for the light source; 0V Supply for the light source 4.0 Operational Environment 4.1 Absolute Maximum Rating Table 2: Absolute Maximum Rating Parameter Power supply voltage Input clock pulse (high level) Input clock pulse (low level) Symbols Vdd Idd Vn In VLED ILED Vih Vil Maximum Rating 10 55 -15 10 12.5 0.6 Vdd – 0.5V -0.8 Units V ma V ma V A V V Symbols Top Hop Tstg Hstg Maximum Rating 0 to 50 10 to 85 -25 to +75 5 to 95 Units ° C % ° C % 4.2 Operating Environment Table 3: Operating Environment Parameter Operating temperature Operating humidity Storage temperature Storage humidity AMI Semiconductor – July 06, M-20598-001 www.amis.com 3 AMIS-710322-A4: 300dpi CIS Module Data Sheet 4.3 Electro-Optical Characteristics (25°C) ° Table 4: Electro-Optical Characteristics at 25 C Parameter Symbol Number of photo detectors Pixel-to-pixel spacing (1) Line scanning rate Tint (2) Clock frequency f Bright output voltage Video output (4) Bright output non-uniformity Up (5) Adjacent pixel non-uniformity Uadj (6) Dark non-uniformity Ud Dark output voltage Vd (7) Modulation transfer function MTF Notes: (1) (2) (3) (4) (5) (6) (7) (8) (9) Parameter 2592 84.7 865 3.0 1.0 <+/-30 <25 <100 <150 >50 Units Elements µm µsec MHz V % % mV mV % Note @ 3.0MHz clock frequency See Note 7 for MTF & DOF Tint: line scanning rate or integration time. Tint is determined by the interval of two start pulses (SP). The minimum integration time of 500us is available at a 5.2MHz pixel rate but it will require optional light sources. f: main clock frequency Vpavg = å Vp(n)/2592 Up = [(Vpmax - Vp) / Vp] x 100% or [(Vp - Vpmin) / Vp] x 100% Upadj = MAX[ | (Vp(n) - Vp(n+l) | / Vp(n)] x 100% Upadj is the non-uniformity percentage pixel to pixel Ud = Vdmax – Vdmin Vdmin is the minimum output on a black document (O.D.=0.8). Vdmax: maximum output voltage of a black document (O.D.= 0.8). MTF = [(Vmax - Vmin) / (Vmax + Vmin)] x 100 [%] Vmax: maximum output voltage at 75lp/in Vmin: minimum output voltage at 75lp/in O.D. = optical density lp / in: line pairs per inch 4.4 Recommended Operating Conditions ° Table 5: Recommended Operating Conditions at 25 C Item Symbol Power supply Vdd Vn VLED Idd Ivn ILED Input voltage at digital high Vih Input voltage at digital low Vil Clock frequency f Clock pulse high duty cycle Clock pulse high duration Integration time Tint Operating temperature Top Min. 4.5 -4.5 Vdd-1.0 0 Mean 5.0 -5 12 35 6.0 460 Vdd-.5 25 50 0.500* 25 Max. 5.5 -12 12.5 55 10.0 600 Vdd 0.8 5.5 5.0 50 Note: Tint (min.) is the lowest line integration time available with a 5.2MHz clock (see Note 1 under Optical Characteristics, Table 2). AMI Semiconductor – July 06, M-20598-001 www.amis.com 4 Units V V V ma ma ma V V MHz % ns ms ° C AMIS-710322-A4: 300dpi CIS Module Data Sheet 5.0 Switching Characteristics (25oC) Figure 3: Module Timing Diagram The switching characteristics for the I/O clocks are shown in Figure 3. See the timing symbol definitions in Table 6. Table 6: Symbol Definition for Timing Diagram (Figure 3) Item Symbol Clock cycle time to Clock pulse width tw Clock duty cycle Prohibit crossing time of SP tprh Data setup time tds Data hold time tdh Signal delay time tdl Signal sample and hold time tsh AMI Semiconductor – July 06, M-20598-001 www.amis.com Min. 0.2 50 25 15 20 20 50 120 Typ. Max. 4.0 75 5 Units µs ns % ns ns ns ns ns AMIS-710322-A4: 300dpi CIS Module 6.0 AMIS-710322-A4 Module and its Mechanical Dimensions This is an overview drawing of the module. A full size drawing is available upon request. Figure 4: 6.0 AMIS-710322-A4 Module and its Mechanical Dimensions AMI Semiconductor – July 06, M-20598-001 www.amis.com 6 Data Sheet AMIS-710322-A4: 300dpi CIS Module Data Sheet 7.0 Company or Product Inquiries For more information about AMI Semiconductor, our technology and our product, visit our Web site at: http://www.amis.com North America Tel: +1.208.233.4690 Fax: +1.208.234.6795 Europe Tel: +32 (0) 55.33.22.11 Fax: +32 (0) 55.31.81.12 Production Technical Data - The information contained in this document applies to a product in production. AMI Semiconductor and its subsidiaries (“AMIS”) have made every effort to ensure that the information is accurate and reliable. However, the characteristics and specifications of the product are subject to change without notice and the information is provided “AS IS” without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant information to verify that data being relied on is the most current and complete. AMIS reserves the right to discontinue production and change specifications and prices at any time and without notice. Products sold by AMIS are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. AMIS makes no other warranty, express or implied, and disclaims the warranties of noninfringement, merchantability, or fitness for a particular purpose. AMI Semiconductor's products are intended for use in ordinary commercial applications. These products are not designed, authorized, or warranted to be suitable for use in life-support systems or other critical applications where malfunction may cause personal injury. Inclusion of AMIS products in such applications is understood to be fully at the customer’s risk. Applications requiring extended temperature range, operation in unusual environmental conditions, or high reliability, such as military or medical life-support, are specifically not recommended without additional processing by AMIS for such applications. Copyright © 2006 AMI Semiconductor, Inc. AMI Semiconductor – July 06, M-20598-001 www.amis.com 7