AUK SI5415-H

SI5415-H / SI5415-H(B)
Semiconductor
IRED
Features
•
•
•
•
Purple Colored transparency lens type
φ5mm(T-13/4) all plastic mold type
Low power consumption
High radiant intensity
Applications
• Infrared remote control and free air transmission systems with low forward voltage and
comfortable radiation angle requirements in combination with PIN photodiodes or phototransistors.
Outline Dimensions
unit : mm
STRAIGHT TYPE
STOPPER
4.80~5.20
4.80~5.20
8.40~8.80
1.00 Max.
0.05 Typ.
TYPE : (B)
8.40~8.80
1.00 Max.
0.05 Typ.
1.20 Min.
26.00 Min.
1.27 Typ.
0.60 Max.
2.90~3.90
0.60 Max.
26.00 Min.
1.00 Min.
1.00 Min.
2.54 Typ.
1
2
5.60~6.60
0.55 Max.
0.55 Max.
2.54 Typ.
1
2
5.60~6.60
PIN Connections
1. Anode
2. Cathode
KSD-O2S006-000
1
SI5415-H / SI5415-H(B)
Absolute Maximum Ratings
Characteristic
(Ta=25℃)
Symbol
Rating
Unit
Power dissipation
PD
145
mW
Forward current
IF
100
mA
IFP
1
A
Reverse voltage
VR
4
V
Operating temperature range
Topr
-25∼85
℃
Storage temperature range
Tstg
-30∼100
℃
1
* Peak forward current
2
* Soldering temperature
Tsol
260℃ for 10 seconds
*1.Duty ratio = 1/16, Pulse width = 0.1ms
*2.Keep the distance more than 2.0mm from PCB to the bottom of IRED package
Electrical / Optical Characteristics
Characteristic
(Ta=25℃)
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF= 50mA
-
1.3
1.45
V
Radiant intensity
IE
IF= 50mA
20
36
-
mW/Sr
Peak wavelength
λP
∆λ
IR
IF= 50mA
-
950
-
nm
IF= 50mA
-
50
-
nm
VR=4V
-
-
10
uA
θ1/2
IF= 50mA
-
±20
-
deg
Spectrum bandwidth
Reverse current
3
* Half angle
*3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
KSD-O2S006-000
2
SI5415-H / SI5415-H(B)
Characteristic Diagrams
Fig. 2 IE - IF
Forward Current IF [mA]
Luminous Intensity Iv [mcd]
Fig. 1 IF - VF
Forward Voltage VF [V]
Fig.4 Spectrum Distribution
Forward
Fig. 3 IF – Ta
Relative Intensity [%]
Current IF [mA]
Current IF [mA]
Forward
Ambient Temperature Ta [℃]
Wavelength λ [nm]
Fig. 5 Radiation Diagram
Relative Luminous Intensity Iv [%]
KSD-O2S006-000
3
SI5415-H / SI5415-H(B)
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-O2S006-000
4