asm10 1 0 W U l t r a m i n i a t ure Medical Grade Switching Power Supplies series Universal 85-265VAC Input High Efficiency Regulated Outputs 4000V Isolation Single Outputs UL60601-1, EN60601-1 & IEC60601-1 Single Output from 3.3 to 24 VDC 2”W x 2.28”L x 0.66”H Model Number Output Voltage Output Amps (max) (pk) ASM-0100 ASM-0101 ASM-0102 ASM-0103 ASM-0105 3.3 VDC 5 VDC 12 VDC 15VDC 24VDC 2.5A 2A 0.85A 0.67A 0.42A 3.3A 2.6A 1.2A 0.9A 0.6A Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 asm10 1 0 W U l t r a m i n i a t ure Medical Grade Switching Power Supplies INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: series PHYSICAL SPECIFICATIONS 85-265 VAC 47-63 Hz 20A @ 100VAC Input * 40A @ 200VAC Input * Size Construction Weight Connectors: Molex P/N: 2” x 2.28” x 0.66” Open Frame 1.6oz (44g) 50-37-5033 (Input) 50-37-5023 (Output) OUTPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Voltage and Current Load Regulation Line Regulation Cross Regulation (Duals) Preset Accuracy DC Voltage Adjust (typ) Temperature Coefficient Ripple/Noise Over Voltage Protection Over Temp. Protection Short Circuit Protection Hold Up Time See Selection Chart +/- 3% (20% to 100% Load) Singles +/- 0.1~1%, typ 2% 1% +/- 6% of FS (Primary) +/-0.03%/°C 100mV Pk-Pk, typ Clamp, 130-150% * Latching, Cool and Repower Continuous, self-recovering 20 mS, typ Oper. Temperature Storage Temperature Relative Humidity EMC MTBF 0 to +50°C(FL) -25 to +71°C * 0 to + 95%, non-cond * FCC/A, VDE 0871/A 180,000 Hrs Mil Std 217, 25°C OUTPUT DERATING CURVE 100 90 80 GENERAL SPECIFICATIONS Isolation Efficiency Switching Frequency Safety I/P-O/P: 4000VAC I/P-Ground: 2500VAC O/P-Ground: 1000VAC 75%~78%, typ 100Khz, (fixed, typical) UL60601-1, EN60601-1, IEC60601-1 Load (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 Ambient Temperature DegC All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 asm10 1 0 W U l t r a m i n i a t ure Medical Grade Switching Power Supplies series MECHANICAL DIMENSIONS 0.1 0.12” Dia. Mtg Holes (4 plcs) 2.0 10 Watt 0.68 0.1 2.28 J1 (AC Input) Pin 1 Pin 3 AC Neutral AC Line NOTE: For Class II operation (no earth Gnd), insulating type hardware must be used at this mounting hole J2 (DC Output) Pin 1 Pin 3 +Vout Return WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181