PTH12010 12 Vin single output DC-DC CONVERTERS POLA Non-isolated 1 NEW Product • 12 A output current • 12 V input voltage • Wide-output voltage adjust • 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ • Auto-track™ sequencing* • Margin up/down controls • Efficiencies up to 94% • Output ON/OFF inhibit • Output voltage sense • Point-of-Load-Alliance (POLA) compatible • Available RoHS compliant The PTH12010 is a next generation series of non-isolated dc-dc converters offering some of the most advanced POL features available in the industry. The primary new feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled power-up and power-down. Other industry leading features include margin up/down controls and efficiencies up to 94%. The PTH12010 has an input voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc output voltage range with up to 12 A output current, which allows for maximum design flexibility and a pathway for future upgrades. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF, Cout = 0 µF OUTPUT SPECIFICATIONS Voltage adjustability (See Note 4) SPECIFICATIONS EMC CHARACTERISTICS Suffix ‘-W’ Suffix ‘-L’ Setpoint accuracy 1.2-5.5 Vdc 0.8-1.8 Vdc ±2.0% Vo Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 Line regulation ±10 mV typ. GENERAL SPECIFICATIONS Load regulation ±12 mV typ. Efficiency Total regulation ±3.0% Vo Minimum load Ripple and noise 20 MHz bandwidth 0A Suffix ‘-W’ Suffix ‘-L’ Temperature co-efficient -40 ºC to +85 ºC 25 mV pk-pk 25 mV pk-pk ±0.5% Vo Transient response (See Note 5) 70 µs recovery time Overshoot/undershoot 100 mV Margin adjustment ±5.0% Vo INPUT SPECIFICATIONS Input voltage range (See Note 3) Input current No load Remote ON/OFF (See Note 1) 10 mA typ. Positive logic Start-up time 1 V/ms Undervoltage lockout Track input voltage Insulation voltage Switching frequency Non-isolated Suffix ‘-W’ Suffix ‘-L’ 300 kHz to 400 kHz 200 kHz to 300 kHz Approvals and standards EN60950 UL/cUL60950 Material flammability Dimensions UL94V-0 (L x W x H) 34.80 x 15.75 x 9.00 mm 1.370 x 0.620 x 0.354 in Weight MTBF 10.8-13.2 Vdc See Tables on page 2 5 g (0.18 oz) Telcordia SR-332 7,092,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) MSL (‘Z’ suffix only) Operating ambient, temperature Non-operating JEDEC J-STD-020C -40 ºC to +85 ºC -40 ºC to +125 ºC Level 3 9.0-9.5 V typ. Pin 8 (See Note 6) ±0.3 Vin PROTECTION Short-circuit Auto reset 20 A typ. International Safety Standard Approvals UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044 CB Report and Certificate to IEC60950, Certificate No. US/8292/UL *Auto-track™ is a trade mark of Texas Instruments File Name: pth12010.pdf Rev (07): 19 Dec 2005 PTH12010 12 Vin single output DC-DC CONVERTERS POLA Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER INPUT VOLTAGE OUTPUT VOLTAGE 66 W 10.8-13.2 Vdc 66 W 10.8-13.2 Vdc (MAX.) OUTPUT CURRENT OUTPUT CURRENT NEW Product REGULATION EFFICIENCY (MAX.) LINE LOAD MODEL NUMBER (8,9) (MIN.) (MAX.) 0.8-1.8 Vdc 0A 12 A 89% ±10 mV ±12 mV PTH12010L 1.2-5.5 Vdc 0A 12 A 94% ±10 mV ±12 mV PTH12010W Part Number System with Options PTH12010WAST Product Family Point of Load Alliance Compatible Packaging Options No Suffix = Trays T = Tape and Reel (7) Mounting Optionl (8) D = Horizontal Through-Hole (Matte Sn) H = Horizontal Through-Hole (Sn/Pb) S = Surface-Mount (63/37 Sn/Pb pin solder material) Z = Surface-Mount (96.5/3.0/0.5 Sn/Ag/Cu pin solder material) Input Voltage 12 = 12 V Output Current 01 = 12 A Pin Option A = Through-Hole Std. Pin Length (0.140”) A = Surface-Mount Tin/Lead Solder Ball Mechanical Package Always 0 Output Voltage Code W = Wide, L = Low Voltage Output Voltage Adjustment of the PTH12010 Series The ultra-wide output voltage trim range offers major advantages to users who select the PTH12010. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 1.2 V to 5.5 V for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’. When the PTH12010 converter leaves the factory the output has been adjusted to the default voltage of 1.2 V for the PTH12010W and 0.8 V for PTH12010L. EFFICIENCY TABLE - PTH12010W (IO = 8 A) OUTPUT VOLTAGE EFFICIENCY Vo = 5.0 V 94% Vo = 3.3 V 93% Vo = 2.5 V 91% Vo = 2.0 V 90% Vo = 1.8 V 89% Vo = 1.5 V 88% Vo = 1.2 V 86% EFFICIENCY TABLE - PTH12010L (IO = 8 A) OUTPUT VOLTAGE EFFICIENCY Vo = 1.8 V 89% Vo = 1.5 V 88% Vo = 1.2 V 86% Vo = 1.0 V 84% Vo = 0.8 V 82% Notes 1 2 3 4 5 6 7 8 9 Remote ON/OFF. Positive Logic ON: Pin 3 open; or V > Vin - 0.5 V OFF: Pin 3 GND; or V < 0.8 V (min - 0.2 V). See Figures 1, 2 and 3 for safe operating curves for the PTH12010W and Figures 6 and 7 for PTH12010L. A 560 µF electrolytic input capacitor is required for proper operation. The capacitor must be rated for a minimum of 800 mA rms of ripple current. An external output capacitor is not required for basic operation. Adding 330 µF of distributed capacitance at the load will improve the transient response. 1 A/µs load step, 50 to 100% Iomax, Cout = 330 µF. If utilized Vout will track applied voltage by ±0.3 V (up to Vo set point). Tape and reel packaging only available on the surface-mount versions. To order Pb-free (RoHS compatible) surface-mount parts replace the mounting option ‘S’ with ‘Z’, e.g. PTH12010WAZ. To order Pb-free (RoHS compatible) through-hole parts replace the mounting option ‘H’ with ‘D’, e.g. PTH12010WAD. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: pth12010.pdf Rev (07): 19 Dec 2005 PTH12010 12 Vin single output DC-DC CONVERTERS POLA Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product 90 90 80 80 TEMPERATURE (ºC) TEMPERATURE (ºC) PTH12010W Characteristic Data 70 60 Nat conv 100 LFM 200 LFM 400 LFM 50 40 30 70 60 Nat conv 100 LFM 200 LFM 400 LFM 50 40 30 20 20 0 2 4 6 8 10 12 0 2 OUTPUT CURRENT (A) 4 6 8 10 12 OUTPUT CURRENT (A) Figure 2 - Safe Operating Area Vin = 12 V, Output Voltage = 3.3 V (See Note A) Figure 1 - Safe Operating Area Vin = 12 V, Output Voltage = 5 V (See Note A) 100 80 90 70 60 EFFICIENCY (%) TEMPERATURE (ºC) 90 Nat conv 100 LFM 200 LFM 400 LFM 50 40 30 Vout 5.0V 3.3V 2.5V 2.0V 1.8V 80 70 1.5V 60 1.2V 50 40 20 0 2 4 6 8 10 0 12 2 4 6 8 10 12 OUTPUT CURRENT (A) OUTPUT CURRENT (A) Figure 3 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) Figure 4 - Efficiency vs Load Current Vin = 12 V (See Note B) Notes Track Margin Down Margin Up 10 9 A SOA curves represent the conditions at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. 8 1 7 PTH12010 (Top View) Vin Vout 6 2 3 Inhibit + Cin 560µF (Required) 4 5 Vo Sense RSET 1%, 0.1W (Required) + Cout 330µF (Optional) L O A D GND GND Figure 5 - Standard Application File Name: pth12010.pdf Rev (07): 19 Dec 2005 PTH12010 12 Vin single output DC-DC CONVERTERS POLA Non-isolated 4 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product PTH12010L Characteristic Data 100 80 90 70 60 EFFICIENCY (%) TEMPERATURE (ºC) 90 100 LFM Nat conv 50 40 30 20 Vout 1.8V 1.5V 1.2V 1.0V 0.8V 80 70 60 50 0 2 4 6 8 0 10 OUTPUT CURRENT (A) 2 4 6 8 10 12 OUTPUT CURRENT (A) Figure 7 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 6 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) Notes Track Margin Down Margin Up 10 9 A SOA curves represent the conditions at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. 8 1 7 PTH12010 (Top View) Vin Vout 6 2 3 Inhibit + Cin 560µF (Required) 4 5 Vo Sense RSET 1%, 0.1W (Required) + Cout 330µF (Optional) L O A D GND GND Figure 8 - Standard Application File Name: pth12010wl.pdf Rev (06): 07 Feb 2005 PTH12010 12 Vin single output DC-DC CONVERTERS POLA Non-isolated 5 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 1.370 (34.80) 0.060 (1.52) 0.125 (3.18) 0.125 (3.18) 0.375 (9.52) 1 0.140 (3.55) 0.060 (1.52) 0.625 (15.88) 8 9 10 ø0.040 (1.02) 5 Places 7 0.070 (1.78) (Standoff Shoulder) 0.620 0.500 (15.75) (12.70) 2 Lowest Component 0.010 min. (0.25) Bottom side Clearance 6 5 4 3 NEW Product PIN CONNECTIONS PIN NO. FUNCTION 1 Ground 2 Vin TOP VIEW Host Board Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 3 Inhibit* 0.354 (9.00) MAX. 4 Vo adjust SIDE VIEW 5 Vo sense 6 Vout 7 Ground 8 Track 9 Margin down* 10 Margin up* Figure 9 - Plated Through-Hole Mechanical Drawing 1.370 (34.80) 0.060 (1.52) 0.125 (3.18) 0.125 (3.18) 0.375 (9.52) 1 10 0.060 (1.52) 0.625 (15.88) 9 8 0.354 (9.00) max.* 7 *After solder reflow on customer board *Denotes negative logic: Open = Normal operation Ground = Function active Solder Ball ø0.040 (1.02) 10 Places 0.500 0.620 (12.70) (15.75) Lowest Component 0.010 min. (0.25) Bottom side Clearance 2 3 4 5 6 TOP VIEW SIDE VIEW Host Board Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) Figure 10 - Surface-Mount Mechanical Drawing Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note www.artesyn.com File Name: pth12010.pdf Rev (07): 19 Dec 2005