PD104SL7 Version：1.1 FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PD104SL7 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Contents 2 1 Application 3 2 Features 3 3 Mechanical Specifications 3 4 Mechanical Drawing of TFT-LCD module 4 5 Input Terminals 5 6 Absolute Maximum Ratings 7 7 Electrical Characteristics 7 8 Power On Sequence 13 9 Optical Characteristics 14 10 Handling Cautions 17 11 Reliability Test 18 12 Block Diagram 19 13 Packing 20 - Revision History 21 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PD104SL7 1.Application This data sheet applies to a color TFT LCD module, PD104SL7. PD104SL7 module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. This module is not designed for aerospace, avionics, medical, F/A, transportation, car or any other products, which require extreme level of reliability. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors：262,144 colors . Optimum Viewing Direction：6 o’clock . 3.3V LVDS interface standard: THC63LVDF64A as receiver . +3.3V DC supply voltage for TFT LCD panel driving . Backlight driving DC/AC inverter not included in this module .Long Life Lamp 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 26.4(diagonal) 10.4 (diagonal) 800×(R, G, B)×600 262,144 211.2(H)×158.4 (V) 0.264 (H)×0.264 (V) Stripe 238.6 (w)×171.0(H)×6.0(typ.) (D) 310(typ.),320(max.) Single CCFL, side-light type Anti-glare Normally white Unit cm inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PD104SL7 TYP 4. Mechanical Drawing of TFT-LCD Module ACTIVE AREA) POLARIZER) BEZEL OPENIBG) ACTIVE AREA) POLARIZER) BEZEL OPENING) Unit: mm The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PD104SL7 5. Input Terminals 5-1) TFT-LCD Panel Driving Connector type: Molex 53779-1470 Pin No. Symbol Function 1 VDD Power supply : +3.3V 2 VDD Power supply : +3.3V 3 GND 4 GND 5 IN0Pixel data Transmission pair 0 (negative -) 6 IN0+ Pixel data Transmission pair 0 (positive +) 7 IN1Pixel data Transmission pair 1 (negative -) 8 IN1+ Pixel data Transmission pair 1 (positive +) 9 IN2Pixel data Transmission pair 2 (negative -) 10 IN2+ Pixel data Transmission pair 2 (positive +) 11 CLKSampling Clock (negative -) 12 CLK+ Sampling Clock (positive +) 13 GND 14 GND Remark Recommended Transmitter (THC63LVDM63A Thine) to PD104SL7 interface Assignment: To PD104SL7 Input terminal of Output signal Graphic controller output signal interface THC63LVDM63A symbol terminal(Symbol) Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data Tout0No.5 : IN0TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data Tout0+ No.6 : IN0+ TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data Tout1No.7 : IN1TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) Tout1+ No.8 : IN1+ TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data Tout2No.9 : IN2TIN17 20 B5 Blue pixel data(MSB) TIN18 22 NC No connection Tout2+ N0.10 : IN2+ TIN19 23 NC No connection TIN20 25 ENAB Compound Synchronization signal CLK in 26 NCLK Data sampling clock TCLK outNo.11 : CLK INTCLK out+ No.12 : CLK IN+ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PD104SL7 Data stream of IN0-/+, IN1-/+ and IN2-/+ for PD104SL7 IN0 RxOUT6 RxOUT5 RxOUT4 RxOUT3 RxOUT2 RxOUT1 G0 R5 R4 R3 R2 R1 IN1 RxOUT13 RxOUT12 RxOUT11 RxOUT10 RxOUT9 RxOUT8 B1 B0 G5 G4 G3 G2 IN2 RxOUT13 RxOUT12 RxOUT11 RxOUT10 RxOUT9 RxOUT8 ENAB NC NC B5 B4 B3 RxOUT0 R0 RxOUT7 G1 RxOUT7 B2 LVDS Interface Block Diagram NC NC ENAB CLK IN TIN12~TIN17 TIN18 TIN19 TIN20 IN0+ IN1IN1+ IN2IN2+ RxOUT0~RxOUT5 RxOUT6~RxOUT11 RxOUT12~RxOUT17 RxOUT18 RxOUT19 RxOUT20 LCD Internal Circuit B0~B5 TIN6~TIN11 IN0- LVDS to TTL parallel G0~G5 TIN0~TIN5 TTL parallel to LVDS Graphic Controller Circuit R0~R5 CLK- TCLK IN PLL THC63LVDM63A Customer system side CLK+ PLL CLK OUT THC63LVDF64A PD104SL7 module side 5-2) Backlight driving Connector type : “BHSR-02VS-1” of Japan Solderless Terminal MFG Co. LTD PIN NO. Symbol Description Remark 1 VL1 Input Voltage(High) 2 VL2 Input Voltage(Low) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PD104SL7 6. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Backlight Driving Voltage Backlight Driving Frequency Symbol VDD VIN VL FL MIN. -0.3 -0.3 0 GND=0V, Ta=25℃ Unit Remark V V Note 6-1 V KHz MAX. +4.0 VDD+0.3 2000 100 Note 6-1: LVDS signal . 7. Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol Supply Voltage VDD Current Dissipation IDD LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Min. 3.0 -100 Typ. 3.3 350 - Max. 3.6 450 100 - GND = 0V，Ta = 25℃ Unit Remark V mA Note 7-1 mV Note 7-2 5mA : 230 cd/m2 Note 7-3 Note 7-6 IFL=5mA Vrms Note 7-3 Lamp Current IFL 3.0 5.0 7.0 Lamp Voltage VL 477 530 583 Vs - - 1110 Vrms Vs - - 1450 Vrms FL 45 60 80 KHz -- 3.6 - W Starting Voltage (25℃) (Reference Value) Starting Voltage (0℃) (Reference Value) Lamp Driving Frequency Total power consumption (at IFL=5mA) mA Note 7-4 Note 7-5 Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black Idd current dissipation testing pattern Note 7-2 :Please refers to THC63LVDF64A specification by Thine Corporation. This LCD module conforms to LVDS standard. Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible. In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PD104SL7 Note 7-4 : The” Max of starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. Note 7-5 : Not including the efficiency of backlight DC/AC inverter Note 7-6 : Lamp current is measured with current meter for high frequency as shown below 1 2 TFT-LCD Module Inverter ~ A * Pin 2 is Vlow ** Current meter : Yokogawa 2016-01 Lamp current dissipation testing configuration 7-2) Input / Output signal timing chart (A) Vertical Timing t1 t2 CLK t3 t3 ENAB R5~R0 G5~G0 B5~B0 X,1 X,2 X,3 X,4 X,Y X,598 X,599 X,600 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PD104SL7 (B) Horizontal Timing t3 t4 tc CLK ENAB 797,Y R5~R0 G5~G0 B5~B0 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y 7,Y 799,Y X,Y 798,Y 800,Y t5 t7 t6 VIH(Min):0.8Vcc CLK VIL(Max):0.2Vcc t8 ENAB R5-R0 G5-G0 B5-B0 t9 VIH(Min):0.8Vcc VALID DATA a Input Signal CenterLevel: 0.5Vcc VIL(Max):0.2Vcc b CLK 0.5Vcc Duty ( a ,b ) : 50 ± 10% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PD104SL7 C) Timing Specifications Item Symbol Frame Cycling t1 Vertical Display Period t2 Horizontal Scanning Time t3 Horizontal Display Period t4 Clock Cycle t5 Clock High Level Time t6 Clock Low Level Time Min. Typ. Max. Unit Remark 604 X t3 628X t3 800 X t3 - - 16.58 - ms 600 X t3 600 X t3 600 X t3 - 920 X t5 1056 X t5 1064 X t5 - - 26.4 - μs - 800 X t5 - - 25.0 - ns 9.0 - - ns t7 9.0 - - ns Hold time t8 4.0 - - ns Set-up time t9 5.0 - - ns The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PD104SL7 7-3) Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PD104SL7 7-4) Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 598 th Line RGBRGB RGB 599 th Line RGBRGBRGB 600 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PD104SL7 8 .Power On Sequence 3.0 V 0 s< t <35 m s 0 s< t <35 m s 3.0 V VDD Signal 2t 1 0<t 1 B acklight 1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (ENAB,CLK, Data) low level or high impedance The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PD104SL7 9. Optical Characteristics 9-1) Specification: Parameter Symbol θ Horizontal θ(to 12 Viewing Angle o’clock) Vertical θ(to 6 o’clock) Condition CR≥10 Tr Tf Optimum direction θ=0° φ=0° Luminance L θ=0°/φ=0° Luminance Uniformity U x y Contrast Ratio Rise Fall Response time White Chromaticity Lamp Life Time Cross Talk Ratio CR TYP. 45 MAX. - Unit deg 10 15 - deg 35 40 - deg 200 400 - - Note 9-2 - 15 25 50 50 ms ms Note 9-4 200 230 - cd/㎡ 0.35 0.38 3.5 % hr % 70 80 0.29 0.32 0.32 0.35 20000 - CTK Ta = 25℃ Remarks MIN. 40 Note 9-1 IFL=5mA, Note 9-3 Note 9-5 IFL=5mA Note 9-6 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PD104SL7 Note 9-1`：The definitions of viewing angles are as follows. Lamp connector θ 12 o’clock 3 o’clock 9 o’clock 6 o’clock φ Note 9-2 : The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 9-3：The typical luminance value is measured at lamp current 5.0 mA. The max luminance value is measured at lamp current 7.0 mA. Note 9-4: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 9-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PD104SL7 The test pattern is white (Gray Level 63). 25% 50% 75% 25% 50% 75% Note 9-6: Cross Talk (CTK) = ⏐YA-YB⏐ YA ×100% YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PD104SL7 10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PD104SL7 11. Reliability Test No Test Item Test 1 High Temperature Storage Test Ta = +70℃, 240 hrs 2 Low Temperature Storage Test Ta = -20℃, 240 hrs 3 High Temperature Operation Test Ta =+60℃, 240 hrs 4 Low Temperature Operation Test Ta = 0℃, 240 hrs 5 6 7 8 9 Condition Remark High Temperature & High Humidity Ta = +60℃, 80%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test 0℃ÅÆ+60℃, 100 Cycles (non-operating) Vibration Test 1Hr 1Hr Frequency：10 ~ 57 HZ , Amplitude：0.15 mm 58~500Hz, 1G Sweep time: 11 min (non-operating) Test Period: 3 hrs (1 hr for each direction of X, Shock Test Y, Z) 80G, 6ms, X,Y, Z (non-operating) Electron Static Discharge 1 times for each direction C=150pF,R=330Ω Contact=±8KV Air=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] 1. Main LCD should normally work under the normally condition no defect of function,screen quality and appearance (including : mura ,line defect ,no image) 2. After the temperature and humidity test, the luminance and CR (Contrast ratio) ,should not be lower than minimum of specification. 3. After the vibration and shock test , can’t be found chip broken. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PD104SL7 12.Block Diagram VL1 B a c k -lig h t(L a m p 1 ) VL2 1 ENAB Gate Driver G0 G 11 T F T -L C D D is p la y A re a G5 B0 B1 … IN 2 -/+ R5 … IN 1 -/+ R0 R1 … IN 0 -/+ 3 CLK Control Circuit C LK LVDS Interface (THC63LVDF64A) ENAB 2 B5 598 599 600 1 2 3 4 VDD Pow er 2400 S o u rc e D riv e r M o d u le The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PD104SL7 13.Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PD104SL7 Revision History Rev. 0.1 1.0 1.1 Issued Date Revised Content Oct.19,2005 Dec.6.2005 New Modify Feb.14,2006 Page14: 9. Optical Characteristics 9-1) Specification→Life time from 15000(hr) change to 20000(hr)(Min) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21