COTO 9011-05-1-11

9011, 9012 & 9091 Miniature SIP Relays
Miniature Molded SIP Reed Relays
The 9012 package dimensions are 47% smaller than standard 9000 SIPs,
yet the relay retains the 10W switch ratings of its larger counterparts.
The 9011 package dimensions is 65% smaller than the standard 9000
SIPs and incorporates the RI-70 switch rated at 3W. The 9091 is a
compact version of the 9001 while using 40% less board space. These
miniature SIP relays are ideal for use in ATE applications and other
high reliability test, measurement and telecommunications applications
where high board density and long life are key requirements.
Series Features
9012 is the smallest 10W SIP relay (.400”x .150” x .400”)
9011 is the smallest 3W SIP relay (.400”x .150” x .265”)
9091 is a 10W SIP relay measuring (.600”x .150” x .275”)
Magnetic shielding reduces interaction
Optional coil suppression diode protects coil drive circuits
UL File # E67117
High insulation resistance 1012 Ω minimum. (1013 Ω typical)
High speed switching
Molded thermoset body on integral lead frame design
High reliability, hermetically sealed contacts for long life
Model 9011
Dimensions in Inches (Millimeters)
Model 9012
30 o
Model 9091
28
COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920
6
(Europe) Tel: +31-45-5439345 / Fax +31-45-5427216
9011, 9012 & 9091 Miniature SIP Relays
Model Number
Parameters
COIL SPECS.
Nom. Coil Voltage
Max. Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
CONTACT RATINGS
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy-Typical1
Static Contact
Resistance (max. init.)
Test Conditions
Units
+/- 10%, 25° C
Must Operate by
Must Release by
VDC
VDC
Ω
VDC - Max.
VDC - Min.
9011 2,4
(3 Watt)
4 Pin SIP
5
6.5
500
3.75
0.4
9012 2,4
(10 Watt)
4 Pin SIP
12
15.0
750
9.0
1.0
5
6.5
500
3.75
0.4
12
15.0
750
9.0
1.0
90912,4
(10 Watt)
4 Pin SIP
5
12
6.5 15.0
500 1000
3.75
9.0
0.4
1.0
100
0.250
0.5
3
200
0.5
1.5
10
200
0.5
1.5
10
Signal Level 1.0V, 10mA
Volts
Amps
Amps
Watts
x 106 Ops.
250
1000
500
50mV, 10mA
Ω
0.150
0.120
0.125
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.200
0.200
0.15
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
x 1012
x 1012
x 1012
pF
pF
0.7
1.4
0.7
1.4
0.1
Between Contacts
Contacts to Coil
VDC/peak AC
VDC/peak AC
200
500
300
500
200
1500
Operate Time - including
bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave
msec.
0.35
0.35
0.5
Release Time - Typical
Zener-Diode Suppression3
msec.
0.1
0.1
0.30
Dynamic Contact
Resistance (max. init.)
RELAY
SPECIFICATIONS
Insulation Resistance
(minimum)
Capacitance - Typical
Across Open Contacts
Open Contact to Coil
Dielectric Strength
(minimum)
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
2.0
Top View:
Grid = .1"x.1" (2.54mm x 2.54mm)
Notes:
1
Consult factory for life expectancy at other switching
loads. Resistance >0.5Ω defines end of life or failure
to open.
2
Optional diode is connected to pin #2 (+) and pin
#3(-). Correct coil polarity must be observed.
3
Consists of 20V Zener-diode and 1N1002 diode
in series, connected in parallel with coil.
4
9011 external mag shield. 9012 & 9091 internal mag
shield.
Environmental Ratings:
Storage Temp:-35°C to +100°C; Operating Temp:-20°C to +85°C
Solder Temp: 270°C max; 10 sec. max
The operate and release voltage and the coil resistance are
specified at 25°C. These values vary by approximately
0.4%/°C as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com
6
E-mail: info@cotorelay.com
29