HDSP-B58x Series 53.3 mm (2.1 inch) General Purpose 5 x 8 Dot Matrix Bi-Color Alphanumeric Displays Data Sheet Description These displays have a 53.3 mm (2.1 inch) character height. The devices are available in either common row anode or common row cathode configurations. The displays come in only black face paint. This bi-color display consists of GaP Red (HER) and GaP Green colors. These parts are subjected to Out-going Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/cosmetic defects. Devices HDSPB581 B582 Description 53.3 mm Black Surface Common Row Anode 53.3 mm Black Surface Common Row Cathode Note: 1. For details, please contact your local Avago components sales office or an authorized distributor. Features • 5 x 8 Dot matrix font • X-Y stackable • Pin-out – 45.72 mm (1.8 in.) Dual-In-Line (DIP) leads on 2.54 mm (0.1 in.) centers • Color – Bi-color: GaP Red and GaP Green • Face paint color: black • Design flexibility – Common row anode or common row cathode • Categorized for luminance Applications • Suitable for indoor use • Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85°C or below –35°C • Extreme temperature cycling not recommended[1] Package Dimensions 30.48 (1.201) 0.50 (0.019) COL 1 2 3 4 5 1 0.40 (0.016) 2 3 60.60 (2.386) 4 53.34 (2.100) 5 7.62 (0.300) 6 7 8 ∅5.0 (0.197) x 40 PIN 1 ROW 7.62 (0.300) 38.00 (1.496) PART NO. 8.8 (0.346) 46.1(1.81) ∅0.51 (0.020) 3.5 (0.138) ± 0.5 2.54 x 8 = 20.32 (0.800) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. 2 Internal Circuit Diagram HDSP-B581 1 COLUMN 1 PIN 3 2 18 2 3 ROW 1 16 2 15 3 17 4 14 5 8 6 5 7 6 8 9 PIN NO. 3 THE SIGN REPRESENTS HER CHIPS THE SIGN REPRESENTS GREEN CHIPS CONNECTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 COLUMN 1 GREEN COLUMN 2 GREEN COLUMN 2 RED COLUMN 3 RED ROW 6 ROW 7 COLUMN 4 RED ROW 5 ROW 8 COLUMN 5 GREEN COLUMN 5 RED COLUMN 4 GREEN COLUMN 3 GREEN ROW 4 15 16 ROW 2 ROW 1 17 18 ROW 3 COLUMN 1 RED 13 4 4 12 5 7 10 11 Internal Circuit Diagram HDSP-B582 1 COLUMN 1 PIN 2 18 2 3 ROW 1 16 2 15 3 17 4 14 5 8 6 5 7 6 8 9 PIN NO. 4 THE SIGN REPRESENTS HER CHIPS THE SIGN REPRESENTS GREEN CHIPS FUNCTION 1 2 3 4 5 COLUMN 1 GREEN ANODE COLUMN 2 GREEN ANODE COLUMN 2 RED ANODE COLUMN 4 RED ANODE ROW 6 CATHODE 6 7 8 9 10 ROW 7 CATHODE COLUMN 4 RED ANODE ROW 5 CATHODE ROW 8 CATHODE COLUMN 5 GREEN ANODE 11 12 COLUMN 5 RED ANODE COLUMN 4 GREEN ANODE 13 14 COLUMN 3 GREEN ANODE ROW 4 CATHODE 15 ROW 2 CATHODE 16 ROW 1 CATHODE 17 18 ROW 3 CATHODE COLUMN 1 RED ANODE 4 3 13 4 12 5 7 10 11 Absolute Maximum Ratings at TA = 25˚C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1] (1/8 Duty Cycle at 10 kHz) Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Wave Soldering Temperature for 3 seconds[4] (2 mm [0.078 in.] below Body) GaP Red HDSP-B581/B582 65 GaP Green HDSP-B581/B582 65 Units mW 80 25[1,2] 3 –35 to +85 –35 to +85 100 25[1,3] 3 –35 to +85 –35 to +85 mA mA V °C °C 250 250 °C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25°C at 0.20 mA/°C. 3. Derate above 25°C at 0.33 mA/°C. 4. Not recommended to be soldered more than two times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds. 5 Optical/Electrical Characteristics at TA = 25˚C GaP Red Devices HDSPParameter Peak Wavelength B581/ B582 Dominant Wavelength[2] Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol λpeak λd VF VR I v-m Min. Typ. 640 628 2.1 Max. 2.6 3.0 Units nm Test Conditions IF = 20 mA nm V V IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor Units nm nm V V Test Conditions IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor Units Cd/m2 Test Conditions IFP = 40 mA, 1/8 Duty Factor 2:1 GaP Green Devices HDSPParameter Peak Wavelength Dominant Wavelength[2] B581/ Forward Voltage B582 Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol λpeak λd VF VR I v-m Min. Symbol Iv Min. 72 Typ. 568 573 2.3 Max. 2.6 3.0 2:1 Bi-Color Devices HDSPParameter Luminance/Unit B581 (Digit Average)[1] B582 Typ. 110 Max. 179 Notes: 1. The digits are categorized for luminance. The luminance category is designated by a letter on the side of the package. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 6 Bi-Color (Cd/m2 at IFP = 40 mA, 1/8 Duty Factor) Min.[2] 72 86 104 124 149 Bin Name E F G H I Max.[2] 86 104 124 149 179 Hue Grade Coordinate X 4 0.542-0.553 5 0.552-0.563 Bin 6 0.562-0.573 7 0.572-0.583 8 0.582-0.593 Y 0.445-0.456 0.435-0.446 0.425-0.436 0.415-0.426 0.405-0.416 30 25 GaP RED 20 15 GaP GREEN 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable average current per dot vs. ambient temperature. 7 50 GaP Red 40 30 20 GaP GREEN 10 0 1.0 1.4 1.8 2.2 2.6 3.0 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. RELATIVE LUMINANCE (NORMALIZED TO 1 AT 40 mA PEAK) 35 IF – FORWARD CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. 3.0 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 IPEAK – PEAK FORWARD CURRENT – mA Figure 3. Relative luminance vs. peak forward current. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027 and Note 1060. Device Reliability For reliability information, please see the reliability datasheet General Purpose 5 x 8 Dot Matrix Bi-Color Displays. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. 5988-2005EN June 23, 2006