A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Package Dimension: Part NO. Housing Emitting Color Lens Color AL-6A03WC-60 ---- Amber Water Clear Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm (.010”) unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04”) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. 6. This data-sheet only valid for six months. Part No. AL-6A03WC-60 Spec No. Page 1 of 6 2007/1/16 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Absolute Maximum Ratings at Ta=25℃ Parameter Symbol MAX. Unit Forward Current IF 700 mA Peak pulsed forward current IPF 1000 mA Power Disspation PD 3 W Reverse Voltage VR 5 V Operating Temperature Range Topr -40 to +85 ℃ Storage Temperature Range Tstg -40 to +85 ℃ Soldering Temperature (Max.) Tsol 260 ± 5 seconds Part No. AL-6A03WC-60 Spec No. Page 2 of 6 2007/1/16 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Electrical Optical Characteristics at Ta=25℃ Parameter Symbol Min. Typ. Max. Unit Luminous Flux Flux --- 80 --- Im IF=700mA Forward Voltage VF 2.0 3.0 3.5 V IF=700mA Dominant Wavelength λd 587 590 595 nm IF=700mA △λ1/2 --- 20 --- nm IF=700mA Temperature Coefficient or Dominant Wavelength △λd /△Tj --- 0.05 --- nm/℃ IF=700mA Temperature Coefficient of VF △VF /△Tj --- -2.0 --- mV/℃ IF=700mA ---- --- 18 --- ℃/W IF=700mA 2θ1/2 --- 60 --- Deg IF=700mA Spectral Half-Width Termal Resistance Junction to Board Viewing Angle Part No. AL-6A03WC-60 Spec No. Test Condition Page 3 of 6 2007/1/16 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Reliability test items and conditions : NO 1 2 ITEM Test Conditions Temp：260℃±5℃ Solder Heat Temperature Cycle -40℃ 30min -25℃ 5min -105℃ 30min -25℃ 5min -40℃ 5min Sample Q’ty Ac/Re 5 sec 30 pcs 0/1 100 cycles 30 pcs 0/1 20 cycles 30 pcs 0/1 Test hours/cycle 3 Thermal Shock 4 High Temperature Storage Temp：85℃ 1000 hrs 30 pcs 0/1 5 Low Temperature Storage Temp：-35℃ 1000 hrs 30 pcs 0/1 6 DC Operating Life IF=350mA 1000 hrs 30 pcs 0/1 7 High Temperature／ High Humidity Ta=60℃ R.H 90% 1000 hrs 30 pcs 0/1 Part No. -105℃ 5min AL-6A03WC-60 Spec No. Page 4 of 6 2007/1/16 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Typical electro-optical characteristics curves : Part No. AL-6A03WC-60 Spec No. Page 5 of 6 2007/1/16 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Typical electro-optical characteristics curves : Part No. AL-6A03WC-60 Spec No. Page 6 of 6 2007/1/16