PMM0204 Vishay Draloric Metal Film, Cylindrical Resistors FEATURES ∑ Stable metal film on high quality ceramic ∑ Very low TC and tight tolerances ∑ Excellent stability at different environmental conditions ∑ Force fitted steel caps, tin plated on nickel barrier STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70°C1) W MODEL 1) 2) • LIMITING ELEMENT VOLTAGE MAX2) V TEMPERATURE COEFFICIENT ppm/K TOLERANCE % RESISTANCE RANGE W E-SERIES PMM0204 0.125 100 5 0.1, 0.25 100R - 100K 96 - 192 PMM0204 0.125 100 10 0.1, 0.25 100R – 221K 96 – 192 PMM0204 0.125 100 15 0.1, 0.25 100R – 221K 96 – 192 PMM0204 0.125 100 25 0.1, 0.25 100R – 221K 96 – 192 PMM0204 0.125 100 50 0.1, 0.25 100R – 221K 96 – 192 Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material Rated voltage: • Coating: green • Without TC-band • Marking :see appropriate catalog or web page PxR TC £ 10ppm/°C: temperature range is - 10°C to + 85°C TECHNICAL SPECIFICATIONS PARAMETER UNIT PMM0204 Rated Dissipation at 70°C W 0.125 Limiting Element Voltage2) V 100 Insulation Voltage (1 min) V dc/ac peak 200 Thermal Resistance3) K/W £ 220 Insulation Resistance W ≥ 10 10 Category Temperature Range Failure Rate °C - 10 / + 100 10 –9 /h <1 g 18 Weight / 1000pcs 2) Rated voltage: 3) Based on measurements on test board acc. to EN 140000 PxR PACKAGING: see SMM0204 ORDERING INFORMATION PMM0204 25 562R 0.1% B1 MODEL TC ppm / K RESISTANCE VALUE W TOLERANCE ± % PACKAGING B1-Blistertape 1000 pcs Document Number: 20006 Revision: 20-Oct-03 For Technical questions contact: [email protected] www.vishay.com 1 PMM0204 Vishay Draloric Metal Film Cylindrical Resistors DIMENSIONS DIMENSIONS [in millimeters] MODEL PMM0204 Dmax d* L Amax Amin 1.4 D -0.15 3.6 - 0.15 0.85 0.5 *d measured in the middle of the resistor SOLDER PAD DIMENSIONS [in millimeters] MODEL REFLOW SOLDERING WAVE SOLDERING 3 Rated Power in % Current Noise in mV/V PMM0204 2 1 0.5 a b l a b l 1.0 1.6 2.2 1.2 1.6 2.2 120 100 80 0.3 60 0.1 40 0.05 0.03 0.01 20 0 1K 5K 10K 50K 100K 500K 1M Resistance Value in W Current Noise -55 -25 0 Current Noise 25 50 75 100 70 Ambient Temperature in ∞C PERFORMANCE TEST CONDITIONS OF TEST Endurance Test at 70°C IEC 60115-1 4.25.1 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" TEST RESULTS £ ± 0.1% Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125°C without load £ ± 0.1% Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds 2.5 x rated voltage or £ 2 x limiting element voltage £ ± 0.02% Thermal Shock IEC 60115-1 4.19 IEC 60068-2-14 Rapid change between upper and lower category temperature £ ± 0.02% Damp Heat Steady State IEC 60115-1 4.24 IEC 60068-2-3 56 days at 40°C and 93% relative humidity £ ± 0.2% Resistance to Soldering Heat IEC 60115-1 4.18 IEC 60068-2-20 10 seconds at 260°C solder bath temperature £ ± 0.05% APPLICABLE SPECIFICATIONS • CECC40000 / 40400 / 40401-803 • EN140400 / IEC 60115 – 1 www.vishay.com 2 For Technical questions contact: [email protected] Document Number: 20006 Revision: 20-Oct-03