SB3318E-G / SB3318E-G(B) Semiconductor High Brightness LED Lamp Features • Colorless transparency lens type • φ3mm(T-1) all plastic mold type • Super luminosity • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Outline Dimensions unit : mm STRAIGHT TYPE STOPPER Ø2.74~3.14 TYPE : (B) Ø2.74~3.14 3.90~4.30 2.70~3.10 3.90~4.30 2.70~3.10 1.20 Min. 0.70 Max. 23.00 Min. 1.27 Typ. 5.00~6.00 23.00 Min. 0.70 Max. 1.00 Min. 1.00 Min. 1 2 3.60~4.00 2.54 Typ. 3.50~3.90 0.45 Max. 0.45 Max. 2.54 Typ. KSD-O2C001-000 1 2 3.60~4.00 3.50~3.90 PIN Connections 1. Anode 2. Cathode 1 SB3318E-G / SB3318E-G(B) Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Rating Unit Power dissipation PD 75 mW Forward current IF 20 mA IFP 50 mA Reverse voltage VR 4 V Operating temperature range Topr -25∼85 ℃ Storage temperature range Tstg -30∼100 ℃ 1 * Peak forward current 260℃ for 10 seconds Soldering temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package ※ Recommend document -. LED is very sensitive to ESD. Electrical / Optical Characteristics Characteristic Forward Voltage 2 * Luminous Intensity *3 Dominant Wavelength Spectrum Bandwidth Reverse Current 4 * Half angle (Ta=25oC) Symbol Test Condition Min. Typ. Max. Unit VF IF= 20mA 2.9 - 3.8 V IV IF= 20mA 100 - 350 mcd λD ∆λ IR IF= 20mA 460 - 475 nm IF= 20mA - 26 - nm VR=4V - - 10 uA θ1/2 IF= 20mA - ±45 - deg *2. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *3. Dominant Wavelength Maximum tolerance for each Grade Classification limit is ±1nm *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ● VF / IV / λD Grade Classification (Ta=25℃) Test Condition @IF = 20mA Forward Voltage [V] Luminous Intensity [mcd] Dominant eavelength [nm] 1 : 2.9~3.2 L : 100~155 a : 460~465 2 : 3.2~3.5 M : 155~230 b : 465~470 3 : 3.5~3.8 N : 230~350 c : 470~475 (Do not use to combine grade classification. It must be used separately grade classification) KSD-O2C001-000 2 SB3318E-G / SB3318E-G(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Fig. 3 IF – Ta Forward Relative Intensity [%] Current IF [mA] IF=20mA Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KSD-O2C001-000 3 SB3318E-G / SB3318E-G(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2C001-000 4