ADSL Magnetics For Analog Devices AD20MSP930 • Designed to meet IEC 950 safety requirements for supplementary insulation at 250V • Minimum interwinding breakdown voltage of 1500 Vrms • Complies with all of the requirements in the transformer specification generated by Analog Devices TM00305 • Operating temperature range: -40° C to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Part Number S560-6600-F3 0560-6600-E4 S560-6600-F4 0560-6600-E5 S560-6600-F5 0560-6600-E6 S560-6600-F6 0560-6600-E7 Application ADSL over ISDN - CO ADSL over ISDN - CPE ADSL over POTS - CO ADSL over POTS - CPE Turns Ratio ±2% Inductance Leakage Inductance µH max Longitudinal Balance dB min Insertion Loss dB max Frequency Response dB Chip : Line Chip Side Chip Side Chip Side Line Side 10 kHz 1.1 MHz 300 kHz 30 kHz 1.1 MHz 1:1 100 µH ±7%1 4 1 1 46 0.5 ± 0.5 -803 1 : 1.2 120 µH ±10%1 4 0.61 0.74 46 0.5 ± 0.5 -803 1 : 1.1 2 mH ±10%2 8.5 1.7 1.8 46 0.5 ± 0.5 -804 1 : 1.1 1.2 mH ±10%2 10 1.25 1.4 46 0.5 ± 0.5 -804 Package SMD THT SMD THT SMD THT SMD THT DCR Ω max Harmonic Distortion dB max All measurements are made with pins 2 and 3 connected and pins 8 and 9 connected 1. measured at 100 kHz, 1 Vac 2. measured at 20 kHz, 1 Vac 3. measured with 100 Ω source at 100 kHz, 4 Vac 4. measured with 100 Ω source at 20 kHz, 4 Vac SCHEMATIC S560-6600-F3 S560-6600-F4 S560-6600-F5 S560-6600-F6 0560-6600-E4 0560-6600-E5 0560-6600-E6 0560-6600-E7 1 10 3 8 2 9 4 7 CHIP SIDE LINE SIDE ©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-23 ADSL Magnetics For Analog Devices AD20MSP930 TM00305 MECHANICAL SUGGESTED PCB PAD LAYOUT 5 1 S560-6600-F3 S560-6600-F4 S560-6600-F5 S560-6600-F6 0.100 (2.54) 0.741 (18.82) 0.087 (2.21) 0.060 (1.52) 6 10 0.100 (2.54) 0.028 (0.71) 0.585 (14.86) MAX 0.540 (13.72) MAX 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX 1 5 0560-6600-E4 0560-6600-E5 0560-6600-E6 0560-6600-E7 6 10 0.550 (13.97) MAX 0.525 (13.34) MAX 0.500 (12.70) MAX 0.020 (0.508) SQ. TYP (PHOSPHER BRONZE, SOLDER COATED 0.110±0.010 (2.79±0.25) 0.394 (10.00) 0.098 (2.50) ©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.00 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-24