LPD10 SERIES Single, dual and triple output • • • • • • 4:1 wide input voltage range 16 models available including 3.3V outputs Input reflected ripple according to CEPT Continuous short circuit protection EN55022 conducted emissions level B Designed to meet EN60950 and IEC950 The LPD10 series of DC/DC converters offer 10 Watts output power in a 2 x 2 inch package. 3.3V single outputs are available along with standard single, dual and triple outputs. All models feature short circuit protection as standard. The dual and triple output models of the LPD series provide undervoltage lockout. The LPD10 series complies with the rigorous EN55022 level B conducted emissions. The optimized thermal design and the copper case allow operation in ambient temperatures up to +70°C without derating or an additional heatsink. [ 2 YEAR WARRANTY ] SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Line regulation LL to HL, singles and duals LL to HL, triple output ±0.1% ±1.0% Conducted noise Radiated noise Load regulation Singles and duals: 10% to 100% FL Triples: 10% to 100% FL ±0.1% GENERAL SPECIFICATIONS ±3.0% Efficiency Cross regulation (See Note 1) Duals: asymmetrical load 10% to 100% FL Triples: asymmetrical load 10% to 100% FL Input/output 500VDC 5.0% max. Isolation resistance Input/output 108Ω Isolation capacitance Input/output 1nF Switching frequency Fixed Approvals and standards (pending) Safety Minimum load 3.3V, 5V 50mA max. Single 12V, 15V 20mA max. Duals & triples, each output 10% FL Overshoot At start-up Ripple and noise 20MHz bandwidth ±2.0% ±3.0% 3.0% max. 1.0% pk-pk, max. 20mV rms ±0.02%/°C Hiccup mode Continuous automatic recovery INPUT SPECIFICATIONS Input voltage range Input current Undervoltage lockout Start-up time 24VDC nominal, FL 48VDC nominal, FL 200ms VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Black coated, metal case Material flammability UL94V-0 Weight MTBF 65g (2.29oz) MIL-HDBK-217F 300,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -10°C to +70°C (See derating curve) Non-operating amb. -25°C to +95°C Case +95°C max. Derating See derating curve Cooling Free air convection cooled Relative humidity Non-condensing Altitude Operating Non operating 10,000 feet max. 40,000 feet max. Vibration 5Hz to 500Hz 2.5G rms (approx.) See table Dual and triple outputs 24V nominal 9.5VDC max. 48V nominal 18.5VDC max. 180 to 220kHz Case material 10 to 36VDC 20 to 72VDC Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. PAGE 108 See table Isolation voltage Singles Duals Short circuit protection (See Note 2) Level B Level B 4.0% max. Voltage accuracy Temperature coefficient EN55022, FCC part 15 EN55022, FCC part 15 30% to 95% DC/DC CONVERTERS | 10W DC/DC 10 Watt Wide input DC/DC converters INPUT OUTPUT OUTPUT INPUT TYPICAL REGULATION (TYP.) VOLTAGE VOLTAGE CURRENT CURRENT EFFICIENCY LINE LOAD 10-36VDC 3.3V 2000mA 381mA 72% ±0.1% ±0.2% LPD10-24S3V3-C 10-36VDC 5.0V 2000mA 540mA 77% ±0.1% ±0.1% LPD10-24S05-C 10-36VDC 12V 800mA 512mA 78% ±0.1% ±0.1% LPD10-24S12-C 10-36VDC 15V 660mA 512mA 78% ±0.1% ±0.1% LPD10-24S15-C 10-36VDC ±12V ±400mA 512mA 78% ±0.1% ±0.1% LPD10-24D12-C 10-36VDC ±15V ±300mA 512mA 78% ±0.1% ±0.1% LPD10-24D15-C 10-36VDC 5V/±12V 1000mA/±200mA 510mA 80% ±1.0% ±3.0% LPD10-24T05-12 10-36VDC 5V/±15V 1000mA/±160mA 510mA 80% ±1.0% ±3.0% LPD10-24T05-15 20-72VDC 3.3V 2000mA 190mA 72% ±0.1% ±0.1% LPD10-48S3V3-C 20-72VDC 5.0V 2000mA 267mA 78% ±0.1% ±0.1% LPD10-48S05-C 20-72VDC 12V 800mA 253mA 79% ±0.1% ±0.1% LPD10-48S12-C 20-72VDC 15V 660mA 253mA 79% ±0.1% ±0.1% LPD10-48S15-C 20-72VDC ±12V ±400mA 253mA 79% ±0.1% ±0.1% LPD10-48D12-C 20-72VDC ±15V ±300mA 253mA 79% ±0.1% ±0.1% LPD10-48D15-C 20-72VDC 5V/±12V 1000mA/±200mA 255mA 80% ±1.0% ±3.0% LPD10-48T05-12 20-72VDC 5V/±15V 1000mA/±160mA 255mA 80% ±1.0% ±3.0% LPD10-48T05-15 MODEL NUMBER Notes 2 Cross regulation: Duals: output 1, full load, 4.0%; output 2, minimum load, 4.0%. Triples: output 1, full load, 2.0%; output 2 vs. output 3, 2.0%; Triples: outputs 2 and 3 vs. output 1, 5.0%. All 3V3 outputs, 1 minute max. 5 DERATING CURVE Output Power (Watts) 70°C 10W Output Power (Watts) 1 95°C 0W -10°C 0°C 20°C 40°C 60°C 80°C 100°C Ambient Temperature (°C) Pinout (Triple) Pinout (Single, Dual) 0.24 (6.00) 0.24 (6.00) 2.00 (50.80) 0.42 (10.70) 0.90 (22.85) 0.50 (12.70) 2.0 (50.80) 0.10 (2.54) 0.90 (22.85) 0.90 (22.85) 0.20 (5.10) 0.90 (22.85) 0.20 (5.10) - Input Ø 0.04 Dia. (1.00) 2.00 (50.80) + Input Ø 0.04 Dia. (1.00) 0.60 (15.25) + BOTTOM VIEW 2.00 (50.80) 0.80 (20.30) 1.80 (45.72) BOTTOM VIEW - 0.60 (15.25) COM/N.C. + Output - Output 0.60 (15.25) 0.80 (20.30) 0.60 (15.25) 0.10 (2.54) 0.39 (10.10) 0.40 (10.20) 0.40 (10.20) + 0.40 (10.20) 0.39 (10.10) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions PAGE 109 DS_LPD10_20000101.PDF ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions http://www.artesyn.com COM 5V