5 x 20mm Ceramic Tube RoHS Compliant Type 5HT / 5HTP Time-lag Fuse Series (High - Breaking Capacity) W5HTD0405-A21 Electrical Characteristics (IEC-127-2 STANDARD SHEET 5) Typical Volt-drop Melting I2T Melting I2T Maximum Cold @100% In < 10 mSec @10 In Power Resistance Dissipation 2 2 (ohm) (Volt) max. (A Sec) (A Sec) (W) Catalog Number RoHS Suffix Ampere Rating 5HT (P) 100 -R 100mA 18.00 2.05 0.059 0.06 0.27 5HT (P) 160 -R 160mA 12.10 1.80 0.035 0.04 0.28 5HT (P) 200 -R 200mA 8.00 1.50 0.062 0.08 0.30 5HT (P) 250 -R 250mA 3.40 1.20 0.098 0.12 0.34 5HT (P) 315 -R 315mA 2.20 1.00 0.18 0.22 0.38 MIN MAX MIN MAX MIN MAX MIN MAX 5HT (P) 400 -R 400mA 1.40 0.75 0.28 0.34 0.41 100mA to 3.15A 1 30 1 80 95 5 10 100 5HT (P) 500 -R 500mA 1.00 0.70 0.46 0.58 0.48 4A and above 1 30 1 80 150 5 20 100 5HT (P) 630 -R 630mA 0.60 0.52 0.70 0.90 0.55 hr. min. sec sec ms sec ms ms 5HT (P) 800 -R 800mA 0.40 0.45 1.08 1.50 0.64 5HT (P) 1 -R 1A 0.20 0.25 1.70 1.70 0.73 5HT (P) 1.25 -R 1.25A 0.14 0.22 3.00 3.20 0.81 5HT (P) 1.6 -R 1.6A 0.10 0.20 5.40 5.90 0.91 5HT (P) 2 -R 2A 0.07 0.19 9.70 5HT (P) 2.5 -R 2.5A 0.05 0.17 5HT (P) 3.15 -R 3.15A 0.04 0.14 Certificate No. EM232 5HT (P) 4 -R 4A 0.03 0.10 r Recognized File No. E20624 5HT (P) 5 -R 5A 0.02 0.11 S Acceptance File No. LR39772 5HT (P) 6.3 -R 6.3A 0.01 0.074 p File No. JET1037-31003-1004, JET1037-31003-1005 5HT (P) 8 -R 8A 0.009 c 5HT (P) 10 -R 10A 0.007 Licence No. 2002010207021531 Rated Current Approvals 1.5 In 2.1 In 2.75 In 10 In sdm rSpcc Safety Agency Approvals s d m 4 In Amp range / Volt @ I.R. ability Certificate No. 408893 Licence No. 40000505 1A - 6.3A / 250V AC @ 1,500A 250mA - 10A / 250V AC @ 1,500A 1A - 5A / 250V AC @ 1,500A 250mA - 10A / 250V AC @ 1,500A RoHS Compliant Product For RoHS Compliant Version, add suffix “R” after catalog number Operating Temperature -55ºC to +125ºC Physical Specification Materials Ceramic body / Nickel Plated Brass Caps Lead wire: Tin plated copper alloy, Diameter 0.032", 6.3A and less Diameter 0.040", 8A and above Marking On fuse: “bel”, “T”, “Current Rating”, “H”, “250V”, “Appropriate Safety Logos”, “✔” (RoHS Version) On label: “bel”, “5HT”, or “5HTP”,“Current Rating”, “Voltage Rating”, “Interrupting Rating”, “Approporiate Safety Logos” and + suffix “R” for RoHS Version 11 1.00 17 20 1.10 31 38 1.20 56 69 1.40 101 128 1.50 181 237 1.70 0.092 330 439 2.70 0.078 601 812 2.90 Consult manufacturer for other ratings Packaging 1. In bulk: 5HT - 1,000 pcs per box; 5HTP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1@ 10mm Pitch and 63.5mm inside Tape Spacing Mechanical Dimensions 5HT 1.5" ± 0.08" (38.1 ± 2mm) 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) 5HTP SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice 5HTD1105 ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: www.belfuse.com 47 5 x 20mm Ceramic Tube RoHS Compliant Type 5HT / 5HTP Time-lag Fuse Series (High - Breaking Capacity) 5HTC0405 W5HTC0305-A1 E5HTC0405A1 - 100mA - 160mA - 200mA - 250mA - 315mA - 400mA - 500mA - 630mA - 800mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3.15A - 4A - 5A - 6.3 A - 8A - 10A 5HT / 5HTP - TIME CURRENT CHARACTERISTIC CURVE 10000 1000 TIME IN SECONDS 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 48