CED703AL/CEU703AL N-Channel Enhancement Mode Field Effect Transistor FEATURES 30V, 40A, RDS(ON) = 19mΩ @VGS = 10V. RDS(ON) = 32mΩ @VGS = 4.5V. Super high dense cell design for extremely low RDS(ON). High power and current handing capability. D Lead free product is acquired. TO-251 & TO-252 package. G D G S CEU SERIES TO-252(D-PAK) ABSOLUTE MAXIMUM RATINGS Parameter G D S CED SERIES TO-251(I-PAK) Tc = 25 C unless otherwise noted Symbol Limit 30 Units V VGS ±20 V ID 40 A IDM 120 A 50 W Drain-Source Voltage VDS Gate-Source Voltage Drain Current-Continuous Drain Current-Pulsed S a Maximum Power Dissipation @ TC = 25 C PD - Derate above 25 C Operating and Store Temperature Range 0.3 W/ C TJ,Tstg -65 to 175 C Thermal Characteristics Symbol Limit Units Thermal Resistance, Junction-to-Case Parameter RθJC 3 C/W Thermal Resistance, Junction-to-Ambient RθJA 50 C/W Specification and data are subject to change without notice . 1 Rev 2. 2007.Jan http://www.cetsemi.com CED703AL/CEU703AL Electrical Characteristics Parameter Tc = 25 C unless otherwise noted Symbol Test Condition Min Drain-Source Breakdown Voltage BVDSS VGS = 0V, ID = 250µA 30 Zero Gate Voltage Drain Current IDSS Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse Typ Max Units VDS = 24V, VGS = 0V 1 µA IGSSF VGS = 20V, VDS = 0V 100 nA IGSSR VGS = -20V, VDS = 0V -100 nA Off Characteristics V On Characteristics b Gate Threshold Voltage VGS(th) Static Drain-Source RDS(on) On-Resistance Forwand Transconductance Dynamic Characteristics gFS VGS = VDS, ID = 250µA 3 V VGS = 10V, ID = 25A 1 15 19 mΩ VGS = 4.5V, ID = 10A 23 32 mΩ VDS = 10V, ID = 25A 30 S 1345 pF 275 pF 85 pF c Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VDS = 25V, VGS = 0V, f = 1.0 MHz Switching Characteristics c Turn-On Delay Time td(on) Turn-On Rise Time tr Turn-Off Delay Time td(off) VDD = 15V, ID = 25A, VGS = 10V, RGEN = 24Ω 19 38 ns 4.5 9 ns 85 170 ns 34 Turn-On Fall Time tf 17 Total Gate Charge Qg 10.2 nC Gate-Source Charge Qgs 3.2 nC Gate-Drain Charge Qgd 4.2 nC VDS = 24V, ID = 25A, VGS = 5V ns Drain-Source Diode Characteristics and Maximun Ratings Drain-Source Diode Forward Current IS Drain-Source Diode Forward Voltage b VSD VGS = 0V, IS = 25A Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature. b.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. c.Guaranteed by design, not subject to production testing. 2 40 A 1.3 V 6 CED703AL/CEU703AL 80 VGS=10,8,7,6,5V 30 25 C ID, Drain Current (A) ID, Drain Current (A) 40 VGS=4V 20 10 VGS=3V 0 0.0 0.5 1.0 1.5 2.5 3.0 2 3 4 5 6 Figure 1. Output Characteristics Figure 2. Transfer Characteristics RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) 900 600 Coss 300 Crss 0 5 10 15 20 25 2.2 1.9 ID=25A VGS=10V 1.6 1.3 1.0 0.7 0.4 -100 -50 0 50 100 150 200 VDS, Drain-to-Source Voltage (V) TJ, Junction Temperature( C) Figure 3. Capacitance Figure 4. On-Resistance Variation with Temperature VDS=VGS ID=250µA IS, Source-drain current (A) C, Capacitance (pF) VTH, Normalized Gate-Source Threshold Voltage 1 VGS, Gate-to-Source Voltage (V) Ciss 1.1 1.0 0.9 0.8 0.7 0.6 -50 0 -55 C VDS, Drain-to-Source Voltage (V) 1200 1.2 20 TJ=125 C 2.0 1500 1.3 40 0 1800 0 60 -25 0 25 50 75 100 125 150 VGS=0V 10 2 10 1 10 0 0.2 0.6 1.0 1.4 1.8 2.2 TJ, Junction Temperature( C) VSD, Body Diode Forward Voltage (V) Figure 5. Gate Threshold Variation with Temperature Figure 6. Body Diode Forward Voltage Variation with Source Current 3 5 VDS=10V ID=25A 4 ID, Drain Current (A) VGS, Gate to Source Voltage (V) CED703AL/CEU703AL 3 2 1 0 0 3 6 9 12 10 2 RDS(ON)Limit 100ms 1ms 10ms 10 1 10 0 DC 6 TC=25 C TJ=175 C Single Pulse 10 -1 10 0 10 1 Qg, Total Gate Charge (nC) VDS, Drain-Source Voltage (V) Figure 7. Gate Charge Figure 8. Maximum Safe Operating Area VDD t on RL V IN D VGS RGEN toff tr td(on) td(off) tf 90% 90% VOUT VOUT 10% INVERTED 10% G 90% S VIN 50% 50% 10% PULSE WIDTH Figure 10. Switching Waveforms r(t),Normalized Effective Transient Thermal Impedance Figure 9. Switching Test Circuit 10 0 D=0.5 0.2 10 0.1 -1 PDM 0.05 t1 0.02 0.01 Single Pulse 10 -2 10 -2 t2 1. RθJA (t)=r (t) * RθJA 2. RθJA=See Datasheet 3. TJM-TA = P* RθJA (t) 4. Duty Cycle, D=t1/t2 10 -1 10 0 10 1 10 2 Square Wave Pulse Duration (msec) Figure 11. Normalized Thermal Transient Impedance Curve 4 10 3 10 4