High Power 3 dB, 90° Applications • Microstrip Circuits • Power Amps Caseless Components Model 1Z0261-3 Hybrid Couplers • Divider/Combiners • Switch Networks • Balanced Detectors • Antenna Feeds Features Electrical Specifications • Welded Tab Mount Frequency Isolation Insert. Loss VSWR • 2-Way Power Split MHz dB Min/Typ dB Max Max : 1 88 - 108 23 0.25 1.15 Amp. Bal. Phase Bal. Power dB Max Degrees Max Ave. CW Watts ±0.30 ±2.0 980 • Reliable Performance • Handles 980 Watts Outline Drawing Notes: Impedance: 50 ohms nominal. Meets MIL-E-5400 Class 3 requirements. Additional screening available for military and space applications. Electrical specifications apply only properly designed test fixtures. Testing is done at ambient temperature only. Sample testing is performed to MIL-Std-105, Level ii, AQL 1.0. Test includes coupling, amplitude balance, insertion loss and isolation. If your application requires additional testing, consult Anaren Power rating applies when solder tab/coupler interface has been conformally coated. Electrical and Mechanical Specifications subject to change without notice. NOTES: 1 Marking: Marking shall be in accordance with MIL-STD-130 2 Finish: Chemical conversion coat (clear) per MIL-C-5541, class 1A 3 Solder tab info: 3.1 Material: Flat wire, copper-061, per AST-B-272 3.2 Finish: Gold plate per MIL-G-45204, Type 3, Grade A, Class 00, over nickel sulfamate flash per QQ-N-290. Class 1. 4 Weight: 2.3 oz. Max 5 Dimensions: Inches and (millimeters) Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 4.2.3