CEL NR3312TG-AZ

RECEIVER
NR3312 Series
InGaAs PIN-PD RECEIVER WITH INTERNAL PRE-AMPLIFIER
FOR 10 Gb/s APPLICATIONS
DESCRIPTION
The NR3312 Series products consist of InGaAs PIN ROSAs (Receiver
Optical Sub-Assembly) with internal pre-amplifiers designed for 10 Gb/s
optical transceivers such as the XENPAK/X2/XFP. These modules are ideal
as receivers for IEEE 10G BASE and SONET OC-192 systems.
FEATURES
• XMD-MSA compliant ROSA
• 10 Gb/s high sensitivity InGaAs PIN-PD
• +3.3 V SiGe transimpedance pre-amplifier
• Minimum receiver sensitivity
Pr = −20 dBm
• Operating case temperature
TC = −5 to +85°C
• Transimpedance
Zt = 2 000 Ω (Single-ended)
• Cut-off frequency
fc = 11 GHz
• With flexible printed circuit
Document No. PL10638EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
2006
NR3312 Series
PACKAGE DIMENSIONS (UNIT: mm)
NR3312TF
φ 7.0±0.1
φ 4.64±0.05
6.6±0.1
OFF-SET
0.17
φ 5.5±0.02
1.2±0.1
4.9
16.4±0.3
(2.51) 2.4±0.1
11.51+0.1
–0.15
OPTICAL
REFERENCE
PLANE
φ 5.6 MAX.
16.2
BOTTOM VIEW
1.0
5–0.79
2.4
2.8
1.3
2.0
13.2
2
Preliminary Data Sheet PL10638EJ01V0DS
3.0
6–0.35
0.27
2.8
2.8
5.6
12– φ 0.15
2–R0.35
Vpd
GND
DATA N
DATA P
GND
VCC
NR3312 Series
NR3312TG
φ 5.0±0.1
0.55±0.03
OPTICAL
REFERENCE
PLANE
1.35
φ 2.99±0.01
1.3
13.6
3.5±0.1
φ 5.5±0.05
φ 5.6 MAX.
16.2
BOTTOM VIEW
1.0
5–0.79
2.4
0.27
2.8
2.8
2.8
1.3
2.0
13.2
Preliminary Data Sheet PL10638EJ01V0DS
5.6
12– φ 0.15
2–R0.35
Vpd
GND
DATA N
DATA P
GND
VCC
6–0.35
8.7
4.05
φ 2.92±0.01
5.15±0.05
OFF-SET
(0.17)
3.0
3
NR3312 Series
NR3312TP
φ 5.0±0.1
φ 2.99±0.01
(12.4)
OPTICAL
REFERENCE
PLANE
5.15±0.05
0.55±0.03
(7.5)
(4.05)
OFF-SET
0.17
φ 3.8±0.02
1.2±0.1
φ 5.5±0.02
φ 5.6 MAX.
16.2
BOTTOM VIEW
1.0
5–0.79
2.4
2.8
1.3
2.0
13.2
4
Preliminary Data Sheet PL10638EJ01V0DS
3.0
6–0.35
0.27
2.8
2.8
5.6
12– φ 0.15
2–R0.35
Vpd
GND
DATA N
DATA P
GND
VCC
NR3312 Series
NR3312TX
φ 7.0±0.1
φ 4.64±0.05
6.6±0.1
OFF-SET
0.17
φ 5.5±0.02
1.2±0.1
4.9
16.4±0.3
(2.51) 2.4±0.1
11.51+0.1
–0.15
OPTICAL
REFERENCE
PLANE
φ 5.6 MAX.
16.2
BOTTOM VIEW
1.0
5–0.79
2.4
2.8
1.3
2.0
13.2
Preliminary Data Sheet PL10638EJ01V0DS
Vpd
GND
DATA N
DATA P
GND
VCC
6–0.35
0.27
2.8
2.8
5.6
12– φ 0.15
2–R0.35
3.0
5
NR3312 Series
BLOCK DIAGRAM
Flexible Printed Circuit
Vpd
0.1µF
100 pF
GND
GND
GND
PD
DATA P
TIA
DATA N
0.1µF
GND
100 pF
GND
VCC
6
Preliminary Data Sheet PL10638EJ01V0DS
NR3312 Series
ORDERING INFORMATION
Part Number
NR3312TF-AZ
Receptacle Type
Note
SC, Zirconia
Differential output with flexible
PCB
NR3312TG-AZ
LC, Electrically Isolated
Differential output with flexible
PCB
NR3312TP-AZ
LC, Zirconia
Differential output with flexible
PCB
NR3312TX-AZ
SC, Metal
Differential output with flexible
PCB
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
PIN-PD Reverse Voltage
VR
10
V
PIN-PD Reverse Current
IR
10
mA
IC Supply Voltage
VCC
−0.7 to +5.0
V
Operating Case Temperature
TC
−5 to +85
°C
Storage Temperature
Tstg
−40 to +85
°C
Maximum AOP Input
Pin
+5
dBm
Tsld
350 (3 sec.)
°C
(ER < 5.4 dB (1.1 A/W))
Lead Soldering Temperature
(Flexible Printed Circuit)
RECOMMENDED OPERATING CONDITION
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
PIN-PD Reverse Voltage
VR
3.1
3.3
3.5
V
IC Supply Voltage
VCC
+3.1
+3.3
+3.5
V
Operating Case Temperature
TC
−5
+25
+85
°C
ELECTRO-OPTICAL CHARACTERISTICS (λ = 1 310 nm/1 550 nm, unless otherwise specified)
Parameter
Symbol
Sensitivity
S
Transimpedance
Zt
Conditions
RL = 50 Ω, Pin = −17 dBm,
MIN.
TYP.
MAX.
Unit
0.75
0.9
800
2 000
3 000
Ω
100
125
200
mVpp
7
11
A/W
Single-ended
Maximum Output Voltage Swing
Cut-off Frequency
Vclip
fC
Single-ended
RL = 50 Ω, Pin = −17 dBm,
GHz
−3 dB from 1 GHz
Minimum Receiver Sensitivity
Pr
9.95 Gb/s, BER = 10− ,
−20
12
PRBS = 2 −1, ER = 13 dB, NRZ,
−17
dBm
31
Overload
PO
IC Supply Current
ICC
λ = 1 550 nm
Preliminary Data Sheet PL10638EJ01V0DS
+0.5
+3
40
55
dBm
75
mA
7
NR3312 Series
Optical Return Loss
8
ORL
Preliminary Data Sheet PL10638EJ01V0DS
−27
dB
NR3312 Series
REFERENCE
Document Name
*1
Opto-Electronics Devices Pamphlet
Document No.
PX10160E
*1 Published by the former NEC Compound Semiconductor Devices, Ltd.
Preliminary Data Sheet PL10638EJ01V0DS
9
NR3312 Series
• The information in this document is current as of September, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
10
Preliminary Data Sheet PL10638EJ01V0DS
NR3312 Series
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution
Optical Fiber
A glass-fiber is attached on the product. Handle with care.
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.
For further information, please contact
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: [email protected]
Hong Kong Head Office TEL: +852-3107-7303
FAX: +852-3107-7309
Taipei Branch Office
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office
TEL: +82-2-558-2120
FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH
http://www.eu.necel.com/
TEL: +49-211-6503-0
FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500
FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
0604
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.