BL GALAXY ELECTRICAL RGP02-12E(Z) - - - RGP02-20E(Z) VOLTAGE RANGE: 1200 --- 2000 V CURRENT: 0.5 A FAST RECOVERY RECTIFIER FEATURES DO - 41 ◇ Low cost ◇ Diffused junction ◇ Low leakage ◇ Low forward voltage drop ◇ High current capability ◇ Easily cleaned with Freon,Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 ◇ MECHANICAL DATA ◇ Case:JEDEC DO-41,molded plastic ◇ Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 ◇ Polarity: Color band denotes cathode ◇ Weight: 0.339 grams ◇ Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. RGP02 -12E RGP02 -14E RGP02 -16E RGP02 -18E RGP02 -20E UNITS Maximum recurrent peak reverse voltage V RRM 1200 1400 1600 1800 2000 V Maximum RMS voltage V RMS 840 980 1120 1260 1400 V Maximum DC blocking voltage V DC 1200 1400 1600 1800 2000 V Maximum average forw ard rectified current 9.5mm lead lengths, @TA =75℃ I(AV) 0.5 A IFSM 20 A VF 1.8 V Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125℃ Maximum instantaneous forw ard voltage at 0.5 A Maximum reverse current at rated DC blocking voltage @TA =25℃ @TA =100℃ 5.0 IR 50 μA Maximum reverse recovery time (Note1) t rr 300 ns Typical junction capacitance (Note2) CJ 5 pF Typical thermal resistance (Note3) RθJA 80 ℃/W TJ - 65---- +150 ℃ TSTG - 65---- + 150 Operating junction temperature range Storage temperature range NOTE:1. Measured with I F =0.5A, I R=1A, I rr=0.25A. ℃ www.galaxycn.com 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3. Thermal resistance f rom junction to ambient. Document Number 0261072 BLGALAXY ELECTRICAL 1. RATINGS AND CHARACTERISTIC CURVES RGP02-12E(Z) - - - RGP02-20E(Z) FIG.1 -- REVERSE RECORERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50Ω N.1. trr 10Ω N.1. +0.5A D.U.T. ( - ) 0 (+) 50VDC (APPROX) (-) PULSE GENERATOR (NOTE2) OSCILLOSCOPE (NOTE 1) 1Ω N.1. -0.25A ( + ) -1.0A SET TIMEBASEFOR50/100 ns /cm FIG.2 --DERATING DURVE FOR OUTPUT RECTIFIED CURRENT Single Phase Half Wave 60H Z Resistive or Inductive Load 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 175 25 20 AMPERES 6 FIG.3 --MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT AVERAGE FORWARD OUTPUT CURRENT AMPERES NOTES:1.RISETIME=75ns MAX. INPUT IMPEDANCE=1MΩ.22pF 2.RISETIME=10ns MAX. SOURCEIMPEDANCE=5OΩ TJ=25℃ 8.3ms Single Half Sine-Wave 15 10 5 0 1 AMBIENT TEMPERATURE,℃ FORWARD CURRENT AMPERES 1.0 0.1 T J =25 ℃ PULSE W IDTH=300 μ s 2% DU TY CYC LE 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 6 10 20 40 60 100 FIG.5--TYPICAL REVERSE CHARACTERISTICS 2.4 FORWARD VOLTAGE,VOLTS 2.6 REVERSE CURRENT,MICRO AMPERES 2.0 0.001 4 NUMBER OF CYCLES AT 60 Hz FIG.4--TYPICAL FORWARD CHARACTERISTIC 0.01 2 10 TJ-25℃ 1.0 0.1 TJ-100℃ 0.01 0 20 40 60 80 100 120 140 PERCENT OF FATED REVERSEVOLTAGE,% www.galaxycn.com Document Number 0261072 BLGALAXY ELECTRICAL 2.