S79xxPIC Semiconductor Fixed-Negative-Voltage Regulator Descriptions This series of fixed-negative-voltage monolithic integrated-circuit voltage regulators is designed to complement series S7800 in a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single point regulation. Each of these regulators can deliver up to 1.0 amperes of output current. The internal current limiting and thermal shutdown features of these regulators make them essentially immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and current and also as the power pass element in precision regulators. Features • Output Current of 1A • Thermal Shutdown Protection • Short-Circuit Current Limit Protection • No External Components • Output Transistor Safe Operating Area Protection Ordering Information Type NO. Marking Package Code S79xxPIC S79□□PI TO-220F-3SL □□: Voltage Code (05: -5V, 08: -8V, 09: -9V, 12: -12V, 15: -15V) Outline Dimensions unit: mm Φ3.05~3.35 2.00 Typ. 9.10~9.30 12.20~12.60 6.37~6.97 1.07 Min. 0.90 Max. 2.54 Typ. 0.60 Max. 4.70 Max. 2.54 Typ. 2.70 Max. 15.40~15.80 9.80~10.20 KSD-I0T003-001 PIN Connections 1. GND 2. Input 3. Output 1 S79xxPIC Absolute Maximum Ratings Ta=25°C Characteristic Symbol Ratings Unit Operating Input Voltage VIN -35 V Power Dissipation (Tc=25℃) PD 20.8 W Power Dissipation (without Heatsink) PD 2.0 W Topr -40 ~ 85 °C TJ 150 °C TSTG -55 ~ 150 °C Operating Temperature Range Junction Temperature Storage Temperature Range Electrical Characteristics (TJ = 0 to 125℃, Vin= -10V, Iout=500mA, unless otherwise specified.) Characteristic Output Voltage** Typ. Max. Tj =25℃ -5.20 -5.0 -4.80 IOUT=5mA ~ 1A, VIN=-20V ~ -7.0V -5.25 -5.0 -4.75 - 12.5 50 - 4 15 - 15 100 - 5 50 - 1.5 2.0 VIN = -25V ~ -7.0V - 0.15 0.5 IOUT = 5mA ~ 1A - 0.08 0.5 - 125 - uVrms 54 60 - dB - 2.0 - V - -0.4 - mV/°C - 2.1 - A VIN=-25V ~ -7.0V ÌVOUT VIN=-12V ~ -8.0V IOUT=5mA ~ 1.0A Load Regulation ÌVOUT Bias Current IOUT=250mA ~ 750mA ÌIB Tj =25℃ Tj =25℃ Tj =25℃ IB Bias Current Change Output Noise Voltage VN f=10Hz ~ 100KHz Ripple Rejection Ratio RR f=120Hz, VIN =-18V ~ -8.0V Dropout Voltage VD IOUT=1A Temperature Coefficient Output Voltage Drift Peak Output Current of TCVO Unit Min. VOUT Line Regulation S7905PIC Test Condition* Symbol Tj =25℃ Tj =25℃ IOUT=5mA Tj =25℃ IPK V mV mV mA mA ＊Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0T003-001 2 S79xxPIC Electrical Characteristics (TJ = 0 to 125℃, Vin= -14V, Iout=500mA, unless otherwise specified.) Characteristic Output Voltage** Line Regulation Load Regulation Bias Current Bias Current Change Typ. Max. Tj =25℃ -8.30 -8.0 -7.70 IOUT=5mA ~ 1A, VIN=-23V ~ -10.5V -8.40 -8.0 -7.60 - 12.5 160 - 4 80 - 15 160 - 5 80 - 1.5 2.0 VIN = -25V ~ -10.5V - 0.15 1.0 IOUT = 5mA ~ 1A - 0.08 0.5 - 200 - uVrms 54 60 - dB VIN=-25V ~ -10.5V VIN=-17V ~ -11V IOUT=5mA ~ 1.0A ÌVOUT IOUT=250mA ~ 750mA Tj =25℃ Tj =25℃ Tj =25℃ IB ÌIB Unit Min. VOUT ÌVOUT S7908PIC Test Condition* Symbol V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz Ripple Rejection Ratio RR f=120Hz, VIN =-21.5V ~ -11.5V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -0.6 - mV/°C Tj =25℃ - 2.1 - A Temperature Coefficient of Output Voltage Drift Peak Output Current TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0T003-001 3 S79xxPIC Electrical Characteristics (TJ = 0 to 125℃, Vin= -15V, Iout=500mA, unless otherwise specified.) Characteristic Output Voltage** Line Regulation Load Regulation Bias Current Bias Current Change Typ. Max. Tj =25℃ -9.30 -9.0 -8.70 IOUT=5mA ~ 1A, VIN=-23V ~ -11.5V -9.40 -9.0 -8.60 - 10 180 - 5 90 - 12 180 - 4 90 - 3 6 VIN = -25V ~ -11.5V - 0.1 1.0 IOUT = 5mA ~ 1A - 0.08 0.5 - 175 - uVrms 54 60 - dB VIN=-25V ~ -10.5V VIN=-17V ~ -11V IOUT=5mA ~ 1.0A ÌVOUT IOUT=250mA ~ 750mA Tj =25℃ Tj =25℃ Tj =25℃ IB ÌIB Unit Min. VOUT ÌVOUT S7909PIC Test Condition* Symbol V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz Ripple Rejection Ratio RR f=120Hz, VIN =-21.5V ~ -11.5V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -0.4 - mV/°C Tj =25℃ - 2.1 - A Temperature Coefficient of Output Voltage Drift Peak Output Current TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0T003-001 4 S79xxPIC Electrical Characteristics (TJ = 0 to 125℃, Vin= -19V, Iout=500mA, unless otherwise specified.) Characteristic Output Voltage** Line Regulation Load Regulation Bias Current Bias Current Change Typ. Max. Tj =25℃ -12.5 -12.0 -11.5 IOUT=5mA ~ 1A, VIN=-27V ~ -14.5V -12.6 -12.0 -11.4 - 5 80 - 3 30 - 15 200 - 5 75 - 2.0 3.0 VIN = -30V ~ -14.5V - 0.04 0.5 IOUT = 5mA ~ 1A - 0.08 0.5 - 300 - uVrms 54 60 - dB VIN=-30V ~ -14.5V VIN=-22V ~ -16V IOUT=5mA ~ 1.0A ÌVOUT IOUT=250mA ~ 750mA Tj =25℃ Tj =25℃ Tj =25℃ IB ÌIB Unit Min. VOUT ÌVOUT S7912PIC Test Condition* Symbol V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz, Ripple Rejection Ratio RR f=120Hz, VIN =-25V ~ -15V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -0.8 - mV/°C Tj =25℃ - 2.1 - A Temperature Coefficient of Output Voltage Drift Peak Output Current TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0T003-001 5 S79xxPIC Electrical Characteristics (TJ = 0 to 125℃, Vin= -23V, Iout=500mA, unless otherwise specified.) Characteristic Output Voltage** Line Regulation Load Regulation Bias Current Bias Current Change Typ. Max. Tj =25℃ -15.6 -15.0 -14.4 IOUT=5mA ~ 1A, VIN=-30V ~ -17.5V -15.75 -15.0 -14.25 - 5 100 - 3 50 - 15 200 - 5 75 - 2.0 3.0 VIN = -30V ~ -17.5V - 0.04 0.5 IOUT = 5mA ~ 1A - 0.08 0.5 - 375 - uVrms 54 60 - dB VIN=-30V ~ -17.5V VIN=-26V ~ -20V IOUT=5mA ~ 1.0A ÌVOUT IOUT=250mA ~ 750mA Tj =25℃ Tj =25℃ Tj =25℃ IB ÌIB Unit Min. VOUT ÌVOUT S7915PIC Test Condition* Symbol V mV mV mA mA Output Noise Voltage VN f=10Hz ~ 100KHz, Ripple Rejection Ratio RR f=120Hz, VIN =-28.5V ~ -18.5V Dropout Voltage VD IOUT=1A Tj =25℃ - 2.0 - V IOUT=5mA Tj =25℃ - -1.0 - mV/°C Tj =25℃ - 2.1 - A Temperature Coefficient of Output Voltage Drift Peak Output Current TCVO IPK Tj =25℃ ＊ Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. ■Test circuit KSD-I0T003-001 6 S79xxPIC Electrical Characteristic Curves Fig. 1 VOUT - VIN Fig. 2 VDROP - Ta Fig. 3 IB - Tj Fig. 4 VOUT - Tj Fig. 5 ISC - VIN KSD-I0T003-001 7 S79xxPIC The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-I0T003-001 8