ADR3410 50 Ω High Linearity 1 Watt Amplifier ADVANCED PRODUCT INFORMATION - Rev 0.1 FEATURES • • • • • • • • 1 Watt Output Power 850 to 2200 MHz Operation Bias Control Input for Linearity Adjustment 12.5 dB Gain at 2160 MHz +43 dBm Output IP3 at 2160 MHz 4 dB Noise Figure at 880 MHz Single +5 V Supply -40 to +85 °C Operation APPLICATIONS • • Driver Amplifiers for Multi-Carrier and Single Carrier Power Amplifiers in W-CDMA and PCS Base Stations ISM, Fixed Wireless and Satellite Systems S27 Package 8 Pin SOIC with Heat Slug PRODUCT DESCRIPTION The ADR3410 is a high performance, single-stage InGaP HBT amplifier designed for use in wireless infrastructure systems as a highly linear 1 Watt driver. Packaged in a surface mount 8 pin SOIC, the die is mounted to a heat slug, offering excellent thermal dissipation and high reliability. The device may be biased through an external inductor directly to a +5 V supply, and uses an internal active bias circuit with a current adjust input for linearity control. RFOUT /Supply RFIN Power Control Supply Active Bias Circuit Figure 1: Block Diagram 04/2003 ADR3410 GND at slug RFIN 1 8 RFOUT/VCC1 RFIN 2 7 RFOUT/VCC1 VPC 3 6 RFOUT/VCC1 5 RFOUT/VCC1 VCC2 Active Bias Circuit 4 Figure 2: Pinout (X-ray Top View) Table 1: Pin Description PIN NAME DESCRIPTION 1, 2 RFIN RF Inputs. 3 VPC Power control input. This voltage input to the active bias circuit has a direct linear relationship to the amplifier current. 4 VCC2 Supply voltage to active bias circuit. 5, 6, RFOUT / VCC1 RF Outputs, biased to supply voltage. 7, 8 slug 2 GND Ground ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003 ADR3410 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC1, VCC2) 0 +6 VDC Power Control Voltage (VPC) 0 +5 VDC RF Input Power - +15 +20 dBm Storage Temperature -40 +150 °C Junction Temperature - +200 °C COMMENTS at 880 MHz at 2160 MHz Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 850 - 2200 MHz Supply Voltage (VCC1, CC2,) +3.6 +5.0 +6 VDC Power Control Voltage (VPC) +2.0 - +4.5 VDC Case Temperature -40 - +85 °C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003 3 ADR3410 Table 4: Electrical Specifications (TA = +25 °C, VCC = +5 VDC, see Applications Circuits (1)) PARAMETER MIN TYP MAX UNIT COMMENTS 880 MHz 2160 MHz - 18.0 12.5 - dB VPC = +3.8 V VPC = +3.5 V Output 1dB Compression (P1dB) (2) 880 MHz 2160 MHz - +29 +29 - dBm VPC = +3.8 V VPC = +3.5 V Output Third-Order Intercept (OIP3) 880 MHz 2160 MHz - +43 +43 - dBm VPC = +3.8 V VPC = +3.5 V 880 MHz - 4 - dB VPC = +3.8 V (3) - -75 - dBc f = 880 MHz, VPC = +3.8 V Thermal Resistance (θJC) - 30 - °C/W Total Supply Current - 280 240 - mA f = 880 MHz, VPC = +3.8 V f = 2160 MHz, VPC = +3.5 V Power Control Current - 60 220 µA At VPC pin Gain: (S21) Noise Figure Adjacent Channel Power Ratio Notes: (1) Performance as measured on ANADIGICS test fixture, using the appropriate Application Circuit (see figures 3 & 4) (2) OIP3 is measured with two tones at 1 MHz spacing, +13 dBm output power per tone. (3) IS-95 modulation, +13 dBm channel power, ±885 KHz offset. ADR3410 39 pF 1 RFIN 12 pF 2 3 VPC 0.1 uF 4 RFIN RFOUT/VCC1 RFIN RFOUT/VCC1 VPC RFOUT/VCC1 VCC2 RFOUT/VCC1 39 pF 8 RFOUT 6 pF 7 6 5 15 nH VCC 0.1 uF 100 pF 33 pF All capacitors are muRata GRM39 series.The 15 nH inductor is a Coilcraft 0603CS series. Figure 3: 869 - 894 MHz Application Circuit (50 Ω Terminations) 4 ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003 ADR3410 ADR3410 15 pF 1 RFIN 3.3 pF 2 3 VPC 0.1 uF 4 RFIN RFOUT/VCC1 RFIN RFOUT/VCC1 VPC RFOUT/VCC1 VCC2 RFOUT/VCC1 15 pF 8 RFOUT 2 pF 7 6 5 8.2 nH VCC 0.1 uF 100 pF 33 pF All capacitors are muRata GRM39 series.The 8.2 nH inductor is a Coilcraft 0603CS series. Figure 4: 2110 - 2170 MHz Application Circuit (50 Ω Terminations) ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003 5 ADR3410 NOTES 6 ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003 ADR3410 NOTES ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003 7 ADR3410 ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8 ADVANCED PRODUCT INFORMATION - Rev 0.1 04/2003