BRIGHT LED ELECTRONICS CORP. BPT-BP2334 SINCE 1981 END- LOOK PACKAGE PHOTOTRANSISTOR ● Package Dimensions: z Features 1. Wide range of collector current. 5.0(.197) 2. Lend for high sensitivity. Collector 3. Low cost plastic package. 8.6(.339) 1.0(.039) 4. Lens Appearance: Water Clear. 5. This product doesn't contain restriction Emitter 1.5(.059) MAX. substance, comply ROHS standard 23.4(.921) MIN. 0.5(.020) SQ.TYP. 5.7(.224) Emitter 1.00(.039) MIN. z Description Collector 2.54(.100) NOM. The BPT-BP2334 is a NPN silicon phototransistor mounted in a lensed , special dark plastic package . The lensing effect of the package allows an acceptance half view angle of 30∘that is measured from the optical axis to the half power point . NOTES: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.25mm (0.01’) unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package 4.Specifications are subject to change without notice z Absolute Maximum Ratings(Ta=25℃) Parameter Maximum Rating Unit Power Dissipation 100 mW Collector- Emitter Voltage 30 V Emitter- Collector Voltage 5 V Operating Temperature -45℃~+85℃ Storage Temperature Range -45℃~+100℃ Lead Soldering Temperature 260℃ for 5 seconds Rev:1.0 Page1 of 3 BRIGHT LED ELECTRONICS CORP. BPT-BP2334 SINCE 1981 z Electrical Characteristics (TA=25℃ PARAMETER Collector- Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector- Emitter Saturation Voltage Rise Time unless otherwise noted) SYMBOL MIN TYP MAX UNITS TEST CONDITIONS V(BR)CEO 30 - - V IC=0.1mA Ee=0mW/cm2 V(BR)ECO 5 - - V IR=0.1mA Ee=0 mW/cm2 VCE(SAT) - - 0.5 V IC=0.1 mA Ee=1.0 mW/cm2 Tr - 15 - μS Vcc=5V RL=1KΩ IC=1mA Tf - 15 - μS Vcc=5V RL=1KΩ IC=1mA Collector Dark Current ICEO - - 100 nA VCE=10V Ee=0 mW/cm2 On State Collector Current IC(ON) 16 - mA VCE=5V Ee=1.0mW/cm2 Fall Time z Typical Optical-Electrical Characteristic Curves FIG.1 Dark Current Vs. Ambient Temperature (uA) 1000 100 100 80 Power Dissipation Pd 10000 (mW) 120 Dark Current 10 1 0.1 0.01 (us) 0 20 60 80 100 40 Ambient Temperature 60 40 20 0 120 (°C) -25 0 FIG.3 Rise And Fall Time Vs. Load Resistance 20 Relative Collector Current Tf 12 Tr 8 4 0 0 0.2 125 (°C) 2.5 F=100Hz 16 25 50 75 100 Ambient Temperature FIG.4 Relative Collector Current Vs. Irradiance Vcc=5V Rise and Fall Time FIG.2 Power Dissipation Vs. Ambient Temperature 0.4 0.6 Load Resistance 0.8 1.0 (K ) Vce=5V 2.0 1.5 1.0 0.5 0 0 0.5 1.0 1.5 2.0 2.5 2 3.0 (mW/cm ) Irradiance Rev: 1.0 Page2 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BPT-BP2334 ● Tapping and packaging specifications(Units: mm) z Packaging Bag Dimensions Notes: 1、500pcs per bag, 5Kpcs per box. 2、All dimensions are in millimeters(inches). 3、Specifications are subject to change without notice. Rev: 1.0 Page3 of 3