PD030 30μm InGaAs Photodiode FEATURES • Planar Structure • Very High Speed • Low Dark Current • Dielectric Passivation • 100% Purge Burn-in PD030-003-0xx Ceramic Sub-Mount APPLICATIONS • 10Gb/s Optical Receivers • Test and Measurement PD030-003-1xx TO can Package PRODUCT DESCRIPTION The PD030 is an InGaAs photodiode with a photosensitive region 30μm in diameter. It is intended for use in very high speed, low noise communication systems (up to 10Gb/s data rates) and for use in optical test and measurement equipment. Planar semiconductor design and dielectric passivation provide low noise performance. Reliability is assured by hermetic sealing and 100% purge burn-in (200°C, 15 hours, Vr = 20V). The device can be assembled on a ceramic submount or in a TO can. It can be pigtailed with SC, FC, or ST connectors (UPC or APC). It can also be mounted in an SC, ST of FC receptacle. Custom packages are an option. ELECTRICAL CHARACTERISTICS Table 1: Electrical Specifications PARAMETER Dark Current (ID) Capacitance (Ceramic sub-mount) (1) Capacitance (TO can) (1) Responsivity at 1310nm (Ceramic sub-mount) Responsivity at 1550nm (Ceramic sub-mount) Responsivity at 1310nm (TO can) Responsivity at 1550nm (TO can) 3dB bandwidth (50Ω) (Ceramic sub-mount) (1) 3dB bandwidth (50Ω) (TO can) (1) Operating voltage (1) 5V bias voltage MIN 0.80 0.85 0.80 0.85 9000 5800 - TYP 0.1 0.27 0.4 0.90 0.95 0.85 0.90 11000 7200 5 MAX 1.0 0.32 0.5 20 UNIT nA pF pF A/W A/W A/W A/W MHz MHz V PD030 Table 2: Absolute Maximum Ratings PARAMETER Forward Current Reverse Current Reverse Voltage Optical input power Operating Case Temperature Storage Temperature Soldering temperature (10 seconds) MIN -40 -40 - MAX 2 100 30 5 +85 +85 +250 UNIT mA μA V mW ºC ºC ºC Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. ORDERING INFORMATION Part Number PD030-003-0xx PD030-003-1xx Options Custom defined size and electrical layout Package: TO46, TO56, Impedance controlled TO46 Number of pins: 2, 3 Cap: Window, lens, sapphire. AR / Non-AR coated. Cap plating: Gold or nickel Please contact Anadigics for the specific part number and pinout that suits your needs ANADIGICS, Inc. 829 Flynn Road Camarillo, California 93012, U.S.A. Tel: +1 (805) 445-4500 Fax: +1 (805) 445-4502 URL: http://www.anadigics.com E-mail: [email protected] Rev 1.0 IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 2