Semiconductor SHE134BGE / SHE134BGE(B) Oval Type High Efficiency LED Lamp Features • Blue colored transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Application • Traffic Signal • Message Board Outline Dimensions unit : mm STRAIGHT TYPE STOPPER TYPE : (B) 0 0 . 5 ~ 0 6 . 4 0 0 . 5 ~ 0 6 . 4 5.40~5.80 5.40~5.80 0 8 . 8 ~ 0 4 . 8 0 8 . 8 ~ 0 4 . 8 1.20 Min. 0.55 Max. 22.00 Min. 1.27 Typ. 0.70 Max. 3.00~3.50 0.55 Max. 22.00 Min. 1.00 Min. 1.00 Min. 2.54 Typ. 0.55 Max. 0.55 Max. 2.54 Typ. (1) (2) KSD-O3C006-000 PIN Connections 1. Anode 2. Cathode 1 SHE134BGE / SHE134BGE(B) Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Ratings Unit Power dissipation PD 150 mW Forward current IF 40 mA IFP 50 mA Operating temperature range Topr -25∼85 ℃ Storage temperature range Tstg -30∼100 ℃ 1 * Peak forward current 2 * Soldering temperature Tsol 260℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package ※ Recommend document -. LED is very sensitive to ESD. Electrical / Optical Characteristics Characteristic (Ta=25oC) Symbol Test Condition Min Typ Max Unit Forward voltage VF IF= 20mA - 3.2 3.8 V * Luminous intensity IV IF= 20mA 950 - 3400 mcd λD ∆λ IF= 20mA 460 465 470 nm IF= 20mA - 20 - nm - ±30 - - ±15 - 4 Dominant wavelength Spectrum bandwidth *3Half angle X θ1/2 IF= 20mA Y deg *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% *4. Luminous Intensity Classification R1 R2 S1 S2 T1 950~1250 1250~1760 1760~2200 2200~2640 2640~3400 KSD-O3C006-000 2 SHE134BGE / SHE134BGE(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Forward Voltage VF [V] Fig. 3 IF – Ta Forward Relative Intensity [%] Current IF [mA] Fig.4 Spectrum Distribution Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5-1 Radiation Diagram(X) 100 Current IF [mA] 50 0 Fig. 5-2 Radiation Diagram(Y) 50 100 Relative Luminous Intensity Iv [%] KSD-O3C006-000 100 50 0 50 100 Relative Luminous Intensity Iv [%] 3 SHE134BGE / SHE134BGE(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O3C006-000 4