defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960062A • Designed for use with Seeq 80C24-26 and 83C95-96 10Base-T PHY transceivers • Single and dual port designs available with and without common mode chokes • Conforms to IEEE 802.3 standards • Through-hole and surface mount packaging • 2000 Vrms isolation ELECTRICALS AT 25ºC Part No. A553-1084-01 S553-1084-01 S553-1084-05 S553-1084-06 S553-1084-11 S553-1084-16 Turns Ratio (transmit) Insertion Loss (dB) Max 1-10MHz 2CT:1 2CT:1 2CT:1CT 2CT:1 2CT:1CT 2CT:1CT -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 OCL (µH) Min Return Loss (dB) Min 5-10MHz Crosstalk (dB) Min 1MHz-10MHz 80 80 200 80 80 80 -18 -18 -18 -18 -18 -18 -40 -40 -40 -40 -40 -40 CM-CM Rej (dB) Min 10-30MHz 100MHz N/A N/A N/A -40 N/A -40 N/A N/A N/A -30 N/A -30 Schematic Package Style A A B C D E 1 2 3 2 2 2 SCHEMATICS A B D E Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com C Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960062A MECHANICALS 1 2 3 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960062A APPLICATION CIRCUIT Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960062A APPLICATION NOTES • All receive transformers (except for S553-1084-05) have 1CT:1CT turns ratio. • Multiple design options offered to optimize individual PCB layouts and grounding configurations. Consult Bel engineering for assistance in choosing the best solution. • Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each part is optically inspected to meet rigid coplanarity requirements. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366