SDB10150PI Semiconductor High Voltage Schottky Rectifier Applications • High speed switching and rectification • Switching mode power supply Features • Dual chip common cathode • Low forward voltage & low reverse current • Low switching loss Ordering Information Type No. Marking SDB10150PI Package Code SDB10150PI TO-220F-3L Outline Dimensions unit : mm 2.60~3.00 3.46 Typ. 9.10~9.30 Φ3.05~3.35 ● PIN Connections 1 1.07 Min. 0.90 Max. 0.60 Max. 2.54 Typ. 3 1. Anode 2. Cathode 3. Anode 2 3 0.60 Max. 2.70 Max. 2 2.54 Typ. 1 4.70 Max. 15.40~15.80 12.40~13.00 12.20~12.60 9.80~10.20 KSD-D0O004-000 1 SDB10150PI Absolute Maximum Ratings TC=25°C Characteristic Symbol Rating Unit Repetitive peak reverse voltage VRRM 150 V Average rectified output current IO 10 A Peak forward surge current (Non-repetitive 60Hz sine wave) IFSM 120 A TJ 150 °C Tstg -55 ~ 150 °C Junction temperature Storage temperature range Electrical Characteristics Characteristic TC=25°C Symbol Peak forward voltage Repetitive peak reverse current Total thermal resistance VFM 1), 2) IRRM 1) Rth Test Condition Min. Typ. Max. Unit IF=5A - - 0.88 V VR=150V - - 10 ㎂ Junction to ambient - - 62.5 Junction to case - - 4.0 °C/W 1) per each unit 2) Pulse test : tP≤380 ㎲, Duty cycle≤2% KSD-D0O004-000 2 SDB10150PI Electrical Characteristic Curves [per each unit] Fig.1 IF - VF [㎂] Fig. 2 IR - VR Fig. 4 CJ - VR Fig. 5 IFSM – Number of cycle Fig. 6 IO derating - TC p d Fig. 3 PF - IO KSD-D0O004-000 3 SDB10150PI The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D0O004-000 4