HIGH FREQUENCY MAGNETICS T1/E1 Octal Transformer Modules TM01109 • Optimized for PMC-Sierra PM4354 Quad COMET • Operating temperature range -40° to +85°C • Eight transformers in one surface-mount package • Meets IEC 695, 2-2 flammability requirements • Two modules: S553-6500-A7 with eight transformers S553-6500-A8 with eight transformers and IC-side surge protection devices • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: Shock, vibration, temperature cycling, temperature - humidity - bias • Interwinding breakdown voltage: 1500 Vrms min • UL 1950 approved: S553-6500-A7 file number E150991 S553-6500-A8 pending • Tight ratio tolerance assists impedance matching • Meets ITU-T G.703 return loss from -40° to +85° C ELECTRICAL SPECIFICATIONS at 25° C Part Number Turns Ratio ±2% IC : Line Primary Inductance1 µH min Leakage Inductance1 µH max Return Loss at 102 kHz 120Ω Application2 DCR Ω max Interwinding Capacitance pF max TX RX IC Side IC Side IC Side Line Side S553-6500-A7 1 : 2.42 1 : 2.42 950 0.3 0.6 1.3 S553-6500-A8 1 : 2.42 1 : 2.42 950 0.3 0.6 1.3 25° C dB typ -40 to +85° C dB min TX RX TX RX 35 18 27 17 24 35 18 27 17 24 1. Inductance at 10 kHz, leakage inductance at 1 MHz 2. Terminated in 25.4 Ω for TX and 18.2 Ω for RX SCHEMATIC S553-6500-A8 S553-6500-A7 Line Side IC Side Line Side IC Side 1 TXI+ 1 2 1 TXI- 3 1 RXO+ 4 1 : 2.42 40 1 TXO+ 39 38 1 TXO- 1 : 2.42 1 TXI+ 1,2 3.3V 1 TXI- 1 2 3 1 RXO+ 4 37 1 RXI+ 1 RXO- 5 36 1 RXI- 1 RXO- 5 2 TXI+ 6 2 TXI- 7 8 2 RXO+ 9 1 : 2.42 34 33 2 TXO1 : 2.42 3 TXI- 1 : 2.42 1 : 2.42 3 RXO- 15 4 TXI+ 16 4 TXI- 4 RXO- 20 30 3 TXO+ 29 28 3 TXO27 3 RXI+ 26 3 RXI- 1 : 2.42 17 18 4 RXO+ 19 6 7 8 2 TXI- 2 RXO+ 9 2 RXO- 10 12 13 3 RXO+ 14 2 TXI+ 1,2 GND 32 2 RXI+ 31 2 RXI- 2 RXO- 10 3 TXI+ 11 35 2 TXO+ 1 : 2.42 3 TXI+ 11 3,4 3.3V 12 3 TXI- 13 3 RXO+ 14 3 RXO- 15 25 4 TXO+ 24 4 TXI+ 16 3,4 GND 17 4 TXI- 18 23 4 TXO- 4 RXO+ 19 22 4 RXI+ 21 4 RXI- 1 : 2.42 S U R G E 1 : 2.42 D E V I C E S 4 RXO- 20 ©2005 Bel Fuse Inc. 37 1 RXI+ 36 1 RXI- 1 : 2.42 P R O T E C T I O N 40 1 TXO+ 39 38 1 TXO- 35 2 TXO+ 34 33 2 TXO- 1 : 2.42 32 2 RXI+ 31 2 RXI- 1 : 2.42 1 : 2.42 30 3 TXO+ 29 28 3 TXO27 3 RXI+ 26 3 RXI- 1 : 2.42 25 4 TXO+ 24 23 4 TXO- 1 : 2.42 22 4 RXI+ 21 4 RXI- Specifications subject to change without notice. 05.05 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 HIGH FREQUENCY MAGNETICS T1/E1 Octal Transformer Modules TM01109 MECHANICAL 1.100 [27.94] max 0.070 [1.78] ref 0.050 [1.27] S553-6500-A7 S553-6500-A8 0.645 [16.38] 0.480 [12.19] 0.020 ±0.002 [0.51 ±0.05] 0.050 [1.27] 0.070 [1.78] 0.030 [0.77] Suggested PCB Pad Layout ø0.015 [0.39] S553-6500-A7 0.212 [5.38] ref ø0.005 [0.13] 0.225 [5.72] max 0.950 [24.13] 0.035 [0.89] 0.004 [0.10] 0.600 [15.24] 0.005 [0.13] min 0˚- 5˚ ø0.015 [0.39] ø0.005 [0.13] S553-6500-A8 0.004 [0.10] 0.265 [6.73] ref 0.005 [0.13] min 0.295 [7.49] max 0.950 [24.13] 0.035 [0.89] 0˚- 5˚ 0.600 [15.24] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. S553-6500-A8 Surge Protection Devices TVS Diode Array: Semtech SRDA3.3-4 Number of Arrays: 4 Note: Surge protection provided by the Bel module is equivalent to that advertised in the Semtech SRDA3.3-4 product specification. Tape and Reel Packaging 44 mm wide by 24 mm pitch; 13 inch OD, 6 inch ID 200 modules per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards - JEDEC SO Package ©2005 Bel Fuse Inc. Specifications subject to change without notice. 05.05 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2