HDSL Magnetics GlobeSpan MDSL/HDSL2 TM00313 • Designed to meet UL1950 and IEC 950 safety requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Operating temperature range: -40° to +85° C • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • Meets IEC 695, 2-2 flammability requirements • Minimum interwinding breakdown voltage 1500 Vrms ELECTRICAL SPECIFICATIONS AT 25° C DCR Ω max Turns Ratio ±2% Part Number Return Loss1 db max (1-3) : (2-4) : (7-5) : (8-6) (1-4) (8-5) 1:1:2:2 6 7 S560-6600-24 Insertion Loss2 db max Longitudinal Balance3 db min Harmonic Distortion4 db min Indcutance5 mH ±10% (1-4) 10 4 60 85 3.125 1. Measured at 100 kHz to 1 MHz 2. Measured at 1 kHz to 2 Mz 3. Measured at 20 kHz to 1 MHz 4. Measured at 3.5 Vrms, 10 kHz, Rs = 135 Ω, RL = 33.8 Ω 5. Measured at 10 kHz, connect 2 to 3 DCR Ω max Turns Ratio ±2% Part Number Return Loss1 db max (1-4) : (2-5) : (10-7) : (9-6) (1-4) (2-5) (9-6) (10-7) 1:1:2:2 3 3 4 4 S560-6600-37 Insertion Loss db max 1 kHz 2 MHz 4 kHz 1 MHz 4 1.1 10 Longitudinal Balance2 db min Harmonic Distortion3 db min 60 85 1. measured at 100 kHz to 200 kHz 2. measured at 20 kHz to 1 MHz 3. measured at 10 kHz SCHEMATIC S560-6600-37 S560-6600-24 1 10 4 2 7 9 5 6 1 8 3 6 2 7 4 5 ©2001Bel Fuse Inc. Specifications subject to change without notice. 06.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-43 HDSL Magnetics GlobeSpan MDSL/HDSL2 TM00313 MECHANICAL 0.200 [5.08] 6 places 0.040 [1.02] 8 places 5 8 0.200 [5.08] S560-6600-24 1.130 [28.70] 1.08 [27.43] max 0.060 [1.52] 1 4 0.860 [21.84] max 0.070 [1.78] Suggested PCB Pad Layout 0.425 [10.80] max 0.006 [0.15] min 0.005 [0.13] 0.020 [0.51] 0.035 [0.89] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. SUGGESTED PCB PAD LAYOUT 5 1 S560-6600-37 0.100 (2.54) 0.741 (18.82) 0.060 (1.52) 6 10 0.100 (2.54) 0.087 (2.21) 0.028 (0.71) 0.585 (14.86) MAX 0.540 (13.72) MAX 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX ©2001Bel Fuse Inc. Specifications subject to change without notice. 06.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-44