“Slim Line” Hybrids for Infineon T1/E1/J1 IC’s APC822XX-I FEATURES • Supports Falc and Quad Falc Chipsets for T1/E1/J1 applications including numbers PEB2256, PEB22554 and PEB22504 • Minimum board space requirement - ideal for multiple interface line cards • Telcordia Technologies and FCC compliant • UL1950. Approval pending for EN60950 / IEC60950 • APC’s “Slim Line” T1/E1/J1 hybrids have been designed to minimize the board space requirements for line interface circuitry on the T1/E1/J1 multichannel line cards SCHEMATIC 1 13 3 11 Tx 2 Vcc9 GND12 5 10 7 8 Rx 6 NOTE: SCHEMATIC SHOWN PROVIDES LONGITUDINAL PROTECTION. FOR METALLIC PROTECTION, CONNECT 1 - 3 (2 N/C) AND 5 - 7 (6 N/C) MECHANICAL Side View Front View Recommended PCB Layout 37.70 MAX 8.05 Max Back Front Recommended Hole Size Ø1.0 Front 11.80 MAX 1 2.54 PITCH IN 11 PLACES Pin 1 5.08 3.3 Max 2.35 NOTE: ALL DIMENSIONS IN MM ©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1 “Slim Line” Hybrids for Infineon T1/E1/J1 IC’s APC822XX-I PRODUCT RANGE AND APPLICATIONS Single T1/E1 Hybrid (SIP) APC… Application Voltage Protection Tx T/R Rx T/R 82201 PEB2256 (Falc56) Infineon Chip PEB22504 (QuadLIU) PEB22554 (QuadFalc) E1(120 ohm) 3.3V Metallic 2.4 1.0 82202 PEB2256 (Falc56) PEB22504 (QuadLIU) PEB22554 (QuadFalc) E1(120 ohm) 3.3V Longitundinal 2.4 1.0 82207 PEB2256 (Falc56) PEB22504 (QuadLIU) PEB22554 (QuadFalc) T1/J1 (100 ohm) 3.3V Metallic 2.4 1.0 82208 PEB2256 (Falc56) PEB22504 (QuadLIU) PEB22554 (QuadFalc) T1/J1 (100 ohm) 3.3V Longitundinal 2.4 1.0 82237 PEB2256 (Falc56) PEB22504 (QuadLIU) PEB22554 (QuadFalc) Generic T1/E1/J1 3.3V Metallic 2.4 1.0 82238 PEB2256 (Falc56) PEB22504 (QuadLIU) PEB22554 (QuadFalc) Generic T1/E1/J1 3.3V Longitundinal 2.4 1.0 HYBRID V DISCRETE SOLUTIONS PTC's Associated Circuitry APC46824A Infineon PEB22554 APCSIP Hybrid APCSIP Hybrid Infineon PEB22554 APC46824A APCSIP Hybrid APCSIP Hybrid APC's SIP Hybrid Solution. APC46824A Overvoltage Protection APC46824A Discrete Solution, as per example layout ©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Stewart Connector 45/46 Riverside Medway City Estate Rochester, Kent ME2 4DP U.K. Tel 44-1634-722890 Fax 44-1634-716677 www.belfuse.com Page 2