Glass Passivated Efficient Fast Recovery Rectifier EF10C01C-G thru EF10C06C-G (RoHS Device) Voltage Range 50 to 600 V Current 10.0 Ampere Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic TO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guranteed Mounting position: Any Weight: 2.07 gram TO-220AB .113(2.87) .103(2.62) .185(4.70) .175(4.44) DIA .154(3.91) .148(3.74) .055(1.40) .045(1.14) .594(15.1) .587(14.9) .27(6.86) .23(5.84) .06(1.52) .05(1.27) MAX.412(10.5) PIN 1 2 3 .16(4.06) .14(3.56) .56(14.22) .53(13.46) .11(2.79) .10(2.54) .037(0.94) .027(0.68) 1 .105(2.67) .095(2.41) case .025(0.64) .014(0.35) 2 3 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL EF10C01C EF10C02C EF10C03C EF10C05C EF10C06C UNIT CHARACTERISTIC Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 420 V VDC 50 100 200 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TL=100 C IF(AV) 10.0 A IFSM 100 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 5.0 A VF o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR 0.95 1.25 10 uA uA nS Trr 25 Typical junction Capacitance (Note 2) CJ 65 Operating Junction and Storage Temperature Range V 250 Maximum Reverse Recovery Time (Note 1) Typical Thermal Resistance (Note 3) 1.85 R JC 2.2 TJ, TSTG -55 to + 150 NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to lead. COMCHIP TECHNOLOGY 4115 CLIPPER CT. FREMONT CA 94538 TEL: (510) 657-8671 FAX: (510) 657-8921 pF o CW o C Glass Passivated Efficient Fast Recovery Rectifier EF10C01C-G thru EF10C06C-G (RoHS Device) RATINGS AND CHARACTERISTIC CURVES EF10C01C-G THRU EF10C06C-G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 100 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 10 8 6 4 2 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 80 60 40 20 0 0 0 50 100 1 150 o 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE, C EF10C01C-G-EF10C03C-G EF10C05C-G 1.0 EF10C06C-G 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 o TJ=125 C 100 10 o 1 TJ=25 C 0.1 0 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 1000 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 100 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS COMCHIP TECHNOLOGY 4115 CLIPPER CT. FREMONT CA 94538 TEL: (510) 657-8671 FAX: (510) 657-8921