INTEGRATED CONNECTOR MODULES Gigabit belStick™ BM01813 • Quad port shielded RJ-45 connector with integrated Gigabit Ethernet magnetics • Complies with IEEE 802.3ab standards and all Gigabit Ethernet specifications • Compatible with a variety of Gigabit Ethernet transceiver ICs and 10/100Base-TX transceiver ICs • Integrated design conserves valuable board space • Minimum interwinding breakdown voltage of 1500 Vrms • Operating temperature 0° to +70° C • Adaptable, modular design provides higher reliability • Storage temperature -40° to +85° C ELECTRICAL SPECIFICATIONS AT 25° C Insertion Loss dB max Return Loss dB min Part Number Common to Differential Mode Rejection dB min Common to Common Mode Rejection dB min 0.1MHz to 100MHz 0.5MHz to 40MHz 40MHz to 100MHz 100KHz to 100MHz 100KHz to 100MHz -1.0 -18 12 - 20 log (f/80 MHz) -40 -30 0813-1X4T-23 Crosstalk dB min Hipot Vrms min 33 - 20 log (f/50MHz) 1500 SCHEMATIC 0813-1X4T-23 Line Side Chip Side 11 RJ45 1CT : 1CT 1 12 2 10 4 1CT : 1CT 3 6 5 3 1 6 Available Options 1CT : 1CT 4 • Various high voltage capacitor values 2 8 • Various transformer turns ratios 5 1CT : 1CT 7 7 9 8 75Ω x4 1000pF 2kV Shield ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 INTEGRATED CONNECTOR MODULES Gigabit belStick™ BM01813 Notes MECHANICAL Plastic Housing Contacts Pins Solderability Metal Shield 0813-1X4T-23 2.415 ±0.020 [61.34 ±0.51] Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy 2.311 [58.70] max Pin 1 1.200 [30.48] 0.015 [0.38] 0.536 ±0.010 0.591 ±0.010 [13.61 ±0.25] [15.01 ±0.25] 0.305 [7.75] 0.125 [3.18] 0.450 [11.43] 0.725 [18.42] 0.550 [13.97] Pitch 0.145 [3.68] 0.125 [3.18] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. 0.825 [20.96] 2.285 [58.04] 2.150 [54.61] 0.550 [13.97] Pitch PAD LAYOUT 0.068 [1.71] ø0.062 [ø1.57] 4 places 0.125 [3.18] 0.825 [20.96] ø0.128 [ø3.25] 2 places 0.450 [11.43] 0.050 [1.27] 0.725 [18.42] 1 6 1 6 1 6 1 6 7 12 7 12 7 12 7 12 0.040 [1.02] 0.080 [2.03] Suggested PCB Pad Layout Component Side View ø0.035 [ø0.89] 48 places 2.350 [59.69] 0.080 [2.03] 0.566 [14.38] Suggested Panel Opening ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2