5.8 mm Round Type Dual Color LED with Collar - Three Leads Viewing Angle - 64°/70° 52K-9 Series Package Dimension Directivity Radiation All Dimensions are in mm (inch) Electrical Characterstics Electro - Optical Part No. Chip Material Emitted Colour Lens Colour Wave Length λP (nm) 52K4711W-9001 52K5711W-9001 52K6711W-9001 52K4511W-9001 52K1711W-9001 52K2755W-9001 52K3755W-9001 52K1325W-9001 GaP/GaP Hi-Red GaP/GaP Yellow-Green GaP/GaP Hi-Red GaAsP/GaP Yellow GaP/GaP Hi-Red GaAsP/GaP Orange GaP/GaP Yellow-Green GaAsP/GaP Yellow GaAsP/GaP Hi-Eff Red GaN Blue GaAsP/GaP Hi-Eff Red GaN Blue Green GaAsP/GaP Hi-Eff Red GaN Blue Green GaN Blue GaN Blue Green Water Diffused Water Diffused Water Diffused Water Diffused Water Diffused Water Diffused Water Diffused Water Diffused Characterstics (If = 20mA) Vf (v) Iv (mcd) Typ. Max 700 1.8 2.6 8 570 1.8 2.6 20 700 1.8 2.6 8 585 1.8 2.6 20 700 1.8 2.6 8 605 1.8 2.6 20 570 1.8 2.6 20 585 1.8 2.6 20 635 1.8 2.6 800 470 2.6 3.8 400 635 1.8 2.6 800 505 2.6 3.8 1000 635 1.8 2.6 800 525 2.6 3.8 1000 470 2.6 3.8 400 525 2.6 3.8 1000 52K-9_LEDRev100506D Continental Device India Limited Page 1 of 2 Other Parameters applicable for all LEDs 52K-9 Series Electrical Parameter (at T a = 25ºC) Reverse Voltage Vr Forward Current If Forward Current Peak Ifp* Power Pd Operating Temp Topr Storage TempTstg (v) (mA) (mA) (mW) (ºC) (ºC) Green (GaP) 6 25 100 80 -25 ~ +80 -40 ~ +40 Red (GaP) 6 25 100 80 -25 ~ +80 -40 ~ +40 6 25 100 80 -25 ~ +80 -40 ~ +40 6 25 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 170 -25 ~ +80 -40 ~ +40 Colour Orange (GaAsP/GaP) Yellow (GaAsP/GaP) Ultra Yellow (AlGaInP) Ultra Orange (AlGaInP) Ultra Red (AlGaInP) Ultra Yellow Green Blue (GaN/SiC) * 1/10 Duty Cycle. 0.1 ms Pulse Width Soldering Instructions DIP and Wave Soldering Types Iron Soldering (1.5 mm Iron Tip) Distance Max Soldering from Solder to case Time Temp of Soldering Bath Max Soldering Time Distance from Solder Joint to Case Temp of Soldering Iron ≤ 260 ºC 3S >2mm ≤ 300 ºC 3S >2mm ≤ 260 ºC 5S >4mm ≤ 300 ºC 5S >4mm LEDs Component Disposal Instructions 1. All Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Disclaimer The product information and the selection guides facilitate selection of the nxt LEDs best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the LED(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual LEDs or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119 [email protected] www.cdilsemi.com 52K-9_LEDRev100506D Continental Device India Limited Page 2 of 2