SHE123BGHE / SHE123BGHE-(B) Semiconductor High Brightness LED Lamp Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Application • Traffic Signal • Massage Board Outline Dimensions unit : mm STRAIGHT TYPE STOPPER 5.0± 0.2 TYPE 5.0± 0.2 8.6± 0.2 8.6± 0.2 0.8± 0.2 0.8± 0.2 3.5± 0.5 0.5 0.5 25.0 M IN 25.0 M IN 1.0M IN 1.0M IN 2.54N O M 2.54N O M 1 2 5.8± 0.2 1 2 5.8± 0.2 PIN Connections 1.Anode 2.Cathode KLE-4006-001 1 SHE123BGHE / SHE123BGHE-(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 120 mW Forward Current IF 40 mA IFP 65 mA Reverse Voltage VR 4 V Operating Temperature Topr -25∼85 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 2 260℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Forward Voltage 4 * Luminors Intensity Dominant Wavelength Spectrum Bandwidth 3 * Half angle Ta=25˚C Symbol Test Condition Min. Typ. Max. Unit VF IF= 20mA 2.9 - 3.6 V IV IF= 20mA 3400 - 8910 mcd λD IF= 20mA - 502 - nm Δλ IF= 20mA - 30 - nm 1 IF= 20mA - ±20 - deg θ /2 *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each Grade Classification limit is ±18% *4. Luminous Intensity classification T2 U1 U2 V1 V2 3400~3960 3960~4900 4900~5940 5940~7400 7400~8910 KLE-4006-001 2 SHE123BGHE / SHE123BGHE-(B) Characteristic Diagrams Fig. 1 IF - VF Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 2 IV - IF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Current IF [mA] Relative Intensity [%] Fig. 3 IF – Ta Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram 100 50 0 50 100 Relative Luminous Intensity [%] KLE-4006-001 3 SHE123BGHE / SHE123BGHE-(B) These AUK Corp. products are intended for usage in general electronic equipment (Office and communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these AUK products in equipm- ents which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.) AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation KLE-4006-001 4