General Purpose Rectifiers 6A05-G THRU 6A10-G (RoHS Device) Voltage Range 50 to 1000 V Current 6.0 Ampere P600 Features Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic P600 Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guaranteed Polarity:Color band denotes cathode end Mounting position: Any Weight: 2.1 gram .052(1.3) DIA. .048(1.2) 1.0(25.4) MIN. .360(9.1) .340(8.6) .360(9.1) DIA. .340(8.6) 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL 6A05 6A1-G 6A2-G 6A4-G 6A6-G 6A8-G 6A10-G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TL=50 C I(AV) 6.0 A IFSM 250 A VF 1.1 V 5.0 uA 500 uA Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 6.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=100 C IR Typical junction Capacitance (Note 1) CJ Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range R JA TJ,TSTG pF 100 100 -55 to +125 NOTES : (1) Thermal Resistance junction to lead. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. Comchip Technology Corporation Tel: 510-657-8671 Fax: 510-657-8921 www.comchiptech.com o C/W o C General Purpose Rectifiers RATINGS AND CHARACTERISTIC CURVES 6A05-G THRU 6A10-G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 250 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 6.0 5.0 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 200 150 100 50 0 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 1.0 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=125 C 10 1 o TJ=25 C 0.1 0.01 0 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 FIG.5 - TYPICAL JUNCTION CAPACITANCE o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS Comchip Technology Corporation Tel: 510-657-8671 Fax: 510-657-8921 www.comchiptech.com