G.SHDSL Magnetics Globespan • TM01347 Designed to comply with the requirements of GR1089, UL1950, EN60950, BABT and CSA950 to provide a supplementary insulation barrier with a working voltage of 250V • UL File Number E150991 • Minimum interwinding breakdown voltage of 1500 Vrms • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C DCR3 Ω max Turns Ratio ±2% Inductance1 mH ±4% Leakage Inductance2 µH max Chip : Line (1-5) (1-5) Chip Side 1:4 2.07 13 0.40 Interwinding Capacitance4 pF max Longitudinal Balance5 dB max Insertion Loss5 dB max Frequency Response5 dB max Harmonic Distortion5 dB max Line Side Chip : Line 20kHz 300kHz 100kHz 40kHz 300kHz 5kHz Fundamental 1.45 85 -55 0.50 0.30 -75 Part Number 0560-6600-CP All measurements are made with pins 2 and 4 connected. 1. Inductance measured at 10kHz, 0.1 Vac. 2. Leakage inductance measured at 10 kHz, 0.1 Vac. Short terminals 7 and 9. 3. DCR requirement is for each winding. 4. Interwinding capacitance measured at 10 kHz, 0.1 Vac. 5. Measurements made with 135Ω source and 8.4Ω load impedance. SCHEMATIC 0560-6600-CP 1 9 4 Chip Line 2 7 5 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 07.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 G.SHDSL Magnetics Globespan TM01347 MECHANICAL 0560-6600-CP 1 5 10 6 0550 [13.97] max 0.525 [13.34] max 0.500 [12.70] max 0.020 [0.51] Sq. typ 0.098 [2.50] 0.110 ±0.010 [2.79 ±0.25] 0.394 [10.00] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2001 Bel Fuse Inc. Specifications subject to change without notice. 07.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2