STK0765P Semiconductor Advanced Power MOSFET SWITCHING REGULATOR APPLICATIONS Features • High Voltage: BVDSS=650V(Min.) • Low Crss : Crss=19pF(Typ.) • Low gate charge : Qg=49nc(Typ.) • Low RDS(on) :RDS(on)=1.2Ω(Max.) Ordering Information Type NO. Marking STK0765P Package Code STK0765 TO-220AB-3L Outline Dimensions unit : mm 9.80~10.20 Φ3.70 Max. 4.35~4.65 8.20~8.60 1.37 Max. 2.20~2.60 0.95 Max. 2.54 Typ. 5.08 Typ. 9.85~10.15 0.95~1.05 1.49~1.59 1.62 Max. 2.35~2.45 12.68~13.48 9.05~9.35 3.00° 6.30~6.70 1.20~1.40 9.85~10.15 KSD-T0P003-000 0.40~0.60 PIN Connections 1. Gate 2. Drain 3. Source 1 STK0765P Absolute maximum ratings (Tc=25°C) Characteristic Symbol Rating Unit Drain-source voltage VDSS 650 V Gate-source voltage VGSS ±30 V (Tc=25℃) 7 A (Tc=100℃) 4.4 A * IDM 28 A Drain power dissipation PD 100 W Drain current (DC) Drain current (Pulsed) ID Avalanche current (Single) ② IAS 7 A Single pulsed avalanche energy ② EAS 420 mJ Avalanche current (Repetitive) ① IAR 7 A Repetitive avalanche energy ① EAR 14.7 mJ TJ Tstg 150 -55~150 °C Junction temperature Storage temperature range * Limited by maximum junction temperature Characteristic Thermal resistance Symbol Typ. Max Junction-case Rth(J-C) - 1.25 Junction-ambient Rth(J-a) - 83.3 KSD-T0P003-000 Unit ℃/W 2 STK0765P Electrical Characteristics Characteristic (Tc=25°C) Symbol Test Condition Min. Typ. Max. Unit Drain-source breakdown voltage BVDSS ID=250µA, VGS=0 650 - - V Gate threshold voltage VGS(th) ID=250µA, VDS= VGS 2.0 - 4.0 V Drain-source cut-off current IDSS VDS=650V, VGS=0V - - 1 µA Gate leakage current IGSS VDS=0V, VGS=±30V - - ±100 nA Drain-source on-resistance ④ RDS(ON) VGS=10V, ID=3.5A - - 1.2 Ω Forward transfer conductance ④ gfs VDS=10V, ID=5.0A 3.9 6.4 - S - 881 1321 - 123 184 - 19 28 - 18 - - 19 - - 72 - - 28 - - 49 73 - 8.4 13 - 22 33 Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Total gate charge Qg Gate-source charge Qgs Gate-drain charge Qgd VGS=0V, VDS=25V f=1MHz VDD=325V, ID=7A RG=25Ω ③④ VDS=325V, VGS=10V ID=7A ③④ Source-Drain Diode Ratings and Characteristics Characteristic Symbol Source current (DC) IS Test Condition pF ns nC (Tc=25°C) Min Typ Max - - 7 - - 28 Unit Source current (Pulsed) ① ISM Integral reverse diode in the MOSFET Forward voltage ④ VSD VGS=0V, IS=7A - - 1.4 V Is=7A, VGS=0, diS/dt=100A/ us - 320 - ns - 2.4 - uC Reverse recovery time trr Reverse recovery charge Qrr A Note ; ① Repetitive Rating : Pulse Width Limited by Maximum Junction Temperature ② L=15.7mH, IAS=7A, VDD=50V, RG=27Ω ③ Pulse Test : Pulse Width＜ 300us, Duty cycle≤ 2% ④ Essentially independent of operating temperature KSD-T0P003-000 3 STK0765P Electrical Characteristic Curves Fig. 2 ID - VGS Fig. 1 ID - VDS : - Fig. 3 RDS(on) - ID Fig. 4 IS - VSD Fig. 5 Capacitance - VDS Fig. 6 VGS - QG KSD-T0P003-000 4 STK0765P Fig. 8 RDS(on) - TJ Fig. 7 VDSS - TJ C C Fig. 9 Fig. 10 Safe Operating Area ID - TC * KSD-T0P003-000 5 STK0765P Fig. 11 Gate Charge Test Circuit & Waveform Fig. 12 Resistive Switching Test Circuit & Waveform Fig. 13 EAS Test Circuit & Waveform KSD-T0P003-000 6 STK0765P Fig. 14 Diode Reverse Recovery Time Test Circuit & Waveform KSD-T0P003-000 7 STK0765P The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0P003-000 8