ARIZONA MICROTEK, INC. AZ100LVEL58 ECL/PECL 2:1 Multiplexer PACKAGE AVAILABILITY FEATURES • • • • • • • Green / RoHS Compliant / Lead (Pb) Free Packages Available 440ps Propagation Delay Operating Range of 3.0V to 5.5V Internal Input Pulldown Resistors Q Output will Default LOW with Inputs Open or at VEE Transistor Count = 58 Devices Direct Replacement for ON Semiconductor MC100LVEL58 PACKAGE SOIC 8 AZ100LVEL58D TSSOP 8 AZ100LVEL58T MLP 8 (2x2) RoHS Compliant / Lead (Pb) Free MLP 8 (2x2) Green / RoHS Compliant / Lead (Pb) Free 1 MARKING AZM100 LVEL58 AZH LV58 NOTES 1,2,3 1,2,3 AZ100LVEL58N+ L5+ <Date Code> 1,2 AZ100LVEL58NG L5G <Date Code> 1,2 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date code format: “Y” for year followed by “WW” for week. Date code “YWW” or “YYWW” on underside of part. 2 3 DESCRIPTION PART NO. The AZ100LVEL58 is a 2:1 multiplexer. The device is pin and functionally equivalent to the EL58. With AC performance similar to the EL58 device, the LVEL58 is ideal for the low voltage applications that require the ultimate in AC performance. If desired, the select input can be directly driven from a CMOS output. NOTE: Specifications in the ECL/PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM AND PINOUT ASSIGNMENT FUNCTION TABLE SEL Q H L Da Db NC 1 8 VCC Da 2 7 Q 3 6 Q SEL 4 5 VEE PIN DESCRIPTION PIN Da, Db Q, Q ¯ SEL VCC VEE NC FUNCTION Data Inputs Differential Outputs Select Input Positive Supply Negative Supply No Connect MUX Db 1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541 www.azmicrotek.com AZ100LVEL58 Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +8.0 0 to +6.0 -8.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA °C °C 100K ECL DC Characteristics (VEE = -3.3V, VCC = GND) Symbol Characteristic 1 Min -1085 -1830 -1165 -1810 -40°C Typ -1005 -1695 Max -880 -1555 -880 -1475 150 VOH Output HIGH Voltage VOL Output LOW Voltage1 VIH Input HIGH Voltage VIL Input LOW Voltage Input HIGH Current IIH Input LOW Current -150 IIL IEE Power Supply Current 21 28 1. Each output is terminated through a 50Ω resistor to VCC – 2V. Min -1025 -1810 -1165 -1810 0°C Typ -955 -1705 Max -880 -1620 -880 -1475 150 -150 Min -1025 -1810 -1165 -1810 25°C Typ -955 -1705 Max -880 -1620 -880 -1475 150 -150 21 28 Min -1025 -1810 -1165 -1810 85°C Typ -955 -1705 Max -880 -1620 -880 -1475 150 -150 21 28 23 30 Unit mV mV mV mV μA μA mA 100K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol Characteristic 1,2 Min 2215 1470 2135 1490 -40°C Typ 2295 1605 Max 2420 1745 2420 1825 150 Min 2275 1490 2135 1490 0°C Typ 2345 1595 Max 2420 1680 2420 1825 150 Min 2275 1490 2135 1490 25°C Typ 2345 1595 Max 2420 1680 2420 1825 150 Min 2275 1490 2135 1490 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 VIH Input HIGH Voltage1 VIL Input LOW Voltage1 IIH Input HIGH Current Input LOW Current -150 -150 -150 -150 IIL IEE Power Supply Current 21 28 21 28 21 28 1. These values are for VCC = 3.3V. For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. 2. Each output is terminated through a 50Ω resistor to VCC – 2V. 85°C Typ 2345 1595 23 Max 2420 1680 2420 1825 150 30 Unit mV mV mV mV μA μA mA 100K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol Characteristic 1,2 Min 3915 3170 3835 3190 3620 -40°C Typ 3995 3305 Max 4120 3445 4120 3525 3740 150 Min 3975 3190 3835 3190 3620 0°C Typ 4045 3295 Max 4120 3380 4120 3525 3740 150 Min 3975 3190 3835 3190 3620 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 VIH Input HIGH Voltage1 VIL Input LOW Voltage1 VBB Reference Voltage1 Input HIGH Current IIH IIL Input LOW Current -150 -150 -150 IEE Power Supply Current 27 33 27 33 1. For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. 2. Each output is terminated through a 50Ω resistor to VCC – 2V. 25°C Typ 4045 3295 Max 4120 3380 4120 3525 3740 150 Min 3975 3190 3835 3190 3620 85°C Typ 4045 3295 -150 27 33 Max 4120 3380 4120 3525 3740 31 150 37 Unit mV mV mV mV mV μA μA mA AC Characteristics (VEE = -3.0V to -5.5V, VCC = GND or VEE GND, VCC = +3.0V to +5.5V) Symbol tPLH / tPHL fmax tr / t f Characteristic Propagation Delay to Output D to Q SEL to Q Maximum Toggle Frequency Rise/Fall Time 20 – 80% November 2006 * REV-3 Min -40°C Typ Max 340 540 435 455 560 570 Min 0°C Typ Max Min 25°C Typ Max Min 85°C Typ Max 350 360 440 460 570 580 370 380 450 470 590 600 1.5 100 260 100 www.azmicrotek.com 2 260 100 Unit ps GHz 260 100 260 ps AZ100LVEL58 PACKAGE DIAGRAM SOIC 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. November 2006 * REV-3 DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z θ www.azmicrotek.com 3 MILLIMETERS MIN MAX 1.75 0.10 0.25 1.25 1.45 0.25 0.36 0.49 0.19 0.25 4.8 5.0 3.8 4.0 1.27 5.80 6.20 1.05 0.40 1.00 0.60 0.70 0.25 0.25 0.10 0.30 0.70 8O 0O INCHES MIN MAX 0.069 0.004 0.010 0.049 0.057 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.039 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O AZ100LVEL58 PACKAGE DIAGRAM TSSOP 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. November 2006 * REV-3 www.azmicrotek.com 4 DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z θ MILLIMETERS MIN MAX 1.10 0.05 0.15 0.80 0.95 0.25 0.25 0.45 0.15 0.28 2.90 3.10 2.90 3.10 0.65 4.70 5.10 0.94 0.40 0.70 0.10 0.10 0.10 0.35 0.70 6O 0O AZ100LVEL58 PACKAGE DIAGRAM MLP 8 2x2mm Pin 1 Dot By Marking 2.000±0.050 MLP 8 (2x2mm) 2.000±0.050 TOP VIEW Pin 1 Identification R0.100 TYP 0.350±0.050 0.250±0.050 0.500 bsc 8 1 7 6 2 1.200±0.050 exp. pad 3 5 4 0.600±0.050 exp. pad BOTTOM VIEW 0.750±0.050 0.000-0.050 1 2 SIDE VIEW Note: All dimensions are in mm November 2006 * REV-3 www.azmicrotek.com 5 3 4 0.203±0.025 1.750 Ref. AZ100LVEL58 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. November 2006 * REV-3 www.azmicrotek.com 6