AVAGO HDSP-S53E

HDSP-S5xE/S5xG/B5xZ Series
91.44 mm (3.6 inch) General Purpose 5 x 7 Dot Matrix
Alphanumeric Displays
Data Sheet
Description
These displays have a 91.44 mm (3.6 inch) character
height. The devices are available in either common
row anode or common row cathode configurations.
The displays come in only black face paint and are
available in a choice of GaP Red or GaP Green colors.
The Bi-color display consists of GaP Red and GaP
Green colors.
These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for
functional and visual/cosmetic defects.
Applications
• Suitable for indoor use
• Not recommended for industrial applications, i.e. operating temperature requirements exceeding 85°C or
below –35°C
• Extreme temperature cycling not recommended[1]
Features
• 5 x 7 Dot matrix font
• Stackable horizontally
• Pin-out
– 76.2 mm (3.0 in.) Dual-In-Line (DIP) leads on 5.08 mm
(0.2 in.) centers
• Choice of colors
– Single color: red or green
– Bi-color: red and green
• Face paint color: black
• Design flexibility
– Common row anode or Common row cathode
• Categorized:
– Single color: luminous intensity
– Bi-Color: luminance
• Green categorized for color
Devices
GaP Red GaP Green
HDSPHDSPS53E
S53G
S58E
S58G
B53Z
B58Z
Description
91.44 mm Black Surface Common Row Anode
91.44 mm Black Surface Common Row Cathode
91.44 mm Black Surface Bi-Color Common Row Anode
91.44 mm Black Surface Bi-Color Common Row Cathode
Note:
1. For details, please contact your local Avago components sales office or an authorized distributor.
Package Dimensions
Single Color
76.00
(2.992)
60.96
(2.400)
COL 1
2
ROW
1
2
3
106.55
(4.195)
91.44
(3.600)
76.20
(3.000)
4
5
6
7
∅10.16 (0.40)
PIN 1
PART NO.
13.00 (0.512)
4.80 ± 0.50
(0.189)
5.08
(0.200)
0.80
(0.031)
76.20
(3.000)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm.
2
3
4
5
Internal Circuit Diagram
Common Row Anode – Single Color
COLUMN
PIN
2
3
3
4
11
4
5
10
6
PIN NO.
CONNECTION
9
1
2
3
ANODE ROW 5
ANODE ROW 7
CATHODE COLUMN 2
2 14
4
5
6
7
8
CATHODE COLUMN 3
ANODE ROW 4
CATHODE COLUMN 5
ANODE ROW 6
ANODE ROW 3
ROW
1
3
1
13
3
8
4
5
5
1
6
7
7
2
12
9
ANODE ROW 1
10
11
12
CATHODE COLUMN 4
CATHODE COLUMN 3
ANODE ROW 4
13
14
CATHODE COLUMN 1
ANODE ROW 2
Internal Circuit Diagram
Common Row Cathode – Single Color
COLUMN
PIN
9
2 14
4
2
3
3
4
11
4
5
10
6
PIN NO.
ROW
1
1
13
3
8
4
5
5
1
6
7
7
2
12
CONNECTION
1
CATHODE ROW 5
2
CATHODE ROW 7
3
ANODE COLUMN 2
4
5
6
7
8
9
10
11
12
13
14
ANODE COLUMN 3
CATHODE ROW 4
ANODE COLUMN 5
CATHODE ROW 6
CATHODE ROW 3
CATHODE ROW 1
ANODE COLUMN 4
ANODE COLUMN 3
CATHODE ROW 4
ANODE COLUMN 1
CATHODE ROW 2
Package Dimensions
Bi-Color
76.00
(2.992)
60.96
(2.400)
COL 1
2
ROW
1
2
3
106.55
(4.195)
91.44
(3.600)
76.20
(3.000)
4
5
6
7
∅10.16 (0.40)
PART NO.
13.00 (0.512)
4.80 (0.189)
5.08
(0.200)
0.80
(0.031)
76.20
(3.000)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm.
5
3
4
5
Internal Circuit Diagram
Common Row Anode – Bi-Color
3
1
COLUMN
1
PIN
2
2
5
6
21
22
7
8
2
ROW 7 GREEN
ROW 7 HER
COLUMN 2 GREEN
27
6
7, 21
8, 22
9
10
11, 25
12, 26
13
14
15
16
17
18
19
20
23
24
27
28
COLUMN 2 HER
COLUMN 3 GREEN
COLUMN 3 HER
ROW 5 GREEN
ROW 5 HER
ROW 4 GREEN
ROW 4 HER
ROW 6 GREEN
COLUMN 6 HER
COLUMN 5 GREEN
COLUMN 5 HER
ROW 1 GREEN
ROW 1 HER
COLUMN 4 GREEN
COLUMN 4 HER
ROW 3 GREEN
ROW 3 HER
ROW 2 GREEN
ROW 2 HER
23
25 11
9
13
14
7
3
4
6
CONNECTION
3
4
5
10
6
16
18
17
26 12
5
15
COLUMN 1 GREEN
COLUMN 1 HER
24
4
20
1
2
28
3
19
5
PIN NO.
ROW
1
4
THE SIGN
REPRESENTS HER COLOR DICE
THE SIGN
REPRESENTS GREEN COLOR DICE
Internal Circuit Diagram
Common Row Cathode – Bi-Color
3
1
COLUMN
1
PIN
2
2
5
6
21
22
7
8
2
ROW 7 GREEN
ROW 7 HER
COLUMN 2 GREEN
27
6
7, 21
8, 22
9
10
11, 25
12, 26
13
14
15
16
17
18
19
20
23
24
27
28
COLUMN 2 HER
COLUMN 3 GREEN
COLUMN 3 HER
ROW 5 GREEN
ROW 5 HER
ROW 4 GREEN
ROW 4 HER
ROW 6 GREEN
COLUMN 6 HER
COLUMN 5 GREEN
COLUMN 5 HER
ROW 1 GREEN
ROW 1 HER
COLUMN 4 GREEN
COLUMN 4 HER
ROW 3 GREEN
ROW 3 HER
ROW 2 GREEN
ROW 2 HER
23
25 11
9
13
14
7
3
4
7
CONNECTION
3
4
5
10
6
16
18
17
26 12
5
15
COLUMN 1 GREEN
COLUMN 1 HER
24
4
20
1
2
28
3
19
5
PIN NO.
ROW
1
4
THE SIGN
REPRESENTS HER COLOR DICE
THE SIGN
REPRESENTS GREEN COLOR DICE
Absolute Maximum Ratings at TA = 25˚C
Parameter
Average Power per Dot[1]
Peak Forward Current per Dot[1]
(1/8 Duty Cycle at 10 KHz)
Average Forward Current per Dot
Reverse Voltage per Dot
Operating Temperature
Storage Temperature
Wave Soldering Temperature for 3 seconds[4]
(2 mm [0.078 in.] below Body)
GaP Red
HDSP-S53E/S58E/B53Z/B58Z
130
GaP Green
HDSP-S53G/S58G/B53Z/B58Z
130
Units
mW
80
25[1,2]
3
–35 to +85
–35 to +85
100
25[1,3]
3
–35 to +85
–35 to +85
mA
mA
V
°C
°C
250
250
°C
Notes:
1. Do not exceed maximum average current per dot.
2. Derate above 25°C at 0.20 mA/°C.
3. Derate above 25°C at 0.33 mA/°C.
4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds.
8
Optical/Electrical Characteristics at TA = 25˚C
GaP Red
Devices
HDSPParameter
Luminous Intensity/Unit
(Digit Average)[1]
S53E
S58E
B53Z
B58Z
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Reverse Voltage[3]
Luminous Intensity
Matching Ratio
Symbol
Iv
λpeak
λd
VF
VR
I v-m
Min.
2.2
Typ.
4.0
632
622
4.1
Max.
7.47
5.2
3.0
Units
mcd
nm
nm
V
V
2:1
Test Conditions
IFP = 40 mA,
1/8 Duty Factor
IF = 20 mA
IF = 20 mA
IF = 20 mA
IR = 100 µA
IFP = 40 mA,
1/8 Duty Factor
GaP Green
Devices
HDSPParameter
Luminous Intensity/Unit
(Digit Average)[1]
Peak Wavelength
S53G
Dominant Wavelength[2]
S58G
B53Z
Forward Voltage
B58Z
Reverse Voltage[3]
Luminous Intensity
Matching Ratio
Symbol
Iv
λpeak
λd
VF
VR
Iv-m
Min.
3.31
Typ.
6.23
568
573
4.5
Max.
11.22
5.2
3.0
Units
mcd
nm
nm
V
V
2:1
Test Conditions
IFP = 40 mA,
1/8 Duty Factor
IF = 20 mA
IF = 20 mA
IF = 20 mA
IR = 100 µA
IFP = 40 mA,
1/8 Duty Factor
Bi-Color
Devices
HDSPParameter
Luminance/Unit
B53Z
(Digit Average)[1]
B58Z
Symbol
Iv
Min.
72.0
Typ.
130
Max.
258.0
Units
Cd/m2
Test Conditions
IFP = 40 mA,
1/8 Duty Factor
Notes:
1. The digits are categorized for luminous intensity or luminance. The intensity or luminance category is designated by a letter on the side of the package.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.
9
Intensity Bin Limits[1] (mcd at IFP = 40 mA, 1/8 Duty Factor)
GaP Red
Bin Name
G
H
Min.[2]
2.2
3.31
Max.[2]
3.3
4.97
I
4.98
7.47
Min.[2]
3.31
4.98
7.48
Max.[2]
4.97
7.47
11.22
GaP Green
Bin Name
H
I
J
Bi-Color (Cd/m2 at IFP = 40 mA, 1/8 Duty Factor)
Min.[2]
72
86
104.1
124.1
149.1
179.1
215.1
Bin Name
E
F
G
H
I
J
K
Max.[2]
86
104
124
149
179
215
258
Hue Grade
Coordinate
X
Y
4
0.542-0.553
0.445-0.456
5
0.552-0.563
0.435-0.446
6
0.562-0.573
0.425-0.436
Bin
7
0.572-0.583
0.415-0.426
8
0.582-0.593
0.405-0.416
9
0.592-0.603
0.395-0.406
Notes:
1. Hue categories are established for classification of products. Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ± 10%.
Color Bin Limits (nm)[1]
GaP Green
Bin Name
3
4
5
Min.[2]
569.1
571.1
573.1
Max.[2]
571
573
575
Notes:
1. Bin categories are established for classification of products. Products may not be available in
all bin categories.
2. Tolerance for each color bin limit is ± 1.0 nm.
10
10
0.602-0.613
0.385-0.396
IF – FORWARD CURRENT – mA
IDC – MAXIMUM DC CURRENT – mA
45
30
25
GaP RED
20
15
GaP GREEN
10
5
0
0
20
40
60
80
40
35
30
25
GaP RED
20
15
GaP
10
5
0
100
0
1
1.4
RELATIVE EFFICIENCY
1.2
1.0
GaP RED
0.8
GaP GREEN
0.6
0.4
0.2
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
IPEAK – PEAK DOT CURRENT – mA
Figure 3. Relative efficiency (luminous
intensity per dot) vs. peak current per dot.
11
3
4
5
6
Figure 2. Forward current vs. forward voltage.
RELATIVE LUMINANCE
(NORMALIZED TO 1 AT 40 mA PEAK)
Figure 1. Maximum allowable average
current per dot vs. ambient temperature.
2
VF – FORWARD VOLTAGE – V
TA – AMBIENT TEMPERATURE – °C
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0 10 20 30 40 50 60 70 80 90 100
IPEAK – PEAK FORWARD CURRENT – mA
Figure 4. Relative luminance vs. peak forward current.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride, etc.)
are not recommended for cleaning
LED parts. All of these various
solvents attack or dissolve the
encapsulating epoxies used to
form the package of plastic LED
parts.
Device Reliability
For reliability information, please
see the reliability data sheet
91.44 mm General Purpose
5 x 7 Dot Matrix Alphanumeric
Displays.
For information on soldering
LEDs, please refer to Application
Note 1027.
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved.
5988-1731EN May 18, 2006