GG71120 ® TM ABSORPTIVE SPST SWITCH MODULES with Bias Circuit RoHS Compliant DESCRIPTION KEY FEATURES Multi Octave Frequency Ranges Hermetically Sealed Microstrip/Stripline Compatible Consistent VSWR This series of modules meets RoHS requirements per EU Directive 2002/95/EC. The standard terminal finish is gold unless otherwise specified. Consult the factory if you have special requirements. IMPORTANT: For the most current data, consult MICROSEMI’s website: Internal TTL Driver RoHS Compliant www.MICROSEMI.com Microsemi – Lowell’s switch modules provide an economical way of achieving a switch function from UHF through Ku band. These switch modules provide broadband, high performance characteristics in a small package. Our catalog parts are basic examples of our capability. We will be glad to explore your specific requirements with the goal of providing custom parts for your needs. www.MICROSEMI.com These devices are ESD sensitive and must be handled use using ESD precautions. APPLICATIONS/BENEFITS ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Drop in Module Symbol Value Unit Storage Temperature TSTG -55 to +125 ºC Operating Temperature TOP -55 to +95 ºC RF CW Power Handling PCW 0.5 W Broadband (0.5 – 18 GHz) GG71120 Copyright 2006 Rev: 2009-02-02 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 1 GG71120 ® TM ABSORPTIVE SPST SWITCH MODULES with Bias Circuit RoHS Compliant GUARANTEED ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Model Number Insertion Loss1 (dB) (Max) Isolation(dB) (Min) VSWR (Max) TRISE (Max) TFALL (Max) GG71120-01 0.5 - 4.0 1.3 45 1.7:1 1.0 1.0 GG71120-02 2.0 - 8.0 1.6 40 1.7:1 1.0 1.0 GG71120-03 4.0 - 12.4 1.9 40 1.8:1 1.0 1.0 GG71120-04 8.0 - 18.0 2.3 35 1.9:1 1.0 1.0 GG71120-05 2.0 - 18.0 2.3 35 2.0:1 1.0 1.0 Notes: 1. Required D.C. Bias: Insertion Loss, -35 mA; Isolation, +30 mA. 2. Switching Speed is measured from the 50% point of the TTL pulse to the 90/10% of the detected RF pulse with a 2 MHz maximum switching rate. 3. In the isolation state, this switch is matched at the input only. ENVIRONMENTAL ENVRONMENTAL CONDITIONS These units are designed to withstand the following environmental conditions without damage. TEST OUTLINE 210004 MIL-PRF METHOD COND. Internal Visual 883 2017 -- Stabilization Bake 883 1008 B Thermal Cycle 883 1010 B Constant Acceleration 883 2001 1 (Y1 Axis) Seal – Fine Leak 883 1014 A1 Seal – Gross Leak 883 1014 C1 External Visual 883 2009 -- NOTES Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 ELEC / MECH 1. All pins are 0.012 ±0.001" dia, 0.100" (min) long. May be supplied with tabs, 0.025 ±0.01 x 0.006 ±0.002, upon request. 2. Tolerance on 3 place decimal, ±0.003" unless otherwise specified. 3. Case and leads gold plated per MIL-G-45204, Type 3, Grade A 50 µinch (min). Copyright 2006 Rev: 2009-02-02 www.MICROSEMI.com Frequency Range SWITCHING 2 SPEED (uS) Page 2