Cree® SMD LED Model # LM1-NRR1-01-N1 Data Sheet 120-degree, 3.2 x 2.8-mm, SMT LED in full color with water-transparent lens Applications • • • • Indoor and Outdoor Displays Backlighting Coupling into Light Guides RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 50 25 25 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 125 100 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C RTHJA 450 400 450 °C/W RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 300 280 300 °C/W Junction/solder point 3 chips on RTHJS 450 430 480 °C/W Forward Current Note 1 Peak Forward Current Note 2 Junction/ambient 1 chip on Note 3 Junction/ambient 3 chips on Note 3 Notes: 1. 2. 3. Single-color light. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PC Board FR 4 (pad size >=16mm2) D-CT142.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C) Values Characteristics Condition Symbol Wavelength at peak emission IF = 20 mA Dominant Wavelength IF = 20 mA Spectral bandwidth at 50% IREL max IF = 20 mA λ 24 Viewing Angle at 50% IV IF = 20 mA 2θ½ 120 Forward Voltage IF = 20 mA Luminous Intensity Reverse Current (max) IF = 20 mA VR = 5 V Unit R G B λPEAK 620 520 465 nm λDOM 610~620 520~540 460~480 nm 38 28 nm 120 120 °C V VF(avg) 2.0 3.4 3.4 VF(max) 2.5 4.0 4.0 V IV(min) 112 180 45 mcd IV(avg) 180 250 70 mcd IR 10 10 10 μA Subject to change without notice. www.cree.com/ledlamps Standard Bins for LM1-NRR1-01-N1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-NRR1-01-N1 may be filled with any or all bins contained as below. Luminous Intensity (IV) Luminous Intensity (IV) Luminous Intensity (IV) All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. T or above 280 mcd S 180 mcd R 112 mcd 610 nm Dominant Wavelength (λD) 620 nm U or above 450 mcd T 280 mcd S 180 mcd 520 nm Dominant Wavelength (λD) 540 nm R or above 112 mcd Q 71 mcd P 45 mcd 460 nm Dominant Wavelength (λD) 480 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT142.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. Graphs SPE/LM1-NRR1-01-N1 02 Graphs Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT142.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. Graphs SPE/LM1-NRR1-01-N1 02 Graphs 50% Power Angle : 0 100% 80% 60% 40% 20% -90 -30 -60 0 30 90 60 0% FAR FIELD PATTERN 70 IF(mA) 70 60 60 RED 50 RED 50 40 40 30 30 GREEN GREEN 20 20 BLUE 10 0 20 40 60 80 BLUE 10 T( C) 0 70 IF(mA) 0 100 IF(mA) T( C) 0 70 20 40 60 80 100 60 80 100 IF(mA) 60 60 RED 50 RED 50 40 40 30 30 GREEN GREEN 20 20 BLUE 10 T( C) 0 0 20 40 60 BLUE 10 80 100 T( C) 0 0 20 40 Format Copyright © 2007 Cree, Inc. All rights reserved. The information in this document 5/6 is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT142.000 #: Cree, Inc. 4600 Silicon Drive COTCO-D-074 Durham,REV.4 NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. SPE/LM1-NRR1-01-N1 02 Graphs Graphs the color coordinates of the mixed light can be expected within the area of the color triangle marked a). The color coordinates of the mixed light can be expected within the area of the color triangle marked “a)”. the achromatic pointpoint (x=0.33,y=0.33) is marked“+” The achromatic (x=0.33,y=0.33) is marked “+”. Items Signatures Date Prepared by Meiliping 2005-12-14 Rev.No Checked by XieJH 2005-12-14 02 Approved by DavidLiu 2005-12-14 FCN# Revision History Date Change Description 2005-12-14 Change IV Rank of G from R, S, T to S,T. FCN20050422 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT142.000 6/6 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Document No. Rev. No. D i m e n s i o n Draw ing Mechanical Dimensions displays SPE/LM1-NRR1-01-N1 02 All dimensions are in mm. guides lays attings at Ta = 25°C IF Absolute maximum Rating R G B 50 25 25 IFP 200 100 100 mA VR 5 5 5 V PD 125 100 100 mW Symbol Unit mA Topr -40~+100 °C Tstg -40~+100 °C Tj +110 +110 +110 °C *3 Rth JA 450 400 450 °C/W *3 Rth JA 650 580 680 °C/W on Rth JS 300 280 300 °C/W on Rth JS 450 430 480 °C/W n n width <=0.1msec duty <=1/10 *3 Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) ptical Characteristics ( Ta = 25°C) ion Condition Symbol IF=20mA IF=20mA % Irel max Notes IF=20mA Values Unit R G B Opeak 620 520 465 nm Odom 610~620 520~540 460~480 nm O 24 38 28 nm 120 120 120 Deg. IF=20mA RoHS Compliance 2 T½ The levels of environmentally sensitive, persistent persistent organic pollutants (POP), or VF(avg) 2.0 3.4 biologically 3.4 toxic (PBT), V otherwise restricted materials in this product are below the maximum concentration values (also referred to as the IF=20mA threshold limits) permitted for such in an exempted VF(max) 2.5 substances, 4.0or are used4.0 V application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended Iv through April 11221, 2006. 180 45 mcd IF=20mA (Min) 180 250 70 mcd Iv(Avg) Vision Advisory Claim VR=5V 10 10 10 PA IR Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT142.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Contact Cree Sales Description SMD 120 Full Color, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT142.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps