CS4932X/CS49330 Part Matrix vs. Code Matrix for AVR/Outboard Decoder-based Applications 1. CS4932X/CS49330: AVR/OUTBOARD DECODER SUBFAMILY 2. AVR/OUTBOARD DECODER-BASED STANDARD RELEASE APPLICATION CODES For AVR codes, all compressed inputs are expected to be packed according to IEC61937 while PCM is 2.1 Application Code Logo, Name, delivered according to IEC60958 in I2S or LeftDescription, and Notes Justified digital audio format. DTS CDs are one • exception as they deliver compressed data according to IEC60958. AAC - Multichannel MPEG-2 AAC (LC, ADTS) decoder with 5.1 channel output. Data delivery is: I2S or Left-Justified Compressed Digital audio • according to the IEC61937 specification or PCM according to the IEC60958 specification and is typically delivered from a S/PDIF receiver. Expected CLKIN = 12.288 MHz (Oscillator Value) DSPCLK = Refer to AN163 (Application Code Dependent) Standard Hardware Configuration: OUTPUTA1 (DSP is Slave to MCLK, DSP Masters SCLK and LRCLK) Refer to AN163 and its appendices for how to control AVR/Outboard Decoder-based Standard Release Application Codes that run on the CS4932X Family and/or the CS49330. • AAS_PROL2 - Stereo MPEG-2 AAC (LC, ADTS) with Dolby Pro Logic II decoder offering up to a 5.1 channel output. [ ® ACEQ - Dolby Digital™ with Dolby Pro Logic decoder and PCM input support. This code features a 5 Channel, 5 Band Graphic Equalizer. ® • AC3 - Dolby Digital™ with Dolby Pro Logic decoder and PCM input support. This code features +/-12dB Tone Control. ® The designer/manufacture should be aware that Note: Tone Control is implemented as individual bass obtaining and/or evaluation of any/all application and treble control on the Left, Right, and Center output channels. codes requires signing of a Crystal Ware Software Licensing Agreement (CWSEA). Additionally, a • AC3_CES - Dolby Digital™ with Dolby Pro Crystal Ware Licensing Agreement (CWLA) must Logic decoder and PCM input support. This be signed before any/all application codes may be code features Crystal Extra Surround™ which used in any production-level design. Please contact enables a 6.1 or 7.1 channel output. your Cirrus Logic Sales Representative or FAE in ® order to obtain the necessary contracts, application codes and application notes. P.O. Box 17847, Austin, Texas 78760 (512) 445 7222 FAX: (512) 445 7581 http://www.cirrus.com Copyright Cirrus Logic, Inc. 2001 (All Rights Reserved) MAY ‘01 DS339AM3 1 CS4932X/CS49330 • AC3_PROL2 - Dolby Digital with Dolby Pro Logic II™ decoder and PCM input support. ] • ® AC3_PL2_CES - Dolby Digital with Dolby Pro Logic II decoder and PCM input support. This code features Crystal Extra Surround™ which enables a 6.1 or 7.1 channel output. ] ® • AC3_PL2_REEQ - Dolby Digital with Dolby Pro Logic II decoder and PCM input support. This code features user-programmable 2nd Order IIR Biquads which are capable of offering Re-EQ™ functionality. Re-EQ coefficients are NOT supplied by Cirrus Logic, Inc. Use of Re-EQ technology requires a license from the THX Division of Lucasfilm, Ltd. ] ® Note: The three 2nd order IIR Biquads are available on the Left, Right, and Center output channels only. Contacting Cirrus Logic Support For a complete listing of Direct Sales, Distributor, and Sales Representative contacts, visit the Cirrus Logic web site at: http://www.cirrus.com/corporate/contacts/ Dolby Digital, AC-3, Dolby Pro Logic, Dolby Pro Logic II, Dolby Surround, Surround EX, Virtual Dolby Digital and the “AAC” logo are trademarks and the “Dolby Digital” logo, “Dolby Digital with Pro Logic II” logo, “Dolby” and the double-”D” symbol are registered trademarks of Dolby Laboratories Licensing Corporation. DTS, DTS Digital Surround, DTS-ES Extended Surround, DTS Neo:6, and DTS Virtual 5.1 are trademarks and the “DTS”, “DTS-ES”, “DTS Virtual 5.1” logos are registered trademarks of the Digital Theater Systems Corporation. The “MPEG Logo” is a registered trademark of Philips Electronics N.V. Home THX Cinema and THX are registered trademarks of Lucasfilm Ltd. Surround EX is a jointly developed technology of THX and Dolby Labs, Inc. AAC (Advanced Audio Coding) is an “MPEG-2-standard-based” digital audio compression algorithm (offering up 5.1 discrete decoded channels for this implementation) collaboratively developed by AT&T, the Fraunhofer Institute, Dolby Laboratories, and the Sony Corporation. In regards to the MP3 capable functionality of the CS49300 Family DSP (via downloading of mp3_493xxx_vv.ld and mp3e_493xxx_vv.ld application codes) the following statements are applicable: “Supply of this product conveys a license for personal, private and non-commercial use. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and THOMSON Multimedia.” MLP and Meridian Lossless Packing are registered trademarks of Meridian Audio Ltd. Harman VMAx is a registered trademark of Harman International. The Logic 7 logo and Logic 7 are registered trademarks of Lexicon. SRS CircleSurround, and SRS TruSurround are trademarks of SRS Labs, Inc. The HDCD logo, HDCD, High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD technology provided under license from Pacific Microsonics, Inc. This product’s software is covered by one or more of the following in theUnited States: 5,479,168; 5,638,074; 5,640,161; 5,872,531; 5,808,574; 5,838,274; 5,854,600; 5,864,311; and in Australia: 669114; with other patents pending. Intel is a registered trademark of Intel Corporation. Motorola is a registered trademark of Motorola, Inc. I2C is a registered trademark of Philips Semiconductor. Purchase of I2C Components of Cirrus Logic, Inc., or one of its sublicensed Associated Companies conveys a license under the Philips I2C Patent Rights to use those components in a standard I2C system. “Crystal Extra Surround” is a trademark and “Crystal” and “Cirrus Logic” are registered trademarks of Cirrus Logic, Inc. All other names are trademarks, registered trademarks, or service marks of their respective companies. Cirrus Logic, Inc. does not dictate how Crystal Extra Surround functionality is to be used in an end-system, nor does it assume any responsibility for it’s use. Use of any application code that contains Crystal Extra Surround functionality implies that the designer, and the company he/she works for, assumes all liability and Cirrus Logic , Inc. will in no way be held responsible for it’s misuse. Use of the Crystal Extra Surround code does NOT give the end system the right to use ANY of th e following terms or their associated logos: “THX®”, “THX Surround EX™”, “Surround EX™”, “Dolby Digital Surround EX™”, or “DTS-ES™ Extended Surround”. Preliminary product information describes products which are in production, but for which full characterization data is not yetavailable. Advance product information describes products which are in development and subject to development changes. Cirrus Logic, Inc. has made best efforts to ensure that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided “AS IS” without warranty of any kind (express or implied). No responsibility is assumed by Cirrus Logic, Inc. for the use of this information, nor for infringements of patents or other rights of third parties. This document is the property of Cirrus Logic, Inc. and implies no license under patents, copyrights, trademarks, or trade secrets. No part of this publication may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photographic, or otherwise) without the prior written consent of Cirrus Logic, Inc. Items from any Cirrus Logic website or disk may be printed for use by the user. However, no part of the printout or electronic files may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photographic, or otherwise) without the prior written consent of Cirrus Logic, Inc. The names of products of Cirrus Logic, Inc. or other vendors and suppliers appearing in this document may be trademarks or service marks of their respective owners which may be registered in some jurisdictions. A list of Cirrus Logic, In c. trademarks and service marks can be found at http://www.cirrus.com. 2 DS339AM3 CS4932X/CS49330 • AC3D - Virtual Dolby Digital™ (Dolby Digital/Dolby Pro Logic decoder with PCM input support + Dolby Virtualizer Module). Offers ability to have virtualized 5.1 channel output using only 2 speakers. The virtualizer can be disabled, offering a full 5.1 channel output if desired. • CAR - Crystal Automotive DSP software is a multi-channel PCM post processor capable of accepting up to 8 PCM audio input channels. Audio is processed in 8 blocks using configurable audio processing modules. Each block can be configured with one of the modules or bypassed. The individual blocks are highly configurable to allow each to act as a: Fader, Dynamic Range Compressor (DRC), Filter, Mixer, or Trim. Fs of PCM input must be 48kHz, 44.1kHz or 32kHz. • CS - SRS CircleSurround-5.1 is a PCM Enhancement algorithm which accepts a 2 channel input and outputs up to 5.1 discrete channels. This code also offers +/- 12dB of Tone Control. Fs of PCM input must be 48kHz, 44.1kHz or 32kHz. ® • AC3I - Internal Boot Assist (IBA) program for loading Dolby Digital/Dolby Pro Logic decoder (with PCM input support) code from internal ROM. Included in the cost of the CS493253-CL or CS493263-CL. ® Note: Please refer to AN163 for more detail regarding the differences between IBA and Full Download codes. • AC3R - Virtual Dolby Digital using SRS TruSurround™ (Dolby Digital and Dolby Pro Logic decoder with PCM input support + SRS TruSurround Digital 5.1 Channel Virtualizer Module). Offers ability to have virtualized 5.1 channel output using only 2 speakers. The virtualizer can be disabled, offering a full 5.1 channel output if desired. ® • AC3X - Virtual Dolby Digital using VMAx™ Virtual Theater (Dolby Digital/Dolby Pro Logic decoder with PCM input support + VMAx Virtualizer Module). Offers ability to have virtualized 5.1 channel output using only 2 speakers. The virtualizer can be disabled, offering a full 5.1 channel output if desired. ® ® Note: Tone Control is implemented as individual bass and treble control on the Left, Right, and Center output channels. • CS2 - SRS CircleSurround II with Focus™ is the next generation PCM Enhancement algorithm from SRS Labs which accepts a 2 channel input and outputs up to 6.1 discrete channels. This code also offers +/- 12dB of Tone Control. Fs of PCM input must be 48kHz, 44.1kHz or 32kHz. Note: Tone Control is implemented as individual bass and treble control on the Left, Right, and Center output channels. • DTEQ - DTS Digital Surround™ decoder with Dolby Pro Logic decoder (for when input is 2 channel DTS). This code features a 5 Channel, 5 Band Graphic Equalizer. ® DS339AM3 3 CS4932X/CS49330 • DTS - DTS Digital Surround™ decoder with Dolby Pro Logic decoder. This code features +/-12dB Tone Control. • ® ® Note: Tone Control is implemented as individual bass and treble control on the Left, Right, and Center output channels. • DTS_6DOT1 - DTS-ES Extended Surround™ Note: Please refer to AN163 for more detail regarding the differences between IBA and Full Download codes. • DTSR - DTS Virtual 5.1™ using SRS Discrete 6.1 and Matrix 6.1 decoder. • DTSI - Internal Boot Assist (IBA) program for loading DTS Digital Surround code from internal ROM TruSurround (DTS Digital Surround decoder + SRS TruSurround Digital 5.1 Channel Virtualizer Module). Offers ability to have virtualized 5.1 channel output using only 2 speakers. The virtualizer can be disabled, offering a full 5.1 channel output if desired. DTS_CES - DTS Digital Surround™ decoder with Dolby Pro Logic decoder. This code features Crystal Extra Surround™ which enables a 6.1 or 7.1 channel output. ® ® • Surround™ DTS_PL2 - DTS Digital with Dolby Pro Logic II decoder. ® • • DPP - Crystal Digital Post-Processor 5.1 Channel Post-Processor features Tone Control, Parametric EQ, and dual-precision bass management. This code accepts a 5.1 channel input to the CS493302-CL from the output of a CS4932x Family DSP. [ decoder ® DTS_PL2_REEQ - DTS Digital Surround™ decoder with Dolby Pro Logic II decoder. This code features user-programmable 2nd Order IIR Biquads which are capable of offering ReEQ™ functionality. Re-EQ coefficients are NOT supplied by Cirrus Logic, Inc. Use of ReEQ technology requires a license from the THX Division of Lucasfilm, Ltd. ® 4 DVDA_BASS_MGR - DVD Audio Bass Manager application code is capable performing advanced bass management for 2 channel 192kHz PCM audio data or 6 channel 96kHz PCM audio data. This code is designed for an AVR that is “SACD Multichannel or DVD Audio Ready” via high performance (192kHz) A/Ds. DTS_NEO6 - DTS Neo:6™ PCM Processing Enhancement which accepts a 2 channel input and outputs up to 6.1 discrete channels in either a Music or Cinema mode. Fs of PCM input must be 48kHz, 44.1kHz or 32kHz. Neo:6 • • [ ® Note: Tone Control includes basic bass and treble control for each full bandwidth channel. The parametric EQ can not be changed after kickstart. Delays are all channel. • DPP8 - Crystal Digital Post-Processor 7.1 Channel Post-Processor features Tone Control, Parametric EQ, and dual-precision bass management. This code accepts a 7.1 channel input to the CS493302-CL from the output of a CS4932x Family DSP. DS339AM3 CS4932X/CS49330 Note: Tone Control includes basic bass and treble control for each full bandwidth channel. The parametric EQ can not be changed after kickstart. Delays are all channel. • EFF - (a.k.a. C.O.S. - Crystal Original Sound) Reverberative and delay effects code for stereo to multichannel effects processing and +/-12dB Tone Control. This code allows for designers to generate such DSP modes as: Concert Hall, Theater, Jazz Club, etc. Note: Tone Control is implemented as individual bass and treble control on the Left, Right, and Center output channels. There is an output mixer for each channel allowing for multiple speaker configuration settings. However, conventional downmixing is not applicable in the effects code. • EFF_REEQ - Crystal Original Sound with +/12dB Tone Control in addition to userprogrammable 2nd Order IIR Biquads which are capable of offering Re-EQ™ functionality. Re-EQ coefficients are NOT supplied by Cirrus Logic, Inc. Use of Re-EQ technology requires a license from the THX Division of Lucasfilm, Ltd. • Note: Autodetection for HDCD is a two step process, please see AN163D for details.The HDCD code is capable of accepting and autodetection HDCD and non-HDCD encoded PCM stereo inputs with an Fs from 32 kHz to 96 kHz. HDCD processing is only available for input streams 48kHz and lower. The HDCD is also capable of upsampling 32 kHz to 64 kHz, 44.1 kHz to 88.2 kHz, and 48kHz to 96kHz. • LG7 - Logic 5™ (previously called “Logic 7”) is a PCM Enhancement algorithm created by Lexicon, a Harman International Companym which accepts a 2 channel input and outputs up to 5.1 discrete channels. Fs of PCM input must be 48kHz, 44.1kHz or 32kHz.. • Note: Tone Control is implemented as individual bass and treble control on the Left, Right, and Center output channels. Re-EQ is implemented on only the L, C, and R channels. There is an output mixer for each channel allowing for multiple speaker configuration settings. However, conventional downmixing is not applicable in the effects code. • EFFI - Internal Boot Assist (IBA) program for loading Crystal Original Surround code Note: There is an output mixer for each channel allowing for multiple speaker configuration settings. However, conventional downmixing is not applicable in the effects code. Please refer to AN163 for more detail regarding the differences between IBA and Full Download codes. DS339AM3 HDC - Pacific Microsonics HDCD™ PCM Enhancement offers upsampling and resolution enhancement. LG7_7DOT1 - Logic 7™ is the next generation PCM Enhancement algorithm from Lexicon, a Harman International Company, which accepts a 2 channel input and outputs up to 7.1 discrete channels. Fs of PCM input must be 96kHz, 88.2kHz, 64kHz, 48kHz, 44.1kHz or 32kHz.. ® • MPEQ - MPEG Multichannel with Dolby Pro Logic decoder. This code features a 5 Channel, 5 Band Parametric Equalizer ® Note: The MPEQ code ONLY supports the following MPEG streams: MPEG-2, Layer 2 (with and without extension). MPEG-2 Low Sampling Frequencies are currently not supported. Please refer to AN163 for more details on stream support. 5 CS4932X/CS49330 • MPG - MPEG Multichannel with Dolby Pro Logic decoder. This code features +/-12dB Tone Control. • MPGR - MPEG + SRS TruSurround (MPEG Multichannel decoder + SRS TruSurround Virtualizer Module) ® ® Note: The MPG code ONLY supports the following MPEG streams: MPEG-2, Layer 2 (with and without extension). MPEG-2 Low Sampling Frequencies are currently not supported. Please refer to AN163 for more details on stream support. Tone Control is implemented as individual bass and treble control on the Left, Right, and Center output channels. • MPG_CES - MPEG Multichannel with Dolby Pro Logic decoder. This code features Crystal Extra Surround™ which enables a 6.1 or 7.1 channel output. ® Note: The MPG_CES code ONLY supports the following MPEG streams: MPEG-2, Layer 2 (with and without extension). MPEG-2 Low Sampling Frequencies are currently not supported. Please refer to AN163 for more details on stream support. • Note: The MPG code ONLY supports the following MPEG streams: MPEG-2, Layer 2 (with and without extension). MPEG-2 Low Sampling Frequencies currently not supported. Please refer to AN163 for more details on stream support. • MP3 - MPEG-1, Layer 3 (MP3) Decoder Note: Due to the fact that the Pc value of 0x5 in the IEC61937 specifcation pertains to more than one type of MPEG stream type, autodetection of IEC61937-packed MP3 data is a two step process. Please refer to AN163 for details. Please refer to the legal section for more information about the use of this application code. • PDF - Dolby Pro Logic Double Sampling Frequency Decoder (Fs = 64 kHz, 88.2 kHz, 96 kHz) and PCM Upsampler. MPG_PL2 - MPEG Multichannel with Dolby Pro Logic II decoder. ® [ ® Note: The MPG_PL2 code ONLY supports the following MPEG streams: MPEG-2, Layer 2 (with and without extension). MPEG-2 Low Sampling Frequencies are currently not supported. Please refer to AN163 for more details on stream support. ® Note: The PDF code is capable of accepting 32 kHz to 96 kHz PCM stereo input and can perform a Pro Logic decode. The PDF code can also upsample 32 kHz to 64 kHz, 44.1 kHz to 88.2 kHz, and 48kHz to 96kHz in addition to perform a Dolby Pro Logic decode of the upsampled PCM. • PL2_2FS - Dolby Pro Logic II Double Sampling Frequency Decoder (Fs = 64 kHz, 88.2 kHz, 96 kHz) and PCM Upsampler. [ ® Note: The PL2_2FS code is capable of accepting 32 kHz to 96 kHz PCM stereo input and can perform a Pro Logic II decode. The PL2_2FS code can also upsample 32 kHz to 64 kHz, 44.1 kHz to 88.2 kHz, and 48kHz to 96kHz in addition to perform a Dolby Pro Logic II decode of the upsampled PCM. 6 DS339AM3 CS4932X/CS49330 • THX - Home THX Cinema™ 5.1 Channel PostProcessor offers: Re-Eq™, Timbre Matching™, Adaptive Decorrelation™ THX Bass Peak Limiter™, Loudspeaker Position Time Synchronization™ (all-channel delays), in addition to tone control and parametric equalization. Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel (Sb). The parametric EQ can not be changed after kickstart. Delays are all channel. Please refer to AN163H for more information about the Home THX Cinema 5.1 Channel Post-Processor code. • THX8 - Home THX Cinema™ 7.1 Channel Post-Processor offers: Re-Eq™, Timbre Matching™, Adaptive Decorrelation™ THX Bass Peak Limiter™, Loudspeaker Position Time Synchronization™ (all-channel delays), in addition to tone control and parametric equalization. THX8 differs from the THX code in the sense that it can post process multichannel sources that have more than 5.1 discrete channels, such as DTS-ES Discrete 6.1 streams. Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel (Sb). The parametric EQ can not be changed after kickstart. Delays are all channel. Please refer to AN163O for more information about the Home THX Cinema 7.1 Channel Post-Processor code. DS339AM3 • TEX - THX Surround EX™ 5.1 Channel PostProcessor offers all of the post-processing features of the THX code, however TEX also offers the Surround EX module. The Surround EX module performs a matrix decode on Ls and Rs, using a Dolby Pro Logic decoder in 3 Channel Stereo mode, to create an additional back surround channel. This surround back channel is then copied to the output channels of Sbl and Sbr in order to give a 7.1 channel output. Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel. The parametric EQ can not be changed after kickstart. Delays are all channel. Surround EX decoding should only be enabled when material is Dolby Surround EX encoded. Please refer to AN163H for more information about the THX Surround EX 5.1 Channel Post-Processor code. • TEXO - THX Surround EX™ 5.1 Channel Post-Processor offers all of the post-processing features of the TEX code, however TEXO also offers extended all channel delays (up to 105ms on all channels). Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel. The parametric EQ can not be changed after kickstart. Delays are all channel. A 1MBit External SRAM (70nS) is required to be connect to the CS49330 in order for this code to function. Surround EX decoding should only be enabled when material is Dolby Surround EX encoded. Please refer to AN163H for more information about the THX Surround EX 5.1 Channel Post-Processor code. 7 CS4932X/CS49330 • TEXO_2MB - THX Surround EX™ 5.1 Channel Post-Processor offers all of the postprocessing features of the TEX code, however TEXO_2MB also offers extended all channel delays (up to 221ms on all channels). • TEXO8 - THX Surround EX™ 7.1 Channel Post-Processor offers all of the post-processing features of the TEX code, however TEXO8 also offers extended all channel delays (up to 105ms on all channels). Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel. The parametric EQ can not be changed after kickstart. Delays are all channel. A 2MBit External SRAM (70nS) is required to be connect to the CS49330 in order for this code to function. Surround EX decoding should only be enabled when material is Dolby Surround EX encoded. Please refer to AN163H for more information about the THX Surround EX 5.1 Channel Post-Processor code. • TEX8 - THX Surround EX™ 7.1 Channel Post- Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel. The parametric EQ can not be changed after kickstart. Delays are all channel. A 1MBit External SRAM (70nS) is required to be connect to the CS49330 in order for this code to function. Surround EX decoding should only be enabled when material is Dolby Surround EX encoded. Please refer to AN163O for more information about the THX Surround EX 7.1 Channel Post-Processor code. • TEXO8_2MB - THX Surround EX™ 7.1 Processor offers all of the post-processing features of the THX8 code, however TEX also offers the Surround EX module. The Surround EX module performs a matrix decode on Ls and Rs, using a Dolby Pro Logic decoder in 3 Channel Stereo mode, to create an additional back surround channel. This surround back channel is then copied to the output channels of Sbl and Sbr in order to give a 7.1 channel output. TEX8 differs from the TEX code in the sense that it can post process multichannel sources that have more than 5.1 discrete channels, such as DTS-ES Discrete 6.1 streams. Channel Post-Processor offers all of the postprocessing features of the TEX code, however TEXO8_2MB also offers extended all channel delays (up to 221ms on all channels). Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel. The parametric EQ can not be changed after kickstart. Delays are all channel. A 2MBit External SRAM (70nS) is required to be connect to the CS49330 in order for this code to function. Surround EX decoding should only be enabled when material is Dolby Surround EX encoded. Please refer to AN163O for more information about the THX Surround EX 7.1 Channel Post-Processor code. Note: The tone control includes basic bass and treble control for each full bandwidth channel, including Surround Back channel. The parametric EQ can not be changed after kickstart. Delays are all channel. Surround EX decoding should only be enabled when material is Dolby Surround EX encoded. Please refer to AN163O for more information about THX Surround EX 7.1 Channel Post-Processor code. 8 DS339AM3 DS339AM3 Part(ROMID) ACEQ AC3 AC3_CES AC3_PROL2 AC3_PL2_CES AC3_PL2_REEQ AC3D AC3I AC3R AC3X CAR CS CS2 CS49325(3) Y Y Y Y Y Y Y Y Y Y Y Y Y Dolby Digital (with or without Pro Logic II) and Crystal Ware CS49326(3) Y Y Y Y Y Y Y Y Y Y Y Y Y Dolby Digital (with or without Pro Logic II), DTS and Crystal Ware Y Y Y Y Y Y Y Y Y CS49329(2) AAC AAS_PROL2 Y Y CS49330(2) Y Y Y Y Y Y DPP DPP8 Licensing Required to Receive Samples/Production Quantities of IC Dolby Digital (with or without Pro Logic II), DTS, AAC and Crystal Ware Y Y Crystal Ware Table 1. CS4932X/CS49330: AVR/Outboard Decoder Application Subfamily and Associated AVR/Outboard Decoder-based Application Codes available through the Crystal Ware Licensing Program Part(ROMID) DTEQ DTS DTS_6DOT1 DTS_CES DTS_NEO6 DTS_PL2 DTS_PL2_REEQ DTSI DTSR DVDA_BASS_MGR EFF EFF_REEQ EFFI HDC Y Y Y Y Y Dolby Digital (with or without Pro Logic II) Y Y Y Y Y Dolby Digital (with or without Pro Logic II) and DTS CS49325(3) CS49326(3) Y Y Y Y Y Y Y CS49329(2) Y Y Y Y Y Y Y Y Y Y CS49330(2) Licensing Required to Receive Samples/Production Quantities of IC Y Y Y Y Dolby Digital (with or without Pro Logic II), DTS, and AAC Y Y Y Y License-Free Part Table 2. CS4932X/CS49330: AVR/Outboard Decoder Application Subfamily and Associated AVR/Outboard Decoder-based Application Codes available through the Crystal Ware Licensing Program (Continued) Part(ROMID) LG7 LG7_7DOT1 MPEQ MPG_CES MPG_PL2 MPGR MP3 PDF PL2_2FS Y Y Y Y Y Y Y Y Y Y Dolby Digital (with or without Pro Logic II) CS49326(3) Y Y Y Y Y Y Y Y Y Y Dolby Digital (with or without Pro Logic II) and DTS Y Y CS49329(2) Y Y Y Y Y Y Y Y CS49330(2) Y Y Y Y Y Y Y Y TEX TEX8 TEXO TEXO_2MB TEXO8 TEXO8_2MB THX THX8 Licensing Required to Receive Samples/Production Quantities of IC Dolby Digital (with or without Pro Logic II), DTS, and AAC Y Y Y Y Y Y Y Y License-Free Part Table 3. CS4932X/CS49330: AVR/Outboard Decoder Application Subfamily and Associated AVR/Outboard Decoder-based Application Codes available through the Crystal Ware Licensing Program (Continued) 9 CS4932X/CS49330 MPG CS49325(3) 10 Code Name Required Licensing (in addition to signing of Crystal Ware Licensing Agreements) Documentation Required in Addition to CS49300 Data Sheet and AN163 Playable Input AAC Dolby N/A AAS_PL2 Dolby AN163M Tone Control Re-EQ/ Graphic EQ/ Parametric EQ Dual-Precision Bass Manager Karaoke Delays Contains Crystal Extra Surround which offers 6.1/7.1 channel matrix decoded output N/A No No Yes No No. Delays only available when in Pro Logic mode No Yes 32K x 8, 70ns N/A No No Yes No Yes No No Yes Capable, no mixing Yes No No Yes Capable, no mixing Yes No No Yes Capable, no mixing Yes Yes No Yes Capable, no mixing Yes No No Yes Yes No Autodetection Dolby Pro Logic or Dolby Pro Logic II Virtualizer Module Downmix Dualzone Output Pink Noise Automatic Fs/ Coefficient Change for Deemphasis (for 32kHz to 48kHz) AAC (ADTS, LC) 5.1 Channel Normal Pro Logic N/A Yes Yes No AAC (ADTS, LC) 2 Channel Normal Pro Logic II N/A Yes Yes No ACEQ Dolby AN163K AC3 + PCM Normal Pro Logic N/A Yes Yes Yes Automatic No 5 Channel, 5-Band Graphic AC3 Dolby N/A AC3 + PCM Normal Pro Logic N/A Yes Yes Yes Automatic Yes No AC3_CES AC3_PROL2 AC3_PL2_CES AC3_PL2_REEQ AC3D Dolby AN163R Dolby AN163M Dolby AN163M, AN163R Dolby AN163M, AC3_PL2_REEQ Release Notes Dolby AN163A AC3 + PCM AC3 + PCM AC3 + PCM AC3 + PCM Normal Normal Normal Normal Dolby AC3R Dolby & SRS Labs AN163F AC3 + PCM AC3X Dolby & Harman AN163B AC3 + PCM CAR Only Crystal Ware AN160 M/C + Stereo PCM None SRS Labs CS2 SRS Labs DPP Only Crystal Ware DPP8 Only Crystal Ware AN163C AC3 + PCM Normal AC3I CS N/A AC3 + PCM PCM AN163T PCM AN163G M/C + Stereo PCM AN163Q M/C + Stereo PCM Normal Pro Logic Pro Logic II Pro Logic II N/A N/A N/A Pro Logic II N/A Pro Logic Dolby Virtualizer No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Automatic Automatic Automatic Automatic No No No No No Yes Capable, no mixing No Re-EQ (only on L, C, R Channels) Yes Capable, no mixing Yes No No Yes Capable, no mixing Yes No No Yes Capable, no mixing Yes No No No Pro Logic Yes Yes Yes Automatic No No Yes Yes No No Pro Logic Harman VMAx Yes Yes Yes Automatic No No Yes Capable, no mixing Yes No No No N/A No No No N/A Yes Multiband Parametric Yes No Yes No No No Yes, Pass-through No Automatic Yes No Yes No Yes No No No Yes, Pass-through No Automatic Yes No Yes No Yes No No Yes 5Channel, 3-Band Parametric Yes Capable, with mixing Yes No No Yes 5Channel, 3-Band Parametric Yes Capable, with mixing Yes No No Yes Yes Yes No No Yes Yes Yes No No No None None No No N/A N/A N/A Yes Yes Yes Yes Yes Yes N/A N/A No DTEQ DTS AN163K DTS Normal Pro Logic N/A Yes Yes No N/A Yes 5 Channel, 5-Band Graphic DTS DTS N/A DTS Normal Pro Logic N/A Yes Yes No N/A Yes No DTS_6DOT1 DTS AN163L DTS, DTS-ES Normal No N/A Yes No No N/A No No Yes Yes Yes No DTS_CES DTS AN163K DTS, DTS-ES Normal No N/A No No No N/A No No Yes Yes Yes Yes No DTS_NEO6 DTS AN163N PCM Normal No N/A No No No Automatic No No Yes No Yes No No No DS339AM3 DTS_PL2 DTS, Dolby N/A DTS Normal Pro Logic II N/A Yes Yes No N/A No No Yes Yes Yes No DTS_PL2_REEQ DTS N/A DTS Normal Pro Logic II N/A Yes Yes No N/A No Re-EQ Yes Yes Yes No No DTSI DTS N/A DTS Normal No N/A Yes Yes No N/A No No Yes Yes Yes No No DTSR DTS & SRS Labs AN163F DTS Normal Pro Logic SRS TruSurround Yes Yes No N/A Yes No Yes Yes Yes No No DVDA_BASS_ MGR Only Crystal Ware AN163U M/C + Stereo PCM None No N/A Yes Yes Yes N/A Yes No Yes No Yes No No EFF Only Crystal Ware N/A No. See notes Yes, Pass-through No Automatic Yes No Yes Yes Yes No No N/A PCM Normal No Table 4. CS4932X/CS49330: AVR/Outboard Decoder Application Code Functionality and Feature Overview CS4932X/CS49330 Normal Normal No No No Capable, no mixing Normal Manual No N/A N/A Yes Automatic SRS TruSurround No Yes No Pro Logic Normal Yes No External SRAM Required DS339AM3 Code Name Required Licensing (in addition to signing of Crystal Ware Licensing Agreements) Documentation Required in Addition to CS49300 Data Sheet and AN163 Playable Input EFF_REEQ Only Crystal Ware N/A PCM EFFI Only Crystal Ware HDC Pacific Microsonics AN163D PCM See Notes No LG7 Lexicon AN163E PCM Normal No LG7_7DOT1 Lexicon AN163S PCM Normal MP3 Only Crystal Warea N/A MPEG. See Notes See Notes N/A PCM Tone Control Re-EQ/ Graphic EQ/ Parametric EQ Dual-Precision Bass Manager Karaoke Delays Contains Crystal Extra Surround which offers 6.1/7.1 channel matrix decoded output Automatic Yes Re-EQ Yes Yes Yes No No No Manual No No Yes No Yes No No No Automatic No No Yes No Yes No No No Automatic No No Yes No Yes No No No No Automatic No No Yes No Yes No No Yes No N/A No No Yes No Yes No No N/A No 5 Channel, 5-Band Graphic Yes No Yes No No Autodetection Dolby Pro Logic or Dolby Pro Logic II Virtualizer Module Downmix Dualzone Output Pink Noise Automatic Fs/ Coefficient Change for Deemphasis (for 32kHz to 48kHz) Normal No N/A No. See notes Yes, Pass-through No N/A No. See notes Yes, Pass-through N/A No Yes, Pass-through N/A No Yes, Pass-through No N/A No No N/A Yes Normal No External SRAM Required MPEQ Only Crystal Ware AN163K MPEG. See Notes Normal Pro Logic N/A Yes Yes MPG Only Crystal Ware N/A MPEG. See Notes Normal Pro Logic N/A Yes Yes No N/A Yes No Yes No Yes No No MPG_CES Only Crystal Ware N/A MPEG. See Notes Normal Pro Logic N/A No No No N/A No No Yes No Yes Yes No N/A MPEG. See Notes Normal Pro Logic II N/A Yes Yes No N/A No No Yes No Yes No No AN163F MPEG. See Notes Pro Logic SRS TruSurround Yes Yes No N/A No No Yes No Yes No No Yes Yes, Pass-through /Upsampled No Automatic No No Yes No Yes No No No Automatic No No Yes No Yes No No Yes + THX N/A Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes No No Yes + THX Bass Limiter Capable, no mixing Yes No No MPG_PL2 MPGR PDF PL2_2FS TEX TEX8 TEXO Dolby SRS Labs Dolby Dolby THX THX THX AN163I PCM Normal Normal Pro Logic N/A No AN163P PCM Normal Pro Logic II N/A Yes Yes, Pass-through /Upsampled AN163H M/C + Stereo PCM Mixer Input (5.1 + 2) None No N/A Yes Yes AN163O M/C + Stereo PCM Input (7.1) None No N/A Yes Yes Yes + THX N/A Yes 3-Band Parametric + Re-EQ AN163H M/C + Stereo PCM Mixer Input (5.1 + 2) None No N/A Yes Yes Yes + THX N/A Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes (105ms on all channels) No Yes 128K x 8, 70ns None No N/A Yes Yes Yes + THX N/A Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes (221ms on all channels) No Yes 256K x 8, 70ns THX AN163H TEXO8 THX AN163O M/C + Stereo PCM Input (7.1) None No N/A Yes Yes Yes + THX N/A Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes (105ms on all channels) No Yes 128K x 8, 70ns TEXO8_2MB THX AN163O M/C + Stereo PCM Input (7.1) None No N/A Yes Yes Yes + THX N/A Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes (221ms on all channels) No Yes 256K x 8, 70ns AN163H M/C + Stereo PCM Mixer Input (5.1 + 2) None No N/A Yes Yes Yes + THX N/A Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes No No AN163O M/C + Stereo PCM Input (7.1) Yes 3-Band Parametric + Re-EQ Yes + THX Bass Limiter Capable, no mixing Yes No No THX THX8 THX THX None No N/A Yes Yes Yes + THX N/A Table 4. CS4932X/CS49330: AVR/Outboard Decoder Application Code Functionality and Feature Overview (Continued) a.The associated licensing fees for using MPEG, Layer 3 technology licensed from Fraunhofer IIS and THOMSON multimedia are covered by the Crystal Ware Licensing Program. No additional contracts need be signed by the OEM or end-customer in order to use the MP3 firmware. 11 CS4932X/CS49330 TEXO_2MB M/C + Stereo PCM Mixer Input (5.1 + 2)