ROHS Compliant Model A50A50X4 Chip Termination 50 Watts, 50Ω Description The A50A50X4 is high performance Alumina (Al2O3) chip termination intended as a low cost alternative to Beryllium Oxide (BeO) and Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! General Specifications Features: • RoHS Compliant • 50 Watts • DC – 4.0GHz • Al2O3 Ceramic • Non-Nichrome Resistive Element Resistive Element Substrate Terminal Finish Operating Temperature Al2O3 Ceramic Matte Tin over Nickel Barrier -55 to +150°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications • Low VSWR Resistance Value: Power: Frequency Range: • 100% Tested Return Loss • Small Size Thick film 50 Ohms ± 2% 50 Watts DC – 3.5GHz >26 dB DC - 2.7 GHz >20 dB DC - 3.5 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing A50A50X4 (097) rev.F pg. 1 of 2 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model A50A50X4 Typical Performance: Power De-rating: Tape & Reel: Mounting Footprint and Procedure: USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. A50A50X4 (097) rev.F pg. 2 of 2